I have router os v 6.7
I have an MS SBS with DHCP and i need an other via Mikrotik...
I used and configured a simple DHCP on my MikrotikOS. But I can not onto the VLAN interface....
The firs try:
I use simple vlan interface via Ether1
Code: Select all
/ip address> print
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK INTERFACE
0 192.168.1.100/24 192.168.1.0 Eth1
1 192.168.10.1/24 192.168.10.0 vlan1
2 10.1.5.10/24 10.1.5.0 Wan
/interface> print
Flags: D - dynamic, X - disabled, R - running, S - slave
# NAME TYPE MTU L2MTU MAX-L2MTU
0 R Eth1 ether 1500
1 X Eth2 ether 1500
2 R Wan ether 1500
3 R vlan1 vlan 1500
My second configure:
I used bridge...
Code: Select all
/ip address> print
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK INTERFACE
0 192.168.1.100/24 192.168.1.0 Eth1
1 192.168.10.1/24 192.168.10.0 br2-vl2
2 10.1.5.10/24 10.1.5.0 Wan
/interface bridge port> print
Flags: X - disabled, I - inactive, D - dynamic
# INTERFACE BRIDGE PRIORITY PATH-COST HORIZON
0 br2-vl2 br2 0x80 10 none
/interface bridge> print
Flags: X - disabled, R - running
0 R name="br2" mtu=1500 l2mtu=65535 arp=enabled mac-address=00:0E:2E:65:39:CA
protocol-mode=none priority=0x8000 auto-mac=yes
admin-mac=00:00:00:00:00:00 max-message-age=20s forward-delay=15s
transmit-hold-count=6 ageing-time=5m
/interface bridge port> print
Flags: X - disabled, I - inactive, D - dynamic
# INTERFACE BRIDGE PRIORITY PATH-COST HORIZON
0 br2-vl2 br2 0x80 10 none
If I used "bridge form" the client get IP address from my DHCP (Mikrotik), but cant ping it and nothing from the client.
Please Help!
