What's new in 6.9 (2014-Jan-30 10:23):
*) updated bootloader firmware;
*) ppp: fixed RADIUS accounting;
*) ppp: fixed IPV6-Prefix assigning;
Re: routeros 6.9
I сonfirm. It work.What's new in 6.9 (2014-Jan-30 10:23):
*) ppp: fixed RADIUS accounting;
Re: routeros 6.9
What's new in 6.9 (2014-Jan-30 13:02):
*) lcd - added option to change the color-scheme;
*) updated bootloader firmware;
*) ppp: fixed RADIUS accounting;
*) ppp: fixed IPV6-Prefix assigning;
*) lcd - added option to change the color-scheme;
*) updated bootloader firmware;
*) ppp: fixed RADIUS accounting;
*) ppp: fixed IPV6-Prefix assigning;
Re: routeros 6.9
v6.9 also includes these changes from the unreleased v6.8:
What's new in 6.8 (2014-Jan-29 15:52):
*) bridge - default protocol-mode changed to RSTP for new bridges,
fixed bridge mac address changing when port (with lowest mac address) goes down
*) userman - improve startup time;
*) sstp client - support server name verification from certificate;
*) wireless - improved 11n and nv2 stability;
*) dhcp client - support interfaces in bridge;
*) dhcp - parse decimal strings and IP addreses in options value;
*) bgp - don't show community 'internet' in BGP advertisements;
*) ipsec - enable hardware acceleration for aes-cbc + md5|sha1|sha256 aead on tilera cpus;
*) ospf - fixed checksum calculation for OSPFv3 AS-external-LSAs;
*) default configuration - changed dhcp server lease time to 10 minutes;
*) fixed port isolation on CRSs (bug introduced in v6.6);
*) smb - added support for SMB 2.002
*) timezone information updated;
*) ppp - fixed ppp bridging (did not work since v6.6);
*) improved speed of PPP, PPPoE, PPTP & L2TP on multicore routers;
*) address-list - fix crash when adding two identical address list entries (not allowed any more);
*) fixed multicast forwarding on CCRs;
*) firewall - improved address-type matcher, and added it for ipv6 aswell;
Re: routeros 6.9
What for?!What's new in 6.9 (2014-Jan-30 13:02):
*) lcd - added option to change the color-scheme;
...
MiktoTik team should concentrate to improve main features, like wireless radio performance and stability!
Re: routeros 6.9
You did not see the other changes, did you ?What for?!What's new in 6.9 (2014-Jan-30 13:02):
*) lcd - added option to change the color-scheme;
...
MiktoTik team should concentrate to improve main features, like wireless radio performance and stability!
Re: routeros 6.9
link for tile PZ!
Last edited by Masyanich on Thu Jan 30, 2014 2:42 pm, edited 2 times in total.
Re: routeros 6.9
Of couse I have seen, but this wasted time should be purposed to improve main features of RouterOS (wireless, routing), but not colour-scheme. It's not a toy for a childrens.You did not see the other changes, did you ?
Re: routeros 6.9
Exactly ... on mikrotik webpage you can find only 6.7 and check for updates from router reports error - file not found...where to download v6.9?
?
JF.
Re: routeros 6.9
Do you have internet connectivity ?link for tile PZ!
Re: routeros 6.9
v6.9 is not released yet.
Re: routeros 6.9
What for?!What's new in 6.9 (2014-Jan-30 13:02):
*) lcd - added option to change the color-scheme;
...
ehm, we really customise outfit of the boxes placed to the customers.
our logo has white background, and even if i customise the LCD boot screen,
it does not affect the whole screen, i had black stripes over and under the company
logo. i hope this setting fixes it.
another aspect:
before the CRS it was crystal clear: dark boxes had dark colour schemes,
whereas the CCRs had white. and it was chosen automatically by routerOS.
then the CRS hit the surface in this all-white-bathroom-style colour, but with
dark LCD colour scheme by default. and unchangeable of course.
right now we have the possibility to fix this
i don't think it was of any difficulties to fix this, as the colour schemes were there anyway.
Re: routeros 6.9
Exactly what kind of improvements?*) wireless - improved 11n and nv2 stability;
Thank You Giuseppe
Re: routeros 6.9
I сonfirm. It work.What's new in 6.9 (2014-Jan-30 10:23):
*) ppp: fixed RADIUS accounting;
for me too
Re: routeros 6.9
read 6.8rc1 thread.Exactly what kind of improvements?*) wireless - improved 11n and nv2 stability;
Thank You Giuseppe
in short: some possible nv2 lockups/crash are fixed and also speed for the 802.11n might be more stable.
Re: routeros 6.9
Normis: please update http://wiki.mikrotik.com/wiki/RouterBOOT_changelog 
Re: routeros 6.9
Normis, I do not see IGMP bug fix, and it exists since IGMP Proxy exists in MikroTik. I reported busg's a few years ago!You did not see the other changes, did you ?What for?!What's new in 6.9 (2014-Jan-30 13:02):
*) lcd - added option to change the color-scheme;
...
MiktoTik team should concentrate to improve main features, like wireless radio performance and stability!
Re: routeros 6.9
We did not see any change in the port isolation on CRS using version 6.8rc1, it was still spewing traffic on other ports.
Re: routeros 6.9
ping pppoe stations still remain high, in versions prior to 6.6 ping stands at 1ms, the new 6.9 versions ping is unstable high ..
You do not have the required permissions to view the files attached to this post.
Re: routeros 6.9
I was quite confused. Version 6.8 is not brought before the release, but there is version 6.9. Stated bug fixes do not work. What's going on here at all?
Re: routeros 6.9
v6.8 was in development for 2 month, with big changes coming in PPP for all devices (especially for CCR) and IPSec HW acceleration for CCR and nv2 wireless stability improvements,
I imagine all attention was on those topics.
And when they were about to release (or released version for few hours) found serious bug with BIOS version on some mipsbe boards - if you do "/system routerboard upgrade" with that BIOS you will need to Netinstall the board, to get it back.
I was surprised that BIOS upgrade was such a common feature to find it so quickly...
Anyways, MT switched to v6.9 to avoid confusion and it should be released soon.
I imagine all attention was on those topics.
And when they were about to release (or released version for few hours) found serious bug with BIOS version on some mipsbe boards - if you do "/system routerboard upgrade" with that BIOS you will need to Netinstall the board, to get it back.
I was surprised that BIOS upgrade was such a common feature to find it so quickly...
Anyways, MT switched to v6.9 to avoid confusion and it should be released soon.
try with some actual traffic on those tunnels, not just ping - what this link is running on? wireless?ping pppoe stations still remain high, in versions prior to 6.6 ping stands at 1ms, the new 6.9 versions ping is unstable high ..
Re: routeros 6.9
Which bug fixes do not work ?I was quite confused. Version 6.8 is not brought before the release, but there is version 6.9. Stated bug fixes do not work. What's going on here at all?
-
-
stavincki1
just joined
- Posts: 12
- Joined:
Re: routeros 6.9
The IGMP proxy bug is a real problem and it would be nice if you could fix them instead of making the lcd change colors.
Re: routeros 6.9
Hi all, i can't to reach normal work of IGMP proxy for 2 or more devices.The IGMP proxy bug is a real problem and it would be nice if you could fix them instead of making the lcd change colors.
It's always need to restart IGMP proxy for taking to join for 2 or more multicast group. In MFC i have some garbige.
For one device it working good.
You do not have the required permissions to view the files attached to this post.
Re: routeros 6.9
To be fair it is very useful feature as the new setting allows for dark or light scheme. I doubt it took much development time at allOf couse I have seen, but this wasted time should be purposed to improve main features of RouterOS (wireless, routing), but not colour-scheme. It's not a toy for a childrens.You did not see the other changes, did you ?
Re: routeros 6.9 (release candidate)
I update my groove from 6.7 to 6.8, and does not start .. that I can do? turns but does not finish starting, I can not access, not reflected in winbox 
Re: routeros 6.9
I update my groove from 6.7 to 6.8, and does not start .. that I can do? turns but does not finish starting, I can not access, not reflected in winboxWhich bug fixes do not work ?I was quite confused. Version 6.8 is not brought before the release, but there is version 6.9. Stated bug fixes do not work. What's going on here at all?
Re: routeros 6.9 (release candidate)
NetinstallI update my groove from 6.7 to 6.8, and does not start .. that I can do? turns but does not finish starting, I can not access, not reflected in winbox
Sent from my SCH-I545 using Tapatalk
Re: routeros 6.9 (release candidate)
RouterBoard model:750G.
V6.9 Release, upgrade from v6.7, OVPN Server not working!
V6.9 Release, upgrade from v6.7, OVPN Server not working!
Who is online
Users browsing this forum: No registered users and 30 guests