Community discussions

MikroTik App
 
kawsar
just joined
Topic Author
Posts: 15
Joined: Tue Aug 27, 2013 12:37 pm

Ethernet 5 cannot ping ethernet 6 users..why? pls reply..

Sat Jan 11, 2014 7:16 pm

Dear all,
I'm having Mikrotik 1100 ah Router. i have two blocks ip address 192.168.0.1/24 for ethernet 5 and 192.168.7.1/24 ethernet 6. I have problem that i can't ping one block to another. what could be the problem?
 
CelticComms
Forum Guru
Forum Guru
Posts: 1765
Joined: Wed May 02, 2012 5:48 am

Re: Ethernet 5 cannot ping ethernet 6 users..why? pls reply.

Sat Jan 11, 2014 7:20 pm

Do the hosts on each of these networks have the RB1100 set as their default gateway? Do you have filters set in IP Firewall?
 
kawsar
just joined
Topic Author
Posts: 15
Joined: Tue Aug 27, 2013 12:37 pm

Re: Ethernet 5 cannot ping ethernet 6 users..why? pls reply.

Sun Jan 12, 2014 8:27 am

ip address at ethernet 5 is 192.168.7.1/24 subnet 255.255.255.0 default gateway 192.168.7.1 and dns 8.8.8.8
ethernet 6 is 192.168.0.1/24 subnet 255.255.255.0 default gateway 192.168.0.1 and dns 8.8.8.8


what is the wrong?
 
kawsar
just joined
Topic Author
Posts: 15
Joined: Tue Aug 27, 2013 12:37 pm

Re: Ethernet 5 cannot ping ethernet 6 users..why? pls reply.

Sun Jan 12, 2014 8:28 am

Do you have filters set in IP Firewall? where to set ip firewall? am new in mikro
tik...
Last edited by kawsar on Sun Jan 12, 2014 6:19 pm, edited 1 time in total.
 
efaden
Forum Guru
Forum Guru
Posts: 1708
Joined: Sat Mar 30, 2013 1:55 am
Location: New York, USA

Re: Ethernet 5 cannot ping ethernet 6 users..why? pls reply.

Sun Jan 12, 2014 1:30 pm

Post your export.

Sent from my SCH-I545 using Tapatalk
 
dancho
Frequent Visitor
Frequent Visitor
Posts: 85
Joined: Tue May 28, 2013 10:13 pm
Location: Skopje, Macedonia
Contact:

Re: Ethernet 5 cannot ping ethernet 6 users..why? pls reply.

Wed Jan 15, 2014 3:20 am

first add bridge and put ports 5 and 6 in that bridge
then put IP addresses for eth5 192.168.7.1/21 and for eth6 192.168.0.1/21

now I guess you can ping from eth5 to eth6
 
Rudios
Forum Veteran
Forum Veteran
Posts: 977
Joined: Mon Mar 11, 2013 12:58 pm
Location: The Netherlands

Re: Ethernet 5 cannot ping ethernet 6 users..why? pls reply.

Wed Jan 15, 2014 8:07 am

first add bridge and put ports 5 and 6 in that bridge
then put IP addresses for eth5 192.168.7.1/21 and for eth6 192.168.0.1/21

now I guess you can ping from eth5 to eth6
This is not the solution.
If ports are bridged, they are supposed to be in the same broadcast domain.
Both ether5 and ether6 should be single configured, each with an IP address.
 
kawsar
just joined
Topic Author
Posts: 15
Joined: Tue Aug 27, 2013 12:37 pm

Re: Ethernet 5 cannot ping ethernet 6 users..why? pls reply.

Tue Jan 21, 2014 5:51 am

ok, I shall try it..
 
abubaker
just joined
Posts: 9
Joined: Mon Apr 01, 2013 4:13 pm
Contact:

Re: Ethernet 5 cannot ping ethernet 6 users..why? pls reply.

Thu Jan 30, 2014 3:22 pm

Add Nat rule to accept scr-address and dst-address
 
kawsar
just joined
Topic Author
Posts: 15
Joined: Tue Aug 27, 2013 12:37 pm

Re: Ethernet 5 cannot ping ethernet 6 users..why? pls reply.

Tue Feb 25, 2014 5:44 am

Do the hosts on each of these networks have the RB1100 set as their default gateway? Do you have filters set in IP Firewall?