Hello!

Let's say there's a scenario where we have two gateways balanced and everything works perfectly.

Does anyone know a way to accurately mark and send all traffic made with speed tests at speedtest.net through only one of those gateways? **Including Uploads**

One of those gateways is dedicated and has a lot more upload speed than the other. So the goal would be routing speedtests through it so our customers get them results well.

Any help will be greatly appreciated, thanks in advance

regards.

Mark route with dst-address of speedtest server like this:

/ip firewall mangle add chain=prerouting dst-address-list=speedtest action=mark-routing new-routing-mark=speedtest

Add all ip address of speedtes in the address list calle speddtest

Then select the gateway of your wan

Sent from my mobile phone with Tapatalk

Mark route with dst-address of speedtest server like this:

/ip firewall mangle add chain=prerouting dst-address-list=speedtest action=mark-routing new-routing-mark=speedtest

Add all ip address of speedtes in the address list calle speddtest

Then select the gateway of your wan

Sent from my mobile phone with Tapatalk

Thanks, In fact I've done this already but the problem relays on finding which addresses belong to the test servers. I mean dinamically.

http://forum.mikrotik.com/viewtopic.php?f=2&t=81311

In this post you can add the address of speedtest in an address list and then mark routing

Sent from my mobile phone with Tapatalk

http://forum.mikrotik.com/viewtopic.php?f=2&t=81311

In this post you can add the address of speedtest in an address list and then mark routing

Sent from my mobile phone with Tapatalk

this may really help! Thanks a lot!