Fresh config, set the Senao interface to station (default) and specify the SSID. No encryption or anything fancy.
Cisco AP352 is running factory defaults. Set SSID to non-broadcast.
The senao client will not associate with the AP with the hidden ssid.
Set the Cisco AP to broadcast SSID - works.
Using a Atheros based card - works.
Using RouterOS 2.8.28 - works.
Log output (from 2.9.25):
Code: Select all
00:11:20 wireless,debug wlan1: STA starts scanning m.
00:11:21 wireless,debug wlan1: STA scan over, results:
00:11:21 wireless,debug 00:40:96:56:2D:8B: on 2462 SSID
\00\00\00\00\00\00\00\00 caps 0x21 rates 0xf basic 0x1 MT: no
00:11:21 wireless,debug wlan1: must select network m.
00:11:21 wireless,debug wlan1: no network that satisfies connect-list, by
default choose with strongest signal
00:11:21 wireless,debug wlan1: failed to select network
00:11:21 wireless,debug wlan1: delaying scanning tom.