What is happening guys ?

rauf · Fri Jun 23, 2006 12:22 pm

We have one RB 232 Access point and one station . Problem that on access point signal appears on back side but not antenna side. According examples of Mikrotik all station must be direct to Access point . Our access point without direction each other not working.
How it will work if we will have any building between routers ? Where is trouble ? Why external antenna not working? I sent supout file to Mikrotik but I did't received required answer.
Please help .

proxy · Fri Jun 23, 2006 5:42 pm

take a look at the antenna mode , it can be set to ant-a & ant-b this may help u.

rauf · Fri Jun 23, 2006 8:16 pm

We changed antenna but we could't get a effect ,,,,unfortunatelly

What else we can do ?

changeip · Fri Jun 23, 2006 8:37 pm

We changed antenna but we could't get a effect ,,,,unfortunatelly :(
What else we can do ?

In wireless configuration change the antenna-mode from ant-a to ant-b, or visa versa. Maybe you have the pigtail on the wireless card connected to AUX? Like proxy said above...

Sam

NZLamb · Sun Jun 25, 2006 11:05 pm

What type of wireless card are you using? I have noticed some types of card can only transmit from one antenna connector. Also check the pigtails as the Ufl connectors are very easy to accidentally damage.

rauf · Mon Jun 26, 2006 8:20 am

Thank you for your answer . Tomorrow I am going to test it again. I will post all the result and also answer to all question.

rauf · Mon Jun 26, 2006 2:37 pm

Guys I noticed as you said there one thin pigtail connected in motherboard like this :

http://www.mikrotik.com/Documentation/ric522E.pdf

What must I do ?

rauf · Tue Jun 27, 2006 11:38 am

Guys my wireless card's name is RouterBoard RD 52 . IS there any problem with this card ?

Tue Jun 27, 2006 11:48 am

I guess, R52 wireless card.
R52 wireless cards works fine.
Well, for antenna-mode=ant-a, you have to connect antenna pigtail to the inside connector (that is closer to the wireless card center), for antenna-mode=ant-b connect pigtail to another connector.

rauf · Tue Jun 27, 2006 2:13 pm

Thank you to all and especial thanks to Sergejs. It realy helped me.

What is happening guys ?

What is happening guys ?

Who is online