Problem with zcom xg-622H

brasileottanta · Wed Jun 28, 2006 10:01 am

Hi guys ,

anyone have tested this card with RB112 ?

We have a lot of problem , in B/G mixed mode , no connect to other client , only in B or in G work , but pinging directly the wireless card the time is non accettable ( random 5- to 145 ms .. )

Bye

hebeda · Thu Jun 29, 2006 6:15 pm

if you use the card with routerboard , do you have a proper powersupply ? under heavy load is this card is sucking up to 1500mA

brasileottanta · Sat Jul 01, 2006 9:23 am

if you use the card with routerboard , do you have a proper powersupply ? under heavy load is this card is sucking up to 1500mA

We use a passive POE at 48V ( original equipment from mikrotik ) . But , we have change the antenna , from omni to panel , and now work fine .

Thank's

brasileottanta · Sat Jul 01, 2006 7:49 pm

no work again ....

but now we know why ... we have our installation on tv-broadcaster tower , we the broadcaster is off , every things work . When go on , not work ... interference on motherboard ??

abuomer59 · Fri Aug 04, 2006 3:02 pm

Sure ,the TV station usually uses a high power up to 4KW RF output so the harmonics of this signal may interfer with your signal so you can use 2.4 GHz filter from http://www.hyperlinktech.com.
Regards

Problem with zcom xg-622H

Problem with zcom xg-622H

Who is online