v6.12 released

Tue Apr 15, 2014 3:12 pm

What's new in 6.12

*) l2tp - fixed ~no buffer space available~ problem;
*) ipsec - support IPv4 over IPv6 and vice versa;
*) pppoe - report correctly number of active links;
*) updated timezone information;
*) many fixes for CRS managed switch functionality -
particularly improved VLAN support, port isolation, defaults;
*) added trunk support for CRS switches;
*) added policing support for CRS switches;
*) www - added support for HTTP byte ranges;
*) lte - provide signal strength using snmp and make 'info once' work in console;

Simply click “Check for updates” in QuickSet, Webfig or Winbox packages menu. If you run v5 or older, download the newest NPK package from our webpage, upload to your router, and reboot: http://www.mikrotik.com/download

rextended · Tue Apr 15, 2014 3:17 pm

Ticket#2014031766000331
6.10 BUG: user-manager profile limitation can not add profile limitation on command line when default admin customer are renamed, because missing "owner=" parameter.

This bug is still present on last official 6.11.
Still exist on 6.12rc1 2014-04-02
I try the other 2 bug I have discovered later
Still exist on 6.12rc1 (2014-Apr-07 09:04):

STILL EXIST ON 6.12
http://forum.mikrotik.com/viewtopic.php ... 88#p416454

BUG SIGNALED FROM 6.10 AND STILL NOT FIXED???

Opened another ticket for that: [Ticket#2014041566000226] 6.12 UNFIXED BUG: user-manager profile limitation

OK, I UNDERSTAND,
is more important to fix CRS than this "limited" option....

I wait the fix on 6.13....

Chupaka · Tue Apr 15, 2014 3:38 pm

*) updated timezone information;

-3 is still +3:

[admin@TestPlace] > /system clock print 
            time: 15:37:53
            date: apr/15/2014
  time-zone-name: Etc/GMT-3
      gmt-offset: +03:00

this exists even in v5

kcybulski · Tue Apr 15, 2014 3:45 pm

So far good

Upgraded on RB2011UAS and RB2011L no problems so far.
Packet marks work on RB2011UAS.

Krzysiek

CyberTod · Tue Apr 15, 2014 3:54 pm

RouterOS upgraded fine from v6.11 to v6.12 on a RB951Ui-2HnD, but upgrading the routerboard firmware from 3.12 to 3.14 caused a series of reboot loops before it settled and started working.
Anyone else seeing this ? Because that was my router at home, so no harm done, but I plan to upgrade a few Metal 2SHPn on towers to see if a problem on them is fixed .

P.S. Hmm actually forget the part about the Metal's. i just upgraded 1, but their firmware stays at 3.13.

Tue Apr 15, 2014 3:57 pm

Chupaka, why don't you just use your city? That one works always

ros code

[admin@auto] /system clock> set time-zone-name=Europe/Minsk
[admin@auto] /system clock> print
            time: 15:56:32
            date: apr/15/2014
  time-zone-name: Europe/Minsk
      gmt-offset: +03:00

pcunite · Tue Apr 15, 2014 4:02 pm

*) www - added support for HTTP byte ranges;

That sounds interesting. Can someone give me a link to the doc's on that?

rextended · Tue Apr 15, 2014 4:05 pm

THIS KERNEL BUG ARE NOT SOLVED ON 6.12 (final)!!!

http://forum.mikrotik.com/viewtopic.php ... 00#p417272

Tue Apr 15, 2014 4:06 pm

*) www - added support for HTTP byte ranges;
That sounds interesting. Can someone give me a link to the doc's on that?

http://www.cyberciti.biz/cloud-computin ... line-test/

Tue Apr 15, 2014 4:07 pm

*) www - added support for HTTP byte ranges;
That sounds interesting. Can someone give me a link to the doc's on that?

RFC2616 section 14.35.1 (see here).

Chupaka · Tue Apr 15, 2014 4:10 pm

Sorry, had missed this before. Did you submit a ticket? I wonder how we missed this.

sure, Ticket#2011111666000887. Maris said, "problem will be fixed in one of the next versions". I'm waiting that version for 2,5 years already

UPD: I also mentioned this problem in Ticket#2013121166000256

Chupaka, why don't you just use your city? That one works always

I know, but there were recent changes in Belarus timezone, and TZ info was not actual in RouterOS until the december, 2013

rextended · Tue Apr 15, 2014 4:21 pm

This version has just come out, and for now there are three old ticket still unresolved:

Ticket#2014031766000331 (2014-03-17) Missing parameters on CLI
Ticket#2014032566001217 (2014-03-25) KERNEL CRASH / PANIC

doneware · Tue Apr 15, 2014 4:22 pm

l2tp - fixed ~no buffer space available~ problem;

no buffer problem still seems to persist in 6.12.
but this time it's not related to l2tp. i have a box with GRE over IPSec tunnels
(~80 tunnels) and run BGP over them.
just had to restart the device 4 hours ago because of "no buffer space avail".

Tue Apr 15, 2014 4:27 pm

just had to restart the device 4 hours ago because of "no buffer space avail".

Hm... 6.12 was officially announced less then 4 hours ago...

Tue Apr 15, 2014 4:37 pm

l2tp - fixed ~no buffer space available~ problem;
no buffer problem still seems to persist in 6.12.
but this time it's not related to l2tp. i have a box with GRE over IPSec tunnels
(~80 tunnels) and run BGP over them.
just had to restart the device 4 hours ago because of "no buffer space avail".

If you have it running for more than 4 hours, it could mean you are not running the version that was just released now. Upgrade to the one on the webpage please.

Tue Apr 15, 2014 4:55 pm

rextended, please do NOT re-post all the fixed issues here. Post only NOT fixed issues if you find any. Thanks!

doneware · Tue Apr 15, 2014 5:01 pm

just had to restart the device 4 hours ago because of "no buffer space avail".
Hm... 6.12 was officially announced less then 4 hours ago...

it was the 6.12 from 11th april. Normis posted the url to it in one of the other threads. checked the changelog,
and as it stated the buffer space issue to be fixed, i gave it a try. now i am running the official image
(build date: Apr/14/2014 09:27:45)

efaden · Tue Apr 15, 2014 5:14 pm

When can we expect more complete documentation with examples for the CRS?

dtoffo · Tue Apr 15, 2014 5:23 pm

What about CAPsMAN (wireless-fp package): is it still beta or production-stable?

DiabolixZA · Tue Apr 15, 2014 5:58 pm

*) lte - provide signal strength using snmp and make 'info once' work in console;

SNMP for LTE signal strength, but yet we see nothing for CCQ..

adyb76 · Tue Apr 15, 2014 6:55 pm

RB450, RB2011UiAS-2HnD, RB1100AHX2, CCR1036-12G-4S all updated ok

Running PPPoE, OSPF, MPLS and TE

Ade

rextended · Tue Apr 15, 2014 7:39 pm

rextended, please do NOT re-post all the fixed issues here. Post only NOT fixed issues if you find any. Thanks!

Sorry, I have posted that for prevent question like "Are fixed this problem....?" not written on change log.

Tue Apr 15, 2014 9:35 pm

I can give a nickname to this version "CRS Evolution version" it is good that these changes got out as soon as possible, now at least we can start using CRS properly.
I'm sure there will be other version with other fixes soon enough. And if MT fixes your bug you usually can get a RC version to verify that bug is solved.

Now i have lots of new toys in "Switch" menu

JanezFord · Tue Apr 15, 2014 10:07 pm

Winbox checkboxes and textboxes are back to pre v6.11 style .... good work! I see new switch menu design in winbox on crs125.

upgraded crs125, 450g, 711ua-2hnd, 751u-2hnd, 751g-2hnd, 951g-2hnd, 951ui-2hnd, 2011uas-rm, 2011uas-2hnd-in 912u-2hnd and rb800 to 6.12 + firware where applicable without any issues. All running fine (ipsec, ospf, l2tp)

JF.

dlj87 · Tue Apr 15, 2014 11:00 pm

OpenVPN server doesn't work! The same TLS failed error in log as it was in 6.11. Downgrade to 6.10

plankanater · Tue Apr 15, 2014 11:38 pm

Still loosing interfaces in /Interface Bridge Filters. It will take the interface in the rule then after about 3 seconds after hitting apply it will minimize the interface field on the general page. If I reopen the field it is still, but re-minimizes as soon as OK, or Apply is hit. So the ability to mark packets by interface in a bridge seems to be lost.

Jetrider · Wed Apr 16, 2014 12:07 am

Anyone tried DHCP server on VLAN with this ? Is all fine now ?

rextended · Wed Apr 16, 2014 12:12 am

Anyone tried DHCP server on VLAN with this ? Is all fine now ?

Try yourself and post the result.

lorsungcu · Wed Apr 16, 2014 2:07 am

6.12 completely broke my ipsec/l2tp tunnels. Not sure what the problem is at this point, but i'll be moving back to 6.11 until i figure it out..

efaden · Wed Apr 16, 2014 2:09 am

6.12 completely broke my ipsec/l2tp tunnels. Not sure what the problem is at this point, but i'll be moving back to 6.11 until i figure it out..

Interesting. Mine are working just fine.

Wed Apr 16, 2014 5:41 am

6.12 completely broke my ipsec/l2tp tunnels. Not sure what the problem is at this point, but i'll be moving back to 6.11 until i figure it out..
Interesting. Mine are working just fine.

For the first time since about 6.5 upgrading DID NOT break my IPSEC tunnels

Thanks Mikrotik.

evharten · Wed Apr 16, 2014 5:56 am

6.12 broke my CRS's, had to go into serial console to reset configuration and build the config as new, system just hangs after updating.

Another CRS hangs even after the reset-configuration, im trying to reproduce it so i can get an supout (if that works at least, since the switch disables ALL ports when it hangs).

Addenum:
Trunk feature does not work properly, trunk stops forwarding packages after some time (802.11ad LACP), after removing and recreating the trunk it works for a while, and then stops working again.

chimaster · Wed Apr 16, 2014 7:33 am

Upgrade to 6.12 FW 3.13 no worries on CCR1016-12G. Had major L2TP issues with 6.11 rolled back to 6.6 and have now updated to 6.12 to test L2TP Buffer space issue is resolved.

Five Hours in. So far so good... Fingers crossed for a full recovery from two weeks of absolute instability.

Aveyer · Wed Apr 16, 2014 8:19 am

Upgraded from 5.26 to 6.12 on RB750GL and RB450G, so far so good.

npero · Wed Apr 16, 2014 8:20 am

Ticket#2014032466000827 not fixed, it is not working in last couple version, also other user on forum confirm bug.
When it will be fixed ?

Jetrider · Wed Apr 16, 2014 9:19 am

Try yourself and post the result.

Sorry, unable to comply. Every version since 6.5 has been a huge disappointment so far resulting major outages. Cannot risk that production environment device. To be honest this "try yourself and post result" attitude got me thinking, that maybe I should fix it myself, too. Or simply not use DHCP maybe ?

tedkuban · Wed Apr 16, 2014 9:23 am

IPSEC was totally broken after upgrade from 6.11 and from 5.26. Comments in the changelog on need of changes in a config are absent.

evharten · Wed Apr 16, 2014 9:38 am

Try yourself and post the result.

Sorry, unable to comply. Every version since 6.5 has been a huge disappointment so far resulting major outages. Cannot risk that production environment device. To be honest this "try yourself and post result" attitude got me thinking, that maybe I should fix it myself, too. Or simply not use DHCP maybe ?

This is the community forums, IF you have bugs that you want fixed you should email support, if something breaks during/after an upgrade you can email support for support (or the company that have sold you the unit).

Here people will say try it, and post results, as that is what we all do

Community is willing to help you, but if you did not try it first yourself, there is nothing we can help, as we do not know your situation nor configuration.
And new features, or bugfixes are fixed (maybe not but thats something WE as community test).

ps. this is not to flame at you! we are merely trying to help you.

infused · Wed Apr 16, 2014 11:01 am

CRS test unit on 6.12 runs sweet as.

evharten · Wed Apr 16, 2014 11:04 am

CRS test unit on 6.12 runs sweet as.

You did not have to reset the configuration ?

evharten · Wed Apr 16, 2014 11:16 am

Trunk failure ticket #2014041666000341

Includes the supout.rif at the time of failure.
after disabling one of the interfaces in the trunk it starts working again, seems that the trunk option is not yet 802.11ad compliant.

bootc · Wed Apr 16, 2014 11:58 am

6.12 broke my CRS's, had to go into serial console to reset configuration and build the config as new, system just hangs after updating.

Another CRS hangs even after the reset-configuration, im trying to reproduce it so i can get an supout (if that works at least, since the switch disables ALL ports when it hangs).

I was running a 6.12rc and it was working fine. Upgraded to 6.12 release and it hung on reboot, and comes up with all ports disabled. I can login at the serial console but commands like

/interface print

just hang. Reset-configuration works (eventually) but putting my config back breaks it after a reboot.

I too am working on a reproducible config that breaks the CCR. I hope to be able to post something soon.

firefly · Wed Apr 16, 2014 12:05 pm

when will be fixed bonding (LACP) on CRS125?

http://forum.mikrotik.com/viewtopic.php ... 94#p396127
http://forum.mikrotik.com/viewtopic.php?f=2&t=79334

bootc · Wed Apr 16, 2014 12:25 pm

6.12 broke my CRS's, had to go into serial console to reset configuration and build the config as new, system just hangs after updating.

Another CRS hangs even after the reset-configuration, im trying to reproduce it so i can get an supout (if that works at least, since the switch disables ALL ports when it hangs).
I too am working on a reproducible config that breaks the CCR. I hope to be able to post something soon.

The following configuration sets up the CRS for a fall, but still works at this point after a reboot:

/interface ethernet
set [ find default-name=ether2 ] master-port=ether1
set [ find default-name=ether3 ] master-port=ether1
set [ find default-name=ether4 ] master-port=ether1
set [ find default-name=ether5 ] master-port=ether1
set [ find default-name=ether6 ] master-port=ether1
set [ find default-name=ether7 ] master-port=ether1
set [ find default-name=ether8 ] master-port=ether1
set [ find default-name=ether9 ] master-port=ether1
set [ find default-name=ether10 ] master-port=ether1
set [ find default-name=ether11 ] master-port=ether1
set [ find default-name=ether12 ] master-port=ether1
set [ find default-name=ether13 ] master-port=ether1
set [ find default-name=ether14 ] master-port=ether1
set [ find default-name=ether15 ] master-port=ether1
set [ find default-name=ether16 ] master-port=ether1
set [ find default-name=ether17 ] master-port=ether1
set [ find default-name=ether18 ] master-port=ether1
set [ find default-name=ether19 ] master-port=ether1
set [ find default-name=ether20 ] master-port=ether1
set [ find default-name=ether21 ] master-port=ether1
set [ find default-name=ether22 ] master-port=ether1
set [ find default-name=ether23 ] master-port=ether1
set [ find default-name=ether24 ] master-port=ether1
set [ find default-name=sfp1 ] master-port=ether1
/interface vlan
add interface=ether1 vlan-id=1
add interface=ether1 vlan-id=1000
/interface ethernet switch
set forward-unknown-vlan=no
/interface ethernet switch vlan
add ports=ether1,ether2,switch1-cpu vlan-id=1
add ports=ether23,ether24 vlan-id=1000

Adding the following will appear to "work" after it's been added (it doesn't due to the lack of matching egress config, but would work if that was added too), but causes the switch to fail at reboot:

/interface ethernet switch ingress-vlan-translation
add new-customer-vid=1 ports=ether1,ether2
add new-customer-vid=1000 ports=ether23,ether24

killersoft · Wed Apr 16, 2014 12:52 pm

NTP Client seems to still have an issue(as of 6.11, v6.10 had no issues) on MT Metals 2SHPn's(WILL NOT SET System clock time).
My RB951G(v5.26) on the same subnet with the same NTP config has no issue with setting the system time.
Think it might be Supout.rif time... !

Wed Apr 16, 2014 1:19 pm

NTP Client seems to still have an issue(as of 6.11, v6.10 had no issues) on MT Metals 2SHPn's(WILL NOT SET System clock time).
My RB951G(v5.26) on the same subnet with the same NTP config has no issue with setting the system time.
Think it might be Supout.rif time... !

did you try another server ?

infused · Wed Apr 16, 2014 1:23 pm

CRS test unit on 6.12 runs sweet as.
You did not have to reset the configuration ?

I hardly had any config. The config I had worked fine though.

bawolek · Wed Apr 16, 2014 1:44 pm

what about with link aggregation (802.3ad) doing on switch-chip ..
i'm waiting for that on CRS ...

Fatum · Wed Apr 16, 2014 2:03 pm

@bawolek
http://wiki.mikrotik.com/wiki/Manual:CR ... s#Trunking

hengst · Wed Apr 16, 2014 2:37 pm

BUG ?

dhcp request via radius.

wont send anything to radius server when "Called ID" is used. ( nothing in log )

without anything in the "Called ID" , radius request is sent to radius server and all ok.

typo somwhere ? caller id / called id ? just my 2 cents

Krisken · Wed Apr 16, 2014 3:26 pm

Is the DHCP server problem for vlans fixed?

Zorro · Wed Apr 16, 2014 3:30 pm

all RB2011's and 951's so far so good.
not tested 450g, 433 and AP's yet, but kinda enthusiastically about.
found its both boots and works faster(and marginal but very welcome and handy latency drop) and also L2 filtering on copper start working again(cool !! no need to use v5.xx in such cases anymore).
i guess that's was new routerboard firmware impact.
also thanks for fixing fields in firewall management, back ).
previous versions (both 6.10 and 6.11)was looped into panic-reboot/netinstall after upgrade on some of rb2011 bodies. some right after reboot, some - after firmware update. 6.12 is okay on ALL, cool(no downtime is cool, isn't ?

p.s.
any chance to get CoDel in future releases ?

pateutz · Wed Apr 16, 2014 3:49 pm

Hi all,

after upgrade from 6.11 to 6.12 the IPSEC tunnels not working any more. I have downgraded back to 6.11 and now i am able to make connections to my IPSEC VPN tunnels.
I have defined the the configuration of the IPSEC VPN tunnels since version 5. So since then i have never change anything in the configuration.

Best Regards,

Daniel

paoloaga · Wed Apr 16, 2014 3:52 pm

6.12 broke my CRS's, had to go into serial console to reset configuration and build the config as new, system just hangs after updating.
Another CRS hangs even after the reset-configuration, im trying to reproduce it so i can get an supout (if that works at least, since the switch disables ALL ports when it hangs).
I was running a 6.12rc and it was working fine. Upgraded to 6.12 release and it hung on reboot, and comes up with all ports disabled. I can login at the serial console but commands like
Code: Select all
/interface print
just hang. Reset-configuration works (eventually) but putting my config back breaks it after a reboot.

I too am working on a reproducible config that breaks the CCR. I hope to be able to post something soon.

I am experiencing the very same problem. The switch seems to run fine with the default config, but as soon as I add some vlan features (ingress vlan translation and egress vlan translation) works for a few minutes and then hangs. It also keeps hanging at the boot, responds to the console but it doesn't execute "/print interface ethernet".

I'm working to generate a supout.rif.

Edit: it doesn't execute "/interface ethernet print" -- apologize for the typo.

Chupaka · Wed Apr 16, 2014 4:22 pm

Anyone tried DHCP server on VLAN with this ? Is all fine now ?

Is the DHCP server problem for vlans fixed?

what was the problem? I have a CCR with DHCP Servers on VLANs, it worked fine on v6.7 and it works now on v6.12

huntah · Wed Apr 16, 2014 7:15 pm

DHCP on VLAN was also working on 6.11.. I am using it right now without problems. I reported that back in 6.11 released topic..

Clauu · Wed Apr 16, 2014 7:35 pm

Good job devs team now with the latest update the usb power is much more stable

I have almost 1 day uptime of a usb 3g modem where on <=6.11 it was a nightmare no more than 2hours of uptime

Test471 · Wed Apr 16, 2014 8:55 pm

What's new in CAPsMAN 6.12?

bawolek · Wed Apr 16, 2014 9:15 pm

@bawolek
http://wiki.mikrotik.com/wiki/Manual:CR ... s#Trunking

thanks I don't read wiki with crs option

ners · Wed Apr 16, 2014 9:57 pm

CRS on 6.12, ip addresses on physical interfaces ("native VLAN") stopped working:

ros code

/ip address
add address=172.16.16.8/24 interface=ether24 network=172.16.16.0
/interface ethernet
set [ find default-name=sfp1 ] master-port=ether24
set [ find default-name=ether1 ] master-port=ether24
set [ find default-name=ether2 ] master-port=ether24
set [ find default-name=ether3 ] master-port=ether24
set [ find default-name=ether4 ] master-port=ether24
set [ find default-name=ether5 ] master-port=ether24
set [ find default-name=ether6 ] master-port=ether24
set [ find default-name=ether7 ] master-port=ether24
set [ find default-name=ether8 ] master-port=ether24
set [ find default-name=ether9 ] master-port=ether24
set [ find default-name=ether10 ] master-port=ether24
set [ find default-name=ether11 ] master-port=ether24
set [ find default-name=ether12 ] master-port=ether24
set [ find default-name=ether13 ] master-port=ether24
set [ find default-name=ether14 ] master-port=ether24
set [ find default-name=ether15 ] master-port=ether24
set [ find default-name=ether16 ] master-port=ether24
set [ find default-name=ether17 ] master-port=ether24
set [ find default-name=ether18 ] master-port=ether24
set [ find default-name=ether19 ] master-port=ether24
set [ find default-name=ether20 ] master-port=ether24
set [ find default-name=ether21 ] master-port=ether24
set [ find default-name=ether22 ] master-port=ether24
set [ find default-name=ether23 ] master-port=ether24

/interface ethernet switch
set drop-if-invalid-or-src-port-not-member-of-vlan-on-ports="ether1,ether2,ether3,ether4,ether5,ether6,ether7,ether8,ether9,ether10,\
    ether11,ether12,ether13,ether14,ether15,ether16,ether17,ether18,ether19,ether20,ether21,ether22,ether23,ether24" \
    forward-unknown-vlan=no
/interface ethernet switch egress-vlan-tag
add tagged-ports=ether24 vlan-id=59
/interface ethernet switch ingress-vlan-translation
add customer-vid=0 new-customer-vid=59 ports=ether1 sa-learning=yes
/interface ethernet switch vlan
add ports=ether1,ether24 vlan-id=59

172.16.16.8 cannot be pinged from other hosts in the network.

h17 · Wed Apr 16, 2014 10:21 pm

Anyone tried DHCP server on VLAN with this ? Is all fine now ?

Is the DHCP server problem for vlans fixed?
what was the problem? I have a CCR with DHCP Servers on VLANs, it worked fine on v6.7 and it works now on v6.12

Same here. I've been using DHCP Servers on VLANs at home since version 3.x, through almost every one
till now (6.11, didn't upgrade to 6.12 yet - I'm on vacation). I've never spotted any single problem with this.
Tested on 433AH, 435GUAH, 450G, 1100AHx2 and CCR1036-12G-4S.

P.S.
This is my first post here. Hello everyone.

dibatech · Wed Apr 16, 2014 11:12 pm

CCR1016-12G
Strange vlan issue.
Added vlan 1286 on ether12 via winbox.
Close winbox, reopen, vlan now missing.
Under vlans tab in interfaces setup, there is a ppp-XXXX dynamic user listed??
Seems like the vlan interface name / index however mikrotik does it gets corrupted.

Resetted board to defaults, restored config from rsc export. Same result.
Downgraded to 6.7 and all seems well again.

Could not create supout.rif, as this unit was in production at the time and clients was going crazy.
Will try and recreate again and log ticket.

Aveyer · Thu Apr 17, 2014 1:19 am

I'm using DHCP on vlans on RB750GL and RB450G, no issues at all.

ddt · Thu Apr 17, 2014 3:22 am

Old VLAN code working on 6.11:

/interface ethernet switch ingress-vlan-translation
add customer-vid=0 new-customer-vid=701 ports=ether2 sa-learning=yes
/interface ethernet switch egress-vlan-translation
add customer-vid=701 new-customer-vid=0 ports=ether2

This correctly exports on a CRS still running 6.11.

New export code of the above if put into 6.12:

/interface ethernet switch ingress-vlan-translation
add customer-vid=0 new-customer-vid=701 ports=ether2 sa-learning=yes
/interface ethernet switch egress-vlan-translation
add customer-vid=701 new-customer-vid="(unknown)" ports=ether2

If more than one entry is in the egress field with "(unknown)" the router will freeze on bootup during the "Starting services" display output on the LCD.

littlebill · Thu Apr 17, 2014 6:42 am

is pptp and winbox fixed? how about sstp and windows clients? did anyone confirm this working? its been broken a while

Aveyer · Thu Apr 17, 2014 7:22 am

On one of my RB450G', opening the OSPF menu causes winbox to crash everytime. This doesn't happen on all the rest that I upgraded however, which are in production.
This router wasn't in production, it was connected directly to laptop.

I had to reset to defaults and reconfigure, then no more crashing.

mboy · Thu Apr 17, 2014 8:10 am

New export code of the above if put into 6.12:
Code: Select all
/interface ethernet switch ingress-vlan-translation
add customer-vid=0 new-customer-vid=701 ports=ether2 sa-learning=yes
/interface ethernet switch egress-vlan-translation
add customer-vid=701 new-customer-vid="(unknown)" ports=ether2
If more than one entry is in the egress field with "(unknown)" the router will freeze on bootup during the "Starting services" display output on the LCD.

I have the same problem, what can be done?

ners · Thu Apr 17, 2014 8:42 am

Old VLAN code working on 6.11:
Code: Select all
/interface ethernet switch ingress-vlan-translation
add customer-vid=0 new-customer-vid=701 ports=ether2 sa-learning=yes
/interface ethernet switch egress-vlan-translation
add customer-vid=701 new-customer-vid=0 ports=ether2
This correctly exports on a CRS still running 6.11.

New export code of the above if put into 6.12:
Code: Select all
/interface ethernet switch ingress-vlan-translation
add customer-vid=0 new-customer-vid=701 ports=ether2 sa-learning=yes
/interface ethernet switch egress-vlan-translation
add customer-vid=701 new-customer-vid="(unknown)" ports=ether2
If more than one entry is in the egress field with "(unknown)" the router will freeze on bootup during the "Starting services" display output on the LCD.

Just delete the following section altogether:

ros code

/interface ethernet switch egress-vlan-translation
add customer-vid=701 new-customer-vid="(unknown)" ports=ether2

I found out setting egress-vlan-translation is not needed to make the port "access" anymore. Just "ingress-vlan-translation" is all that needs to be set.

cdiedrich · Thu Apr 17, 2014 8:49 am

after upgrade from 6.11 to 6.12 the IPSEC tunnels not working any more. I have downgraded back to 6.11 and now i am able to make connections to my IPSEC VPN tunnels.
I have defined the the configuration of the IPSEC VPN tunnels since version 5. So since then i have never change anything in the configuration.

Cannot confirm this.
We have some (three) 2011UiAS managing about 25 IPSEC site2site tunnels (talking to Cisco ASA, Cisco 3005 and RB2011s) and after upgrade to 6.12 they're running perfectly.
It even seems that IKE handshake is gotten faster.

Clauu · Thu Apr 17, 2014 9:31 am

Good job devs team now with the latest update the usb power is much more stable I have almost 1 day uptime of a usb 3g modem where on <=6.11 it was a nightmare no more than 2hours of uptime

Ok so unfortunately happened again

now it will last for ~ 1day and after that reset occurs again..

iossol · Thu Apr 17, 2014 12:41 pm

RB2011UAS stops responding some hours after upgrade from 6.11 to 6.12.
The System is used as a l2tp/ipsec dialin Router with Radius.

The System is placed in a Colocation Center, I'm actually waiting for some Info or a powercycle from the Centers Support Staff.

The Router was pretty stable up to RouterOS 6.7, after that it becomes a nightmare.

cdiedrich · Thu Apr 17, 2014 12:54 pm

Just a cosmetic one:

Bridge filters show up incompletely in Winbox.
Creating/editing rules works perfectly. But in the list view the Interface columns are empty.
When reopening a rule in Winbox the appropriate sections come up collapsed but when opening them, the interfaces are there.
Everything shows up correctly in console/telnet/ssh/winbox console.

remojames · Thu Apr 17, 2014 1:27 pm

I had problem with Kernel panic and after upgrade firmware to 3.13 everything is ok now

gotsprings · Thu Apr 17, 2014 2:53 pm

Yup...

On vacation and clicked on Download and Upgrade 6.12 for my Home CRS.
It's off line now.

Guess I will get to try to fix this on Friday when I get home. Please put up a warning. AS it seems a few others have seen the same thing with CRS.

pcunite · Thu Apr 17, 2014 2:55 pm

I had to reset to defaults and reconfigure, then no more crashing.

That is the secret to fixing many user level issues. The parsing engine is really to blame for most troubles.

iossol · Thu Apr 17, 2014 3:31 pm

RB2011UAS stops responding some hours after upgrade from 6.11 to 6.12.
The System is used as a l2tp/ipsec dialin Router with Radius.

The System is placed in a Colocation Center, I'm actually waiting for some Info or a powercycle from the Centers Support Staff.

The Router was pretty stable up to RouterOS 6.7, after that it becomes a nightmare.

Just a short update:
Touchpanel was responsive, but no packets on any ethernet port. Looks like the switch stops working.
After powercycle, normal access was possible.
Config reset is not possible, since the RB2011 is in an external Colocation Center which is 3 hours away from my office.
For now a backup 2011 with RouterOS 6.7 is in production and the other one has to wait for 6.13 or for my next visit.

Aveyer · Thu Apr 17, 2014 3:40 pm

I had to reset to defaults and reconfigure, then no more crashing.
That is the secret to fixing many user level issues. The parsing engine is really to blame for most troubles.

It's strange, there was no problem with the other 3 in production that were upgraded, just the one on my desk which was preconfigured for deployment to another site.

So it's like OSPF messed up on this one because OSPF didn't get to connect to the network.

brainy · Thu Apr 17, 2014 3:47 pm

Anyone tried DHCP server on VLAN with this ? Is all fine now ?

Is the DHCP server problem for vlans fixed?
what was the problem? I have a CCR with DHCP Servers on VLANs, it worked fine on v6.7 and it works now on v6.12

The problem was with dhcp server on vlan interface(s) on bonding-interface(s) giving wrong netmasks.

Zorro · Thu Apr 17, 2014 5:30 pm

about winbox crashing - try import really messy/complex stuff into any part of config and it crash.
probably parser was slightly memory-limited to do some things.
for example importing updated pgl.yoyo.org adslist to blackhole advertisers or lists of red-flagged(botnet pandemic or persistently ran offensive payloads)segments of internet - can, due to lenght.

jondavy · Thu Apr 17, 2014 5:48 pm

all pppoe and vpls interfaces are disappeared , but still working,
was using version 6.11 CCR-1-1612G, now updated to version 6.12, and how it has all ok

kotsius · Thu Apr 17, 2014 9:14 pm

SSTP problems still persist:

We have SSTP server-client interconnections between 6 MT routers, all of which share *exactly* the same settings. After upgrading them to v6.12, some pairs would connect without problems, others however would disconnect after roughly one minute, mostly returning a "negotiation timeout" on the server side. There was no obvious pattern, some pairings would work, others simply wouldn't. PPP profile encryption is set to "no", but "yes" failed just as well. Changing keepalive timeouts on both sides had no visible effect, nor had disabling certificate verification.

We are now back to v6.6, having already tried most in between versions...

ndbjorne · Fri Apr 18, 2014 12:14 am

SSTP problems still persist:

We have SSTP server-client interconnections between 6 MT routers, all of which share *exactly* the same settings. After upgrading them to v6.12, some pairs would connect without problems, others however would disconnect after roughly one minute, mostly returning a "negotiation timeout" on the server side. There was no obvious pattern, some pairings would work, others simply wouldn't. PPP profile encryption is set to "no", but "yes" failed just as well. Changing keepalive timeouts on both sides had no visible effect, nor had disabling certificate verification.

We are now back to v6.6, having already tried most in between versions...

6 MT routerboards connect to SSTP server, after upgrading them all to 6.12 connections continuosly reset after 2m.

...
22:45:09 sstp,ppp,info sstp-out1: connected 
22:47:08 sstp,ppp,info sstp-out1: terminating... - conn timeout 
22:47:08 sstp,ppp,info sstp-out1: disconnected 
22:47:08 sstp,ppp,info sstp-out1: initializing... 
22:47:08 sstp,ppp,info sstp-out1: connecting... 
22:47:09 sstp,ppp,info sstp-out1: authenticated 
22:47:10 sstp,ppp,info sstp-out1: connected 
22:49:09 sstp,ppp,info sstp-out1: terminating... - conn timeout 
22:49:09 sstp,ppp,info sstp-out1: disconnected 
22:49:09 sstp,ppp,info sstp-out1: initializing... 
22:49:09 sstp,ppp,info sstp-out1: connecting... 
22:49:10 sstp,ppp,info sstp-out1: authenticated 
22:49:11 sstp,ppp,info sstp-out1: connected
...

Downgraded server back to 6.11: tunnels now seem stable.

Bye

stefan803 · Fri Apr 18, 2014 12:29 am

Hi,

I can see the same here for 3 sstp links, always a reconnect after 2 minutes saying "terminating... - conn timeout" in the logs of the client.

A link from Windows to the router using sstp seems not to be reset after 2 minutes.

humppa · Fri Apr 18, 2014 8:18 am

RB951G-2HnD
Too many records in Log:

XX:XX:XX:XX:XX:XX@wlan1: disconnected, group key exchange timeout
wlan1: data from unknown device XX:XX:XX:XX:XX:XX, sent deauth

where XX:XX:XX:XX:XX:XX exactly my device.

dtoffo · Fri Apr 18, 2014 9:09 am

OpenVPN server doesn't work! The same TLS failed error in log as it was in 6.11. Downgrade to 6.10

for me a 6.9 with ovpn server functioning, upgraded to 6.10 or 6.11 had TLS error, upgraded to 6.12 (with no configuration changes) works ok

d.

dtoffo · Fri Apr 18, 2014 9:12 am

What about CAPsMAN (wireless-fp package): is it still beta or production-stable?

What's new in CAPsMAN 6.12?

Anyone from Mikrotik support can give just a word about CAPsMAN ?

d.

rextended · Fri Apr 18, 2014 12:14 pm

What about CAPsMAN (wireless-fp package): is it still beta or production-stable?

Read:

Wireless test package which includes the new CAPsMAN feature (Controlled AP system manager).

Anyone from Mikrotik support can give just a word about CAPsMAN ?

Search:

http://forum.mikrotik.com/viewtopic.php?f=7&t=82032
http://wiki.mikrotik.com/wiki/Manual:CAPs_Manager

tmorrison88 · Fri Apr 18, 2014 5:49 pm

There is still a bug in RouterOS 6.12 that was introduced in RouterOS 6.11 regarding bridge filter rules. I've found if you create bridge filter rules specifying an interface, the interface shown will go into hidden/minimized state in Winbox. The interface is still there and bridge filter is working but there is this hidden effect that is happening.

Create the bridge filter rule with bridge/interface specified. Double click on that same rule you had just created. There is a drop down arrow (menu field collapse/expand arrow) specifying the interface it will show as minimized, vs having that drop down arrow always maximized showing you what is applied on that rule.

ncd · Fri Apr 18, 2014 7:27 pm

I was running a 6.12rc and it was working fine. Upgraded to 6.12 release and it hung on reboot, and comes up with all ports disabled. I can login at the serial console but commands like
Code: Select all
/interface print
just hang. Reset-configuration works (eventually) but putting my config back breaks it after a reboot.

I too am working on a reproducible config that breaks the CCR. I hope to be able to post something soon.
I am experiencing the very same problem. The switch seems to run fine with the default config, but as soon as I add some vlan features (ingress vlan translation and egress vlan translation) works for a few minutes and then hangs. It also keeps hanging at the boot, responds to the console but it doesn't execute "/print interface ethernet".

I'm working to generate a supout.rif.
I already send support.rif to support, waiting to anwser...

I've tried this a few times today with 6.12 and it's not just print in the interface section that will cause it to lock up, exporting config also causes the device to hard lock up.

Should add I started with a clean configuration and then applied the config bit by bit, the entire config was accepted without error but lockups occurred when printing out to confirm it had been interpreted.

rpingar · Fri Apr 18, 2014 8:14 pm

There is still a bug in RouterOS 6.12 that was introduced in RouterOS 6.11 regarding bridge filter rules. I've found if you create bridge filter rules specifying an interface, the interface shown will go into hidden/minimized state in Winbox. The interface is still there and bridge filter is working but there is this hidden effect that is happening.

Create the bridge filter rule with bridge/interface specified. Double click on that same rule you had just created. There is a drop down arrow (menu field collapse/expand arrow) specifying the interface it will show as minimized, vs having that drop down arrow always maximized showing you what is applied on that rule.

+1

regards
Ros

elmer · Fri Apr 18, 2014 9:14 pm

RouterOS 6.x don`t have "/interface ethernet poe" command?
My RB from MUM Italy still looks like that

rextended · Fri Apr 18, 2014 10:53 pm

RouterOS 6.x don`t have "/interface ethernet poe" command?
My RB from MUM Italy still looks like that

Elmer, devi andate in interface / ethernet / ether10 / PoE

ros code

[admin@MATRIX] /system package> print
Flags: X - disabled 
 #   NAME                     VERSION                    SCHEDULED              
 0   routeros-mipsbe          6.12                                              
 1   system                   6.12                                              
 2 X ipv6                     6.12                                              
 3   wireless                 6.12                                              
 4   hotspot                  6.12                                              
 5   dhcp                     6.12                                              
 6 X mpls                     6.12                                              
 7 X routing                  6.12                                              
 8   ppp                      6.12                                              
 9   security                 6.12                                              
10   advanced-tools           6.12                                              
11   user-manager             6.12                                              
12   ntp                      6.12
[admin@MATRIX] /system routerboard> print
       routerboard: yes
             model: RB951Ui-2HnD
     serial-number: [...]
  current-firmware: 3.14
  upgrade-firmware: 3.14
[admin@MATRIX] /interface ethernet poe> print
            ;;; PPPoE client
          name: ether5
       poe-out: auto-on
  poe-priority: 10

tkgit · Sat Apr 19, 2014 1:44 am

how about "random missing interface"
2014040766000072

janel · Sat Apr 19, 2014 9:40 pm

I've tried this a few times today with 6.12 and it's not just print in the interface section that will cause it to lock up, exporting config also causes the device to hard lock up.
Should add I started with a clean configuration and then applied the config bit by bit, the entire config was accepted without error but lockups occurred when printing out to confirm it had been interpreted.

Same thing here, after upgrade the router is stuck at "Starting services" on the LCD and all the ports are disabled. Reset configuration, reboot, paste the whole config (I have tried to remove /interface ethernet switch egress-vlan-translation - the same) and everything works until the next reboot.

Downgraded to 6.11 which is at least stable if not secure.

That's on the CRS125-24G-1S.

Upgraded just fine on 951G-2HnD, 751G-2HnD and 951Ui-2HnD.

armandfumal · Sat Apr 19, 2014 10:41 pm

DHCP on VLAN was also working on 6.11.. I am using it right now without problems. I reported that back in 6.11 released topic..

same for me DHCP on vlan is working for me...

rpingar · Sun Apr 20, 2014 12:54 am

Ticket#2014041966000282

pppoe client present into the list of eoip interface, and some new eoip interface disappear.
Seems a problem of mismatch interface id. Very weird bahavior.

regards
Ros

Dadon · Sun Apr 20, 2014 4:37 am

There is still a bug in RouterOS 6.12 that was introduced in RouterOS 6.11 regarding bridge filter rules. I've found if you create bridge filter rules specifying an interface, the interface shown will go into hidden/minimized state in Winbox. The interface is still there and bridge filter is working but there is this hidden effect that is happening.

Create the bridge filter rule with bridge/interface specified. Double click on that same rule you had just created. There is a drop down arrow (menu field collapse/expand arrow) specifying the interface it will show as minimized, vs having that drop down arrow always maximized showing you what is applied on that rule.
+1

regards
Ros

+1

telepro · Sun Apr 20, 2014 4:41 am

SSTP problems still persist:

We have SSTP server-client interconnections between 6 MT routers, all of which share *exactly* the same settings. After upgrading them to v6.12, some pairs would connect without problems, others however would disconnect after roughly one minute, mostly returning a "negotiation timeout" on the server side. There was no obvious pattern, some pairings would work, others simply wouldn't. PPP profile encryption is set to "no", but "yes" failed just as well. Changing keepalive timeouts on both sides had no visible effect, nor had disabling certificate verification.

We are now back to v6.6, having already tried most in between versions...

Also experiencing same problem. In our environment: 50+ identical 951G, each acting as SSTP clients, and single 1100AHx2 as SSTP server. Have submitted a Ticket#2014031866000446 ago with Supout files from both client and server sides, logs from both clients and servers, and wireshark recordings. Some connections work for extended periods of time. Others will loop with ~ 2 minute connection, disconnect, the reconnect for ~ 2 minutes...

Have not found stable configuration with 6.5 or later.

infused · Sun Apr 20, 2014 11:32 am

Any issues with CCR reported on 6.12?

rpingar · Sun Apr 20, 2014 11:43 am

Any issues with CCR reported on 6.12?

Ticket#2014041966000282

pppoe client present into the list of eoip interface, and some new eoip interface disappear.
Seems a problem of mismatch interface id. Very weird bahavior.

regards
Ros

skibi82 · Sun Apr 20, 2014 12:36 pm

Super LACP has been added ond CRS and when it will be implemented protocol support xSTP [STP / RSTP / MSTP / ....]?

Of course, talking about the hardware switch

omidkosari · Sun Apr 20, 2014 3:17 pm

CRS port leaking bug does not fixed

staslabs · Sun Apr 20, 2014 9:32 pm

In 6.12 ver. is not stable work NSTREME from new wireless+capsman package.

After downgrade to 6.9 links work fine again.

evharten · Mon Apr 21, 2014 6:18 am

When copy'ing an file from an NAS, the cpu peaks to 100% and stays there, why ? i do not use any firewall or other rules just basic switching.
It completely slows all traffic.

Supout.rif in Ticket#2014042166000116

EDIT: 100% usage is also present without traffic at all.

MadEngineer · Mon Apr 21, 2014 10:41 am

/log print shows current time (time of log in) as 07:xx:xx

/system clock shows time of 19:xx:xx

Timezone (pacific/auckland), GMT Offset (+12), SNTP Client and dates on newly created files are all correct. Checked with another Mikrotik device on an earlier release and it shows the log times as being correct. Anyone else got this?

elmer · Mon Apr 21, 2014 1:50 pm

RouterOS 6.x don`t have "/interface ethernet poe" command?
My RB from MUM Italy still looks like that

Elmer, devi andate in interface / ethernet / ether10 / PoE

ros code

[admin@MATRIX] /system package> print
Flags: X - disabled 
 #   NAME                     VERSION                    SCHEDULED              
 0   routeros-mipsbe          6.12                                              
 1   system                   6.12                                              
 2 X ipv6                     6.12                                              
 3   wireless                 6.12                                              
 4   hotspot                  6.12                                              
 5   dhcp                     6.12                                              
 6 X mpls                     6.12                                              
 7 X routing                  6.12                                              
 8   ppp                      6.12                                              
 9   security                 6.12                                              
10   advanced-tools           6.12                                              
11   user-manager             6.12                                              
12   ntp                      6.12
[admin@MATRIX] /system routerboard> print
       routerboard: yes
             model: RB951Ui-2HnD
     serial-number: [...]
  current-firmware: 3.14
  upgrade-firmware: 3.14
[admin@MATRIX] /interface ethernet poe> print
            ;;; PPPoE client
          name: ether5
       poe-out: auto-on
  poe-priority: 10

How about poe firmware upgrade, still showing 0.0 version...

mtmx80 · Mon Apr 21, 2014 5:36 pm

RB2011UAS issues after upgrade to v6.12:

- Dynamic routing protocols registered routes wrongly after first start. A simple reboot resolves this issue.
- Ports are flapping. There is a very short outage every few minutes. SNMP monitoring agents on servers sends tons of alerts. There is no RX/TX errors, but there are packet lost even on LAN.

- Inconsistent / bad auto negotiation. Router side see 1Gbps or 10Mbps Half, server runs on 100Mbps FD. After disabling/enabling ports change advertised rates, then restore to default (select all) it looks normally on both side. - (1Gbps FD)

rextended · Mon Apr 21, 2014 6:45 pm

How about poe firmware upgrade, still showing 0.0 version...

From 6.7 PoE firmware is bundled on RouterOS, you not need more to update PoE firmware....

BUT

PoE firmware can be upgraded only on RB750UP and on OmniTIK UPA-5HnD (both max 1A for each port, but 2A max total, all port monitorable)
RB2011 "i" variants and RB951Ui-2HnD have only simple PoE out (500mA max not monitorable).

BanjoJay · Mon Apr 21, 2014 9:39 pm

I have notice some problems with PPPoE. It seems to be terminating the link alot. I just got my CCR and have only try using 6.12 so far. Is there a downgrade version that works better? Right now unless I can get the link stable I am going to have to pull it out of my network. My old netgear router works fine so it does not seem to be on my ISP side of things. Any help would be great!
I have include my config so far. I do not have any firewall rules yet since I am just now trying to bring it up.

/interface bridge
add admin-mac=D4:CA:6D:FA:72:E1 auto-mac=no l2mtu=1588 name=bridge-local

/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=\
20/40mhz-ht-above disabled=no distance=indoors hide-ssid=yes l2mtu=2290 \
mode=ap-bridge ssid=**** wireless-protocol=802.11

/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk mode=\
dynamic-keys wpa-pre-shared-key=****** wpa2-pre-shared-key=*****

/ip pool
add name=dhcp ranges=192.168.88.50-192.168.88.254

/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge-local lease-time=10m name= default

/interface pppoe-client
add ac-name="" add-default-route=yes allow=pap,chap,mschap1,mschap2 \
default-route-distance=1 dial-on-demand=no disabled=no interface=\
ether1-gateway keepalive-timeout=60 max-mru=1480 max-mtu=1480 mrru=\
disabled name=pppoe-out1 password=******* profile=default service-name="" \
use-peer-dns=yes user=******

/interface bridge port
add bridge=bridge-local interface=ether2-master-local
add bridge=bridge-local interface=wlan1

/interface bridge settings
set use-ip-firewall=yes use-ip-firewall-for-pppoe=yes

/ip address
add address=192.168.88.1/24 comment="default configuration" interface=\
ether2-master-local network=192.168.88.0

/ip dhcp-server network
add address=192.168.88.0/24 comment="default configuration" dns-server=192.168.88.1 gateway=192.168.88.1

/ip firewall nat
add action=masquerade chain=srcnat comment="default configuration" out-interface=pppoe-out1

pitr · Mon Apr 21, 2014 10:01 pm

For me the PPTP server broke in 6.12. Nothing in the logging after "TCP connection".
Downgraded to 6.10, since it's the last version where both PPTP and OpenVPN work.

estdata · Tue Apr 22, 2014 7:31 am

Please, do the time, I upgrading 6.12, 6.10 in addition before was it and then forget about it, the community began believing it. so mince IPTV. thing igmp proxy. And no longer can also ssh port forwarding does not work, do the thing when the redirect to the local ip address, if you want from the outside in

bysard · Tue Apr 22, 2014 8:22 am

Still using version 5.26. I think I will skip RoS 6 all together, because this is ridicilous. Normis, you need another list of bugs, should we name a few?

Chupaka · Tue Apr 22, 2014 12:20 pm

Normis, you need another list of bugs, should we name a few?

sure! don't keep silence!

Tue Apr 22, 2014 12:22 pm

Please make sure you open a new ticket in support@mikrotik.com for each issue, this will guarantee that we check them out and fix them as well. Forum is for user discussions, and things can get lost here (no issue tracking)

Tue Apr 22, 2014 12:28 pm

Why mikrotik cannot keep official buglist on their webpage with report date and expected solution version? Also the improvement list and expected delivery version would be good. It should be centalized so everyone could know what is going on so we can plan our own actions.

Tue Apr 22, 2014 12:31 pm

Why mikrotik cannot keep official buglist on their webpage with report date and expected solution version? Also the improvement list and expected delivery version would be good. It should be centalized so everyone could know what is going on so we can plan our own actions.

Somebody needs to verify these reports first.

Tue Apr 22, 2014 12:38 pm

Of course. Therefore it should be only in your hands. But actualized for us to let us know.

Tue Apr 22, 2014 12:39 pm

Of course. Therefore it should be only in your hands. But actualized for us to let us know.

We are thinking of some solution for this, it has been requested before.

npero · Tue Apr 22, 2014 12:57 pm

Normis what about Ticket#2014032466000827 almost one month pass no answer.

Zito · Tue Apr 22, 2014 1:01 pm

RB2011UAS issues after upgrade to v6.12:
- Ports are flapping. There is a very short outage every few minutes. SNMP monitoring agents on servers sends tons of alerts. There is no RX/TX errors, but there are packet lost even on LAN.

100mbit ports flaps when CPU get 100% load, try to disable some unused features. I disable l7-filter from my firewall rules and ports are stable.

wiyat · Tue Apr 22, 2014 1:21 pm

Hi
Mikrotik professional

I dont know if you have this problem or not but I post here with the objetive that you test on your network and if you have the same problem please report with Mikrotik.

Situation:
The btest to PPPoE Client Interface from some CCR with Firmware different I get less MB

vihai · Tue Apr 22, 2014 1:48 pm

Ticket#2014042266000516

I've just upgraded a VPN concentrator to 6.12 and discovered that the intermediate certificate is not being sent anymore.

Previously (6.11) the root certificate was also incorrectly sent, but ignored by the clients, now neither is sent, thus breaking client connections.

Here is the s_client output for 6.11:

vihai@seviolab:~$ openssl s_client -connect vpn1dev.sevio.it:443
CONNECTED(00000003)
depth=2 C = IL, O = StartCom Ltd., OU = Secure Digital Certificate Signing, CN = StartCom Certification Authority
verify error:num=19:self signed certificate in certificate chain
verify return:0
---
Certificate chain
 0 s:/description=O52Gm9gv4K7FoF9c/C=IT/ST=Monza Brianza/L=Seveso/O=Utility Line Italia S.R.L./CN=*.sevio.it/emailAddress=hostmaster@sevio.it
   i:/C=IL/O=StartCom Ltd./OU=Secure Digital Certificate Signing/CN=StartCom Class 2 Primary Intermediate Server CA
 1 s:/C=IL/O=StartCom Ltd./OU=Secure Digital Certificate Signing/CN=StartCom Class 2 Primary Intermediate Server CA
   i:/C=IL/O=StartCom Ltd./OU=Secure Digital Certificate Signing/CN=StartCom Certification Authority
 2 s:/C=IL/O=StartCom Ltd./OU=Secure Digital Certificate Signing/CN=StartCom Certification Authority
   i:/C=IL/O=StartCom Ltd./OU=Secure Digital Certificate Signing/CN=StartCom Certification Authority
---

Here is the s_client output for 6.12:

vihai@seviolab:~$ openssl s_client -connect vpn1dev.sevio.it:443
CONNECTED(00000003)
depth=0 description = O52Gm9gv4K7FoF9c, C = IT, ST = Monza Brianza, L = Seveso, O = Utility Line Italia S.R.L., CN = *.sevio.it, emailAddress = hostmaster@sevio.it
verify error:num=20:unable to get local issuer certificate
verify return:1
depth=0 description = O52Gm9gv4K7FoF9c, C = IT, ST = Monza Brianza, L = Seveso, O = Utility Line Italia S.R.L., CN = *.sevio.it, emailAddress = hostmaster@sevio.it
verify error:num=27:certificate not trusted
verify return:1
depth=0 description = O52Gm9gv4K7FoF9c, C = IT, ST = Monza Brianza, L = Seveso, O = Utility Line Italia S.R.L., CN = *.sevio.it, emailAddress = hostmaster@sevio.it
verify error:num=21:unable to verify the first certificate
verify return:1
---
Certificate chain
 0 s:/description=O52Gm9gv4K7FoF9c/C=IT/ST=Monza Brianza/L=Seveso/O=Utility Line Italia S.R.L./CN=*.sevio.it/emailAddress=hostmaster@sevio.it
   i:/C=IL/O=StartCom Ltd./OU=Secure Digital Certificate Signing/CN=StartCom Class 2 Primary Intermediate Server CA
---

vihai · Tue Apr 22, 2014 1:50 pm

Ticket#2014042266000552

I have a very basic configuration involving VRFs:

/ip address
add address=192.168.1.1/24 interface=ether2 network=192.168.1.0
/ip dhcp-client
add add-default-route=no dhcp-options=hostname,clientid disabled=no \
    interface=ether1
/ip route
add distance=1 gateway=192.168.1.1 scope=10
/ip route vrf
add interfaces=ether2 routing-mark=VRF

The interface with DHCP client receives an address in the 192.168.1.0/24 network which is perfectly legal.

If, however, it gets such an address major issues arise:

Packets that whould be going to the default route (in the main table) are dropped as if the default is missing.


[admin@BACO] > ping 8.8.8.8
HOST                             SIZE TTL TIME  STATUS
                                                no route to host
                                                no route to host
    sent=2 received=0 packet-loss=100%

[admin@BACO] > /ip route print
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
 #      DST-ADDRESS        PREF-SRC        GATEWAY            DISTANCE
 0 ADC  192.168.1.0/24     192.168.1.1     ether2                    0
 1 ADC  192.168.1.0/24     192.168.1.143   ether1                    0

Adding an explicit /32 to 8.8.8.8 does not help.

vihai · Tue Apr 22, 2014 2:12 pm

Also... minor issue not worth opening a ticket.... downgrading from 6.12 to 6.11 removes server certificate from OpenVPN server

vihai · Tue Apr 22, 2014 2:27 pm

Also.... 6.12, removing an intermediate/CA certificate has no effect, it is still sent to the client until reboot.

iqt · Tue Apr 22, 2014 3:00 pm

What happened to /certificate sign-ca ... in 6.12?

samsung172 · Tue Apr 22, 2014 7:22 pm

Ticket#2014042266000552

I have a very basic configuration involving VRFs:
Code: Select all
/ip address
add address=192.168.1.1/24 interface=ether2 network=192.168.1.0
/ip dhcp-client
add add-default-route=no dhcp-options=hostname,clientid disabled=no \
    interface=ether1
/ip route
add distance=1 gateway=192.168.1.1 scope=10
/ip route vrf
add interfaces=ether2 routing-mark=VRF
The interface with DHCP client receives an address in the 192.168.1.0/24 network which is perfectly legal.

If, however, it gets such an address major issues arise:

Packets that whould be going to the default route (in the main table) are dropped as if the default is missing.
Code: Select all
[admin@BACO] > ping 8.8.8.8
HOST                             SIZE TTL TIME  STATUS
                                                no route to host
                                                no route to host
    sent=2 received=0 packet-loss=100%

[admin@BACO] > /ip route print
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,
B - blackhole, U - unreachable, P - prohibit
 #      DST-ADDRESS        PREF-SRC        GATEWAY            DISTANCE
 0 ADC  192.168.1.0/24     192.168.1.1     ether2                    0
 1 ADC  192.168.1.0/24     192.168.1.143   ether1                    0
Adding an explicit /32 to 8.8.8.8 does not help.

add a dst=0.0.0.0/0 to Your route add?

You are missing default GW, and cannot Reach anyting else than Your 192 net.

vihai · Tue Apr 22, 2014 7:28 pm

Ticket#2014042266000981

I setup a SSTP client connecting to a server with a properly signed wildcard certificate (CN=*.sevio.it).

The server is correctly sending the certificates chain.

The client is configured to use the server's hostname vpn1dev.sevio.it.

The client connects, the server's certificate is verified successfully, however the connection is dropped and the log reads:

18:17:37 sstp,info vpn3: initializing...
18:17:37 sstp,info vpn3: connecting...
18:17:38 sstp,info vpn3: terminating... - server's IP address does not match certificate
18:17:38 sstp,info vpn3: disconnected

vihai · Tue Apr 22, 2014 8:01 pm

add a dst=0.0.0.0/0 to Your route add?

You are missing default GW, and cannot Reach anyting else than Your 192 net.

No, I'm not missing it, I forgot to re-enable the DHCP client default route after trying to add a static default route. The issue remains.

[admin@BACO] > /ip route print
Flags: X - disabled, A - active, D - dynamic, 
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, 
B - blackhole, U - unreachable, P - prohibit 
 #      DST-ADDRESS        PREF-SRC        GATEWAY            DISTANCE
 0  DC  192.168.1.0/24     192.168.1.1     ether2                  255
 1 ADS  0.0.0.0/0                          192.168.1.1               0
 2 ADC  192.168.1.0/24     192.168.1.143   ether1                    0

[admin@BACO] > ping 8.8.8.8   
HOST                                     SIZE TTL TIME  STATUS                 
                                                        no route to host       
                                                        no route to host

samsung172 · Tue Apr 22, 2014 10:16 pm

add a dst=0.0.0.0/0 to Your route add?

You are missing default GW, and cannot Reach anyting else than Your 192 net.

No, I'm not missing it, I forgot to re-enable the DHCP client default route after trying to add a static default route. The issue remains.

[admin@BACO] > /ip route print
Flags: X - disabled, A - active, D - dynamic, 
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, 
B - blackhole, U - unreachable, P - prohibit 
 #      DST-ADDRESS        PREF-SRC        GATEWAY            DISTANCE
 0  DC  192.168.1.0/24     192.168.1.1     ether2                  255
 1 ADS  0.0.0.0/0                          192.168.1.1               0
 2 ADC  192.168.1.0/24     192.168.1.143   ether1                    0

[admin@BACO] > ping 8.8.8.8   
HOST                                     SIZE TTL TIME  STATUS                 
                                                        no route to host       
                                                        no route to host

does yor default Routing table or Your vrf tabel have the Gateway?

congo · Tue Apr 22, 2014 10:24 pm

On my home router (RB951G) v6.12 is crashing every few days, since installed.
I cannot recommend to use it in production.

stefan803 · Wed Apr 23, 2014 12:03 am

SSTP problems still persist:

We have SSTP server-client interconnections between 6 MT routers, all of which share *exactly* the same settings. After upgrading them to v6.12, some pairs would connect without problems, others however would disconnect after roughly one minute, mostly returning a "negotiation timeout" on the server side. [...]

Just noticed two things:
a) For me with 6.12 it started to drop sstp-connections every 2 minutes... then at some point it stopped this and worked... whyever
b) now I noticed when setting the "keepalive-timeout" on the client to same value the connection starts reconnecting every "keepalive-timeout" x 2, so setting the keepalive timeout to 10 for example it starts to reconnect every 20 seconds

vihai · Wed Apr 23, 2014 12:10 am

does yor default Routing table or Your vrf tabel have the Gateway?

The defaul route is installed in the main table by the DHCP client. A static route does the same, however.

The VRF is pretty empty, just an interface with a single static IP address.

BTW, if I disable the interface in the VRF and release the DHCP acquired address it, sometimes, start working. If I boot with the interface in the VRF altready disable and enable it afterwise it works.

It's clearly a bug.

jondavy · Wed Apr 23, 2014 12:29 am

I scheduled a script I /system reboot at dawn to uninstall a package that is not used "wireless" in the morning just gone all pppoe-outs, vpls and bridges and all interfaces again be named as factories ether1 ... ether13 was using version 6.12 on a RB1100AH, then went back to version 5.26 that this seemingly more stable...

tkgit · Wed Apr 23, 2014 12:58 am

I scheduled a script I /system reboot at dawn to uninstall a package that is not used "wireless" in the morning just gone all pppoe-outs, vpls and bridges and all interfaces again be named as factories ether1 ... ether13 was using version 6.12 on a RB1100AH, then went back to version 5.26 that this seemingly more stable...

do you use IGMP proxy or PIM?

thedoc · Wed Apr 23, 2014 1:07 am

b) now I noticed when setting the "keepalive-timeout" on the client to same value the connection starts reconnecting every "keepalive-timeout" x 2, so setting the keepalive timeout to 10 for example it starts to reconnect every 20 seconds

Same problem here with one connection. 3 x the timeout of the client side disconnect the sstp tunnel.
Strange thing is that many (40 pcs) SSTP tunnels keep on running perfect at same system
Server is 6.12
Clients are always 5.x version and never 6.x

jondavy · Wed Apr 23, 2014 2:34 am

I scheduled a script I /system reboot at dawn to uninstall a package that is not used "wireless" in the morning just gone all pppoe-outs, vpls and bridges and all interfaces again be named as factories ether1 ... ether13 was using version 6.12 on a RB1100AH, then went back to version 5.26 that this seemingly more stable...
do you use IGMP proxy or PIM?

no, not yet used pim igmp proxy or, more future we intend to use, had a similar problem with our main router a CCR, which also disappeared all pppoe clients and vpls interfaces.

samsung172 · Wed Apr 23, 2014 10:16 am

does yor default Routing table or Your vrf tabel have the Gateway?
The defaul route is installed in the main table by the DHCP client. A static route does the same, however.

The VRF is pretty empty, just an interface with a single static IP address.

BTW, if I disable the interface in the VRF and release the DHCP acquired address it, sometimes, start working. If I boot with the interface in the VRF altready disable and enable it afterwise it works.

It's clearly a bug.

Well. i still cant tell the problem. unless you force the vrf to "leak" to main table- it should not work trough Your default Gateway. - It should be total separate and just Reach it own routes.

fievel · Wed Apr 23, 2014 11:29 am

I can confirm that the issue with openvpn server with option "Require client certificate" not working anymore (bug found in 6.11) (http://forum.mikrotik.com/viewtopic.php?f=2&t=83203) is fixed in version 6.12 BUT you have to delete and re-import your certificates.

NathanA · Thu Apr 24, 2014 8:47 am

In 6.12 ver. is not stable work NSTREME from new wireless+capsman package.

After downgrade to 6.9 links work fine again.

Why did you downgrade? In 6.12, the wireless-fp/CAPsMAN package is completely optional. In fact, it's not even the default. Even if you install it, you can always go back to the old wireless package without downgrading the whole OS.

-- Nathan

Thu Apr 24, 2014 10:12 am

Any issues with CCR reported on 6.12?
Ticket#2014041966000282

pppoe client present into the list of eoip interface, and some new eoip interface disappear.
Seems a problem of mismatch interface id. Very weird bahavior.

regards
Ros

This problem should be fixed in RotuterOS v6.13. You can get links to the development version from the Mikrotik account server.

Thu Apr 24, 2014 10:22 am

In 6.12 ver. is not stable work NSTREME from new wireless+capsman package.

After downgrade to 6.9 links work fine again.

This problem is fixed in the newer RouterOS test builds RouterOS v6.13rc7 - you can get it from the development section in your Mikrotik Account server.

McTedson · Thu Apr 24, 2014 1:38 pm

Running some IPIP/IPSEC tunnels between some sites with RIP over them.
Routing tables show up ok on each router/site, but no traffic goes over the tunnels...
Funny thing is the routers do show up on IP/Neighbours, so MDP seems to be working between therm, but nothing else works.
Downgrading to 6.11 gets it working again.

afink · Thu Apr 24, 2014 4:59 pm

OSPFv3 for IPv6 still heavily broken and totally unusable if you have two or more ethernet between two routers. [Ticket#2013121266000031]

Clauu · Thu Apr 24, 2014 5:12 pm

rb2011 with latest 6.12, since yesterday i have high cpu usage, looked into tools-profile and 'dns' is eating 50% cpu.. wth is this?
From where i can restart/reset that service since i don't want to reboot the whole router just for that..?

Thu Apr 24, 2014 5:19 pm

Probably publicly opened dns service under attack. Search the forum first.

w0lt · Thu Apr 24, 2014 5:38 pm

On my home router (RB951G) v6.12 is crashing every few days, since installed.
I cannot recommend to use it in production.

I've found, at times, I needed to netinstall an upgrade after it appears unstable but not all devices.
Can't explain why, but it seemed to help.

With that in mind, I've been running v6.12 on a several RB2011's, RB951's, RB1100AHx2, without any major issues and no crashes.
I've also upgraded all the boot firmware to each devices current version.

Not sure if I should cross my fingers or not.

-tp

sash555 · Thu Apr 24, 2014 7:59 pm

There is still a bug in RouterOS 6.12 that was introduced in RouterOS 6.11 regarding bridge filter rules. I've found if you create bridge filter rules specifying an interface, the interface shown will go into hidden/minimized state in Winbox. The interface is still there and bridge filter is working but there is this hidden effect that is happening.

Create the bridge filter rule with bridge/interface specified. Double click on that same rule you had just created. There is a drop down arrow (menu field collapse/expand arrow) specifying the interface it will show as minimized, vs having that drop down arrow always maximized showing you what is applied on that rule.

+1

visalink · Fri Apr 25, 2014 3:30 am

There is still a bug in RouterOS 6.12 that was introduced in RouterOS 6.11 regarding bridge filter rules. I've found if you create bridge filter rules specifying an interface, the interface shown will go into hidden/minimized state in Winbox. The interface is still there and bridge filter is working but there is this hidden effect that is happening.

Create the bridge filter rule with bridge/interface specified. Double click on that same rule you had just created. There is a drop down arrow (menu field collapse/expand arrow) specifying the interface it will show as minimized, vs having that drop down arrow always maximized showing you what is applied on that rule.
+1

What Mikrotik said about it:

Hello,

thank you for writing to us. We will resolve this issue in future releases of
RouterOS. As this is only graphical bug it is of low priority.

Regards,
Janis Krumins

Ticket#2014032766000581

infused · Fri Apr 25, 2014 6:46 am

RB2011UAS issues after upgrade to v6.12:

- Dynamic routing protocols registered routes wrongly after first start. A simple reboot resolves this issue.
- Ports are flapping. There is a very short outage every few minutes. SNMP monitoring agents on servers sends tons of alerts. There is no RX/TX errors, but there are packet lost even on LAN.
- Inconsistent / bad auto negotiation. Router side see 1Gbps or 10Mbps Half, server runs on 100Mbps FD. After disabling/enabling ports change advertised rates, then restore to default (select all) it looks normally on both side. - (1Gbps FD)

I run this router too.

I don't see port flapping.
Also, I had auto negotiation issues as well. I replaced my network cables with better ones and they seem to negotiate now at 1gbps on all links.

kez · Fri Apr 25, 2014 5:42 pm

Hello guys,
can I use fast-path on VLANs on my mips based RBs with 6.12?
I guess there is no VLAN fast-path handler available(yet, I hope...).
Cheers

mtandrew · Fri Apr 25, 2014 9:04 pm

we lost complete vrrp config with 6.12 upgrade, it's simply gone.
also one router didn't boot at all, investigating.

so far crapiest upgrade ever.

rextended · Fri Apr 25, 2014 9:43 pm

Primary BUG: Webfig created script or schedule do not have ftp, winbox, api rights and are impossible to set that rights on Webfig

Secondary BUG: Winbox do not have the possibility to change ftp, winbox, api rights on script or schedule

VERSION AFFECTED: ALL VERSION OF ROUTEROS. Included last 6.13rc7

When one script are created on Winbox or on CLI, the default right applied are:
ftp,reboot,read,write,policy,test,winbox,password,sniff,sensitive,api

But when the script are created by webfig, the only right can be applied are:
reboot,read,write,policy,test,password,sniff,sensitive
MISSING ftp,winbox,api

Without ftp right some command like "/export file=filename;" are not doable on script / schedule created with WebFig.

Walkthrought: obviously using the CLI you can set the missing rights.

When I have time I open a Ticket for this.
But is clear what is the problem, without any other investigation.

thanga005 · Sat Apr 26, 2014 6:49 am

Hi Guys,
I have been using mikrotik products for the last 6 months, since the day i started working in ISP.
It was really great to work with mikrotik RouterOS, From the first day i learned to update the version and firmware and so,
But just yesterday i bought 2 Groove 52HPn for a PtP Link, i made the connection between them as usually and they were working fine, the problem is it has license level 3 and shows upgradable to V7.x, it came with the version 5.25ROS and in download page it shows only 5.26version and it gut upgraded to 5.26, but i cannot upgrade to 6.x, i tried dragging the lastest packages and also netinstall too but no use,

any idea why it shows only 5.26 as latest version?

and any solution to update to ver 6x?

Thank you,

acung · Sat Apr 26, 2014 7:13 am

BUG: Enable ipv6 on rb751u-2hnd, reboot, then suddenly wlan interface disabled and all wireless configuration reset to default itself.

rextended · Sat Apr 26, 2014 12:39 pm

BUG: Enable ipv6 on rb751u-2hnd, reboot, then suddenly wlan interface disabled and all wireless configuration reset to default itself.

You must be more specific.
RouterOS version? BIOS? How to replicate?

You reach to replicate the problem?

If you can not replicate problem, do not expect any fix.

tkgit · Sun Apr 27, 2014 3:21 am

BUG: Enable ipv6 on rb751u-2hnd, reboot, then suddenly wlan interface disabled and all wireless configuration reset to default itself.

do you use tunnel broker?
same case with me, process suddenly rise to 100%, then some interface (usually bridge,mesh,vlan) missing, disable IPv6 package solve this problem

acung · Mon Apr 28, 2014 6:36 am

BUG: Enable ipv6 on rb751u-2hnd, reboot, then suddenly wlan interface disabled and all wireless configuration reset to default itself.
do you use tunnel broker?
same case with me, process suddenly rise to 100%, then some interface (usually bridge,mesh,vlan) missing, disable IPv6 package solve this problem

Not doing anything yet, just enable ipv6 package then reboot, then wlan interface disable by itself and the config reset to default.
Solve it by enable the wlan interface and reconfigure it.

Mon Apr 28, 2014 10:18 am

Primary BUG: Webfig created script or schedule do not have ftp, winbox, api rights and are impossible to set that rights on Webfig.

Thanks, missing checkboxes noted.

MarcusW · Mon Apr 28, 2014 6:13 pm

When using the binary backup format; why is the MAC-addresses of the interfaces saved and used when restoring?!? (They are not changed from the default ones in the MT were the backup was taken.)

This was not the case with 5.x versions... which I think was the right behavior.

Mon Apr 28, 2014 6:16 pm

Mac addresses were always saved in backups, with v5.x, too.

MarcusW · Mon Apr 28, 2014 6:27 pm

Mac addresses were always saved in backups, with v5.x, too.

Well, yes they are saved but they where NOT restored in 5.x. Why has this changed?

Mon Apr 28, 2014 6:30 pm

Were saved and restored always.

Chupaka · Mon Apr 28, 2014 7:18 pm

i cannot upgrade to 6.x, i tried dragging the lastest packages and also netinstall too but no use,

any idea why it shows only 5.26 as latest version?

and any solution to update to ver 6x?

the reason is in Log after reboot

5.26 is the latest in version checking because you have to upgrade to v6 manually

lunchboxrts · Tue Apr 29, 2014 2:34 am

CRS125-24G-1S

Massive port flapping on CRS125 on latest 6.12 and 6.13rc7. Email sent with supout to support.

jan/02/1970 00:00:15 interface,info ether2 link up (speed 100M, full duplex)
jan/02/1970 00:00:16 interface,info ether1 link up (speed 10M, half duplex)
jan/02/1970 00:00:19 interface,info ether2 link down
jan/02/1970 00:00:20 interface,info ether1 link down
jan/02/1970 00:00:24 interface,info ether2 link up (speed 100M, full duplex)
jan/02/1970 00:00:25 interface,info ether1 link up (speed 10M, half duplex)
jan/02/1970 00:00:29 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:00:33 interface,info ether8 link up (speed 100M, full duplex)
jan/02/1970 00:00:34 interface,info ether4 link down
jan/02/1970 00:00:37 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:00:38 interface,info ether4 link down
jan/02/1970 00:00:41 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:00:44 interface,info ether4 link down
jan/02/1970 00:00:45 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:00:45 interface,info ether8 link down
jan/02/1970 00:00:46 interface,info ether8 link up (speed 100M, full duplex)
jan/02/1970 00:00:47 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:00:47 interface,info ether8 link down
jan/02/1970 00:00:49 interface,info ether8 link up (speed 100M, full duplex)
jan/02/1970 00:00:52 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:00:53 interface,info ether10 link down
jan/02/1970 00:00:56 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:00:57 interface,info ether10 link down
jan/02/1970 00:00:57 interface,info ether12 link up (speed 100M, full duplex)
jan/02/1970 00:00:59 interface,info ether4 link down
jan/02/1970 00:00:59 interface,info ether5 link down
jan/02/1970 00:01:00 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:01:01 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:01:01 interface,info ether10 link down
jan/02/1970 00:01:02 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:01:03 interface,info ether5 link down
jan/02/1970 00:01:04 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:01:07 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:01:10 interface,info ether5 link down
jan/02/1970 00:01:13 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:01:46 interface,info ether5 link down
jan/02/1970 00:01:49 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:01:59 interface,info ether5 link down
jan/02/1970 00:02:02 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:03 interface,info ether5 link down
jan/02/1970 00:02:06 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:26 interface,info ether5 link down
jan/02/1970 00:02:28 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:34 interface,info ether5 link down
jan/02/1970 00:02:39 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:40 interface,info ether5 link down
jan/02/1970 00:02:43 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:44 interface,info ether5 link down
jan/02/1970 00:02:50 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:06:05 interface,info ether5 link down
jan/02/1970 00:06:08 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:10:45 interface,info ether5 link down
jan/02/1970 00:10:48 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:17:34 interface,info ether5 link down
jan/02/1970 00:17:37 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:19:35 interface,info ether10 link down
jan/02/1970 00:19:37 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:19:45 interface,info ether10 link down
jan/02/1970 00:19:47 interface,info ether10 link up (speed 1G, full duplex)

MarcusW · Tue Apr 29, 2014 10:16 am

Were saved and restored always.

Listen to me! They where NOT saved and restored always.

I have now taken a backup on an empty router with default MAC. Restoring this backup on a router with version 5.21 does nothing with the MAC-addresses in that router. Restoring this backup on a router with version 6.12 does change the MAC-addresses to the ones in the backup.

My question now is, once again; Why has this changed? Shouldn't the MAC:s be transfered ONLY when they where changed in the router were the backup was created?

Tue Apr 29, 2014 10:48 am

Sorry marcus, apparently those routers are different in some way, because I also can verify that they are saved and restored in v5 also.

This is one of the reasons to use "export" file instead of backup

MarcusW · Tue Apr 29, 2014 11:05 am

Sorry marcus, apparently those routers are different in some way, because I also can verify that they are saved and restored in v5 also.

This is one of the reasons to use "export" file instead of backup

Okay, but the tests I have done is on the same router, going back and forth with the versions and restore configuration from the same backup and for me I always get the MAC:s when using 6.12 and never with 5.21. We have also produced a lot of routers with 5.21 this way...

We don't use export because we haven't, amoung other things, found a way to also include users in the export file.. (In production it's also better it they don't need to go into the console...) We will try the export function again and then add users and so on to that file.

chrone · Tue Apr 29, 2014 3:57 pm

BUG: Tx and Rx Flow Control settings always get reset on reboot on RB450 ROS v6.12 with firmware v3.10.

I tested on 2 RB450s to enable the Tx and Rx Flow Control in Interface > Ethernet with no luck sticking the setting on reboot.

acung · Tue Apr 29, 2014 4:30 pm

CRS125-24G-1S

Massive port flapping on CRS125 on latest 6.12 and 6.13rc7. Email sent with supout to support.

jan/02/1970 00:00:15 interface,info ether2 link up (speed 100M, full duplex)
jan/02/1970 00:00:16 interface,info ether1 link up (speed 10M, half duplex)
jan/02/1970 00:00:19 interface,info ether2 link down
jan/02/1970 00:00:20 interface,info ether1 link down
jan/02/1970 00:00:24 interface,info ether2 link up (speed 100M, full duplex)
jan/02/1970 00:00:25 interface,info ether1 link up (speed 10M, half duplex)
jan/02/1970 00:00:29 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:00:33 interface,info ether8 link up (speed 100M, full duplex)
jan/02/1970 00:00:34 interface,info ether4 link down
jan/02/1970 00:00:37 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:00:38 interface,info ether4 link down
jan/02/1970 00:00:41 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:00:44 interface,info ether4 link down
jan/02/1970 00:00:45 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:00:45 interface,info ether8 link down
jan/02/1970 00:00:46 interface,info ether8 link up (speed 100M, full duplex)
jan/02/1970 00:00:47 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:00:47 interface,info ether8 link down
jan/02/1970 00:00:49 interface,info ether8 link up (speed 100M, full duplex)
jan/02/1970 00:00:52 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:00:53 interface,info ether10 link down
jan/02/1970 00:00:56 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:00:57 interface,info ether10 link down
jan/02/1970 00:00:57 interface,info ether12 link up (speed 100M, full duplex)
jan/02/1970 00:00:59 interface,info ether4 link down
jan/02/1970 00:00:59 interface,info ether5 link down
jan/02/1970 00:01:00 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:01:01 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:01:01 interface,info ether10 link down
jan/02/1970 00:01:02 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:01:03 interface,info ether5 link down
jan/02/1970 00:01:04 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:01:07 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:01:10 interface,info ether5 link down
jan/02/1970 00:01:13 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:01:46 interface,info ether5 link down
jan/02/1970 00:01:49 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:01:59 interface,info ether5 link down
jan/02/1970 00:02:02 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:03 interface,info ether5 link down
jan/02/1970 00:02:06 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:26 interface,info ether5 link down
jan/02/1970 00:02:28 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:34 interface,info ether5 link down
jan/02/1970 00:02:39 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:40 interface,info ether5 link down
jan/02/1970 00:02:43 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:44 interface,info ether5 link down
jan/02/1970 00:02:50 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:06:05 interface,info ether5 link down
jan/02/1970 00:06:08 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:10:45 interface,info ether5 link down
jan/02/1970 00:10:48 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:17:34 interface,info ether5 link down
jan/02/1970 00:17:37 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:19:35 interface,info ether10 link down
jan/02/1970 00:19:37 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:19:45 interface,info ether10 link down
jan/02/1970 00:19:47 interface,info ether10 link up (speed 1G, full duplex)

Just checked our two CRS125-24G-1S, with ros 6.12, have the same issue

xrayd · Tue Apr 29, 2014 8:58 pm

Hello,
this VLAN Bug known?

domainlider · Wed Apr 30, 2014 6:36 am

I'm not found in 6.12 /certificate sign-ca . How do I get sign-ca ?

domainlider · Wed Apr 30, 2014 6:40 am

Im not found /certificate sign-ca . How do I get sign-ca ?

armandfumal · Wed Apr 30, 2014 8:33 am

PROBLEM REPORT

Hi all,

we are facing to CPU usage problem, all core are used to 50% at the same time every 10 sec.

We found that is DUDE using snmp query that causing that. stopping DUDE to use SNMP resolve the problem but I can't monitor cpu (graphing in dude) without SNMP.
And in profiling the cpu usage is under unclassified.
RouterOS 6.12
CCR1036

On 1100Ahx2 with same config and 6.12, no cpu issue. this behavior is on CCR plateform.

Thanks

Armand

domainlider · Wed Apr 30, 2014 10:47 am

Hello,
this VLAN Bug known?

I encountered a similar problem. I'm helped :
1. Backup configuration
2. Reset to defaults
3. Restore configuration

xrayd · Wed Apr 30, 2014 11:52 am

Hello,
this VLAN Bug known?
I encountered a similar problem. I'm helped :
1. Backup configuration
2. Reset to defaults
3. Restore configuration

You use mikrotik x86?

domainlider · Wed Apr 30, 2014 12:24 pm

Hello,
this VLAN Bug known?
I encountered a similar problem. I'm helped :
1. Backup configuration
2. Reset to defaults
3. Restore configuration

You use mikrotik x86?

I'm use 1100AHx2 . After upgrade (fw 2.6 => 3.10, os 6.10 => 6.12) i'm detect several problems
1. Several ip adress link <unknown> interface
2. One ipip tunnel down after connect pptp client to router
3. /int ipip shows one pptp client - Bug?

After full reset configuration and restore - router worked!

estdata · Wed Apr 30, 2014 7:17 pm

I recently went to 6.12 apart and I started to mess with the router, and the lag, both in the internet and iptv. I went back to 6.10, and say that I am happy with that. No longer going anywhere no loudspeaker upgrade

OrCAD · Wed Apr 30, 2014 9:01 pm

I've bug with eoip interface disappear with some pppoe registrations. Is impossible to add new eoip tunnel with pppoe server on it.

When release 6.13 ?
or where I can download RC?

thans in advance.
IM

rpingar · Thu May 01, 2014 12:14 am

I've bug with eoip interface disappear with some pppoe registrations. Is impossible to add new eoip tunnel with pppoe server on it.

When release 6.13 ?
or where I can download RC?

thans in advance.
IM

I reported the exact same bug on ticket: #2014041966000282
Seems it is related to some internal interfaces index bug.

They told me to be fixed in v6.13

regards
Ros

xrayd · Thu May 01, 2014 1:21 am

Hello,
this VLAN Bug known?
I encountered a similar problem. I'm helped :
1. Backup configuration
2. Reset to defaults
3. Restore configuration

You use mikrotik x86?

I'm use 1100AHx2 . After upgrade (fw 2.6 => 3.10, os 6.10 => 6.12) i'm detect several problems
1. Several ip adress link <unknown> interface
2. One ipip tunnel down after connect pptp client to router
3. /int ipip shows one pptp client - Bug?

After full reset configuration and restore - router worked!

can someone confirm this bug on x86 ??

robertik · Thu May 01, 2014 12:14 pm

Hi,

I have the same issue - I have created vlan on 6.12 and after some time it was missing.
Reported to support ticket number: 2014050166000161

CCR1016-12G
Strange vlan issue.
Added vlan 1286 on ether12 via winbox.
Close winbox, reopen, vlan now missing.
Under vlans tab in interfaces setup, there is a ppp-XXXX dynamic user listed??
Seems like the vlan interface name / index however mikrotik does it gets corrupted.

Resetted board to defaults, restored config from rsc export. Same result.
Downgraded to 6.7 and all seems well again.

Could not create supout.rif, as this unit was in production at the time and clients was going crazy.
Will try and recreate again and log ticket.

tkgit · Fri May 02, 2014 5:05 am

can mikrotik engineer change linux kernel in ROS v6 to other longterm version or stable version?

TechKiwi · Fri May 02, 2014 8:13 am

As a reference I have had issues with 6.12 and using the SSTP VPN.

After upgrading clients can connect but it will not pass VPN traffic (No changes to the configuration at all).

I have since rolled back to 6.10 and it is working again perfectly.

If anyone wants me to send logs feel free to send a message.

DjM · Fri May 02, 2014 8:51 am

As a reference I have had issues with 6.12 and using the SSTP VPN.

After upgrading clients can connect but it will not pass VPN traffic (No changes to the configuration at all).

I have since rolled back to 6.10 and it is working again perfectly.

If anyone wants me to send logs feel free to send a message.

Make support file from VPN server and 2 clients and send it to support@mikrotik.com . I had similar issues with SSTP VPN so I also have to rollback to older version.

kellogs · Fri May 02, 2014 3:01 pm

do you guys have packet loss issues on 6.12?

iqt · Fri May 02, 2014 3:10 pm

I'm not found in 6.12 /certificate sign-ca . How do I get sign-ca ?

I had the same question and got no answer. http://forum.mikrotik.com/viewtopic.php ... 00#p422356

I guess you have to open a ticket.

Meanwhile use openssh to generate a self-signed CA or go back to ROS 6.11

Fri May 02, 2014 3:20 pm

Please read description of "sign" command
http://wiki.mikrotik.com/wiki/Manual:Sy ... neral_Menu

iqt · Fri May 02, 2014 4:12 pm

Please read description of "sign" command
http://wiki.mikrotik.com/wiki/Manual:Sy ... neral_Menu

Thank you for updating the documentation.

CA certificates are created if key-usage=key-cert-sign set in the template.

If this is the new procedure, may I ask to adapt Winbox for new certificates please:
a) "Sign CA": Button is no longer needed
b) "Sign": CA-field should be optional (to create self-signed CA)

theprism · Sat May 03, 2014 6:10 pm

It looks like wireless "tx-power-mode=card-rates" is not supported anymore... however, the command still exists.
Does anyone know why?

P.S. Not sure if it's from v6.12 or before, since I upgraded from v6.0...

skibi82 · Sun May 04, 2014 11:41 am

Question I need to put on windows 8.1 ROS.
Unfortunately can not see network interfaces with Hyper-V.
Is ROS in general 6.x adapters work with Hyper-V?

marizo · Sun May 04, 2014 9:40 pm

Yesterday I upgraded my home AP RB411AH to ROS 6.12 (from 5.26) and now script is broken.
I'm new in MT so I don't know - it's 6.12 or script fault. It sends me IP adress of Ethernet interface.

global ipadd;
:global ipaddext;
:local thisip [/ip address get [find interface=ether1] address];
/tool fetch url="http://myip.dnsomatic.com/" mode=http dst-path=mypublicip.txt
:local ipext [file get mypublicip.txt contents ]
put $ipaddext
:if ($ipadd != $thisip || $ipaddext != $ipext) do={
/tool e-mail send to=xxx@yyy.lv subject="$[/system identity get name] $[/system clock get time] $[/system clock get date] IP change"  body="New local IP $thisip New public IP $ipext" tls=yes;
   set ipadd $thisip;
   set ipaddext $ipext;
}

So far i understand - script can't fetch url or make mypublicip.txt.

Update:
Made some search in Google and repaired script:

:global oldlocalIP;
:global oldglobalIP;

:local localIP  [/ip address get [find interface="ether1"] address];
:local strDate [/system clock get date]
:local strTime [/system clock get time]
:local strSystemName [/system identity get name]

/tool fetch url="http://myip.dnsomatic.com/" mode=http dst-path=mypublicip.txt
:local globalIP [file get mypublicip.txt contents ]


:if ($localIP != $oldlocalIP || $globalIP != $oldglobalIP) do={
   /tool e-mail send to=xxx@yyy.lv subject="$strSystemName IP adreses maina $strDate $strTime" body="New ext IP: $globalIP New local IP: $localIP"
   set oldlocalIP $localIP;
   set oldglobalIP $globalIP;
}

saaremaa · Mon May 05, 2014 1:25 pm

can someone confirm this bug on x86 ??

this error we see on the bridge and vlan interfaces authorization PPPoE. RB 1000Ah2 6.13rc9 Apr/29/2014 08:02:26
and when SXT (sextant) is connected via a base station wds RB433L 6.12 Apr/14/2014 09:27:45 wds breaks vlan interface.

odge · Mon May 05, 2014 10:09 pm

Hi,

I can see the same here for 3 sstp links, always a reconnect after 2 minutes saying "terminating... - conn timeout" in the logs of the client.

A link from Windows to the router using sstp seems not to be reset after 2 minutes.

SSTP driving me crazy... why is it so unreliable. We have have x86 concentrator sitting in a datacenter, and about 50 sites connecting back to it, for sending netflow data, and for weeks some sstp clients work, then one day when they reconnect, they timeout after 2 minutes over and over again... and some other site starts working again normally.

leonset · Tue May 06, 2014 10:01 am

Question I need to put on windows 8.1 ROS.
Unfortunately can not see network interfaces with Hyper-V.
Is ROS in general 6.x adapters work with Hyper-V?

AFAIK, ROS is not and will not be supported under Hyper-V. You may have better luck with Virtualbox or VMWare, but I have no personal experience with any of them wiht ROS.

bysard · Tue May 06, 2014 10:03 am

Hi,

PPTP also seems somehow bugged. I have upgraded 3x RB751U-2hnd from 5.26 to 6.12 in a lab enviroment. All three routers connect to the main x86 VMware virtualized RoS 5.26 router via PPTP VPN. I can also ping the routers from VPN endpoint without any lost packets. The connection seems up, but RIP doesn't exchange routes. If I try to connect via winbox to a VPN IP of the affected routers, I get DC in 5 seconds and nothing but router name loads. I have no problem accessing routers via LAN, but ove PPTP VPN I cannot. Everything was working without a problem with 5.26. Before I had winbox for 6.12 on RB751 DLL's loaded into memory I couldn't even get connected as the connection always hung at 189,2 KB received. When I connected through LAN I got the DLL, can manage router but as soon as I try to connect via VPN IP I get DC.

wolfeyes · Tue May 06, 2014 11:45 am

CRS125-24G-1S

Massive port flapping on CRS125 on latest 6.12 and 6.13rc7. Email sent with supout to support.

jan/02/1970 00:00:15 interface,info ether2 link up (speed 100M, full duplex)
jan/02/1970 00:00:16 interface,info ether1 link up (speed 10M, half duplex)
jan/02/1970 00:00:19 interface,info ether2 link down
jan/02/1970 00:00:20 interface,info ether1 link down
jan/02/1970 00:00:24 interface,info ether2 link up (speed 100M, full duplex)
jan/02/1970 00:00:25 interface,info ether1 link up (speed 10M, half duplex)
jan/02/1970 00:00:29 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:00:33 interface,info ether8 link up (speed 100M, full duplex)
jan/02/1970 00:00:34 interface,info ether4 link down
jan/02/1970 00:00:37 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:00:38 interface,info ether4 link down
jan/02/1970 00:00:41 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:00:44 interface,info ether4 link down
jan/02/1970 00:00:45 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:00:45 interface,info ether8 link down
jan/02/1970 00:00:46 interface,info ether8 link up (speed 100M, full duplex)
jan/02/1970 00:00:47 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:00:47 interface,info ether8 link down
jan/02/1970 00:00:49 interface,info ether8 link up (speed 100M, full duplex)
jan/02/1970 00:00:52 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:00:53 interface,info ether10 link down
jan/02/1970 00:00:56 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:00:57 interface,info ether10 link down
jan/02/1970 00:00:57 interface,info ether12 link up (speed 100M, full duplex)
jan/02/1970 00:00:59 interface,info ether4 link down
jan/02/1970 00:00:59 interface,info ether5 link down
jan/02/1970 00:01:00 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:01:01 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:01:01 interface,info ether10 link down
jan/02/1970 00:01:02 interface,info ether4 link up (speed 1G, full duplex)
jan/02/1970 00:01:03 interface,info ether5 link down
jan/02/1970 00:01:04 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:01:07 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:01:10 interface,info ether5 link down
jan/02/1970 00:01:13 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:01:46 interface,info ether5 link down
jan/02/1970 00:01:49 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:01:59 interface,info ether5 link down
jan/02/1970 00:02:02 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:03 interface,info ether5 link down
jan/02/1970 00:02:06 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:26 interface,info ether5 link down
jan/02/1970 00:02:28 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:34 interface,info ether5 link down
jan/02/1970 00:02:39 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:40 interface,info ether5 link down
jan/02/1970 00:02:43 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:02:44 interface,info ether5 link down
jan/02/1970 00:02:50 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:06:05 interface,info ether5 link down
jan/02/1970 00:06:08 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:10:45 interface,info ether5 link down
jan/02/1970 00:10:48 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:17:34 interface,info ether5 link down
jan/02/1970 00:17:37 interface,info ether5 link up (speed 1G, full duplex)
jan/02/1970 00:19:35 interface,info ether10 link down
jan/02/1970 00:19:37 interface,info ether10 link up (speed 1G, full duplex)
jan/02/1970 00:19:45 interface,info ether10 link down
jan/02/1970 00:19:47 interface,info ether10 link up (speed 1G, full duplex)
Just checked our two CRS125-24G-1S, with ros 6.12, have the same issue

Same problem stands also for me and for the very same device.

AlexS · Wed May 07, 2014 2:27 am

Did an upgrade of 2 ccr1036 to 6.12 from 6.10

went well, i had held of because of other reports.

All seems well.

I have lost my netflow info... strange still works on my x86 VM's not on my on ccr....

acung · Wed May 07, 2014 12:28 pm

CRS125-24G-1S

Same problem stands also for me and for the very same device.

Mikrotik support told me to ground the switch, did that and the port still flapping.

Neilson · Wed May 07, 2014 12:44 pm

Did an upgrade of 2 ccr1036 to 6.12 from 6.10

went well, i had held of because of other reports.

All seems well.

I have lost my netflow info... strange still works on my x86 VM's not on my on ccr....

Have you tried going into netflow and disabling the netflow then click ok.

Then go back in and turn it back on and see if you get your netflow data back.

I found my Netflow data playing up but it has seemed to come back after I tried this.

Regards
Alexander