hello

1 PPTP VPN server installed .

ip information

IP pools: 192.168.60.1-192.168.60.254

vpn server is located at 1 DHCP server installed MikroTik

IP pools: 90.0.0.1/24



question in the following way .

mikrotikd found photos of 2

MikroTik which I connect to the VPN server .


Figure 2 also found that mikrotik

I did not want to throw ping 90.0.0.1 .

I need to get what rules ?

[ admin @ SAKARYA ] > ping 90.0.0.1
HOST SIZE TTL TIME STATUS
90.0.0.1 timeout
90.0.0.1 timeout
90.0.0.1 timeout
90.0.0.1 timeout
90.0.0.1 timeout
90.0.0.1 timeout
    you received = 6 = 0 packet- loss = 100 %

Use trace route to see where it is attempting to send the traffic. Does the VPN client device have a route entry telling to send traffic to the target address via the VPN connection?

hello

My purpose is "admin@SAKARYA"

I want to ping 90.0.0.1 from the device.

how to vpn server mikroik a rule that I need to take?

admin@mikrotik VPN SERVER

You need to add a route to the PPTP client telling it send the traffic via the PPTP client interface. You also need to allow that traffic in the forward filters on the VPN server. Lastly, the target device needs to have a path back to the PPTP client - either a default route via the VPN server or an explicit route.

could you please

Please write me what commands diefthinei

Give examples
  please

thnks

You need to add a route to the PPTP client telling it send the traffic via the PPTP client interface. You also need to allow that traffic in the forward filters on the VPN server. Lastly, the target device needs to have a path back to the PPTP client - either a default route via the VPN server or an explicit route.

I e-mailed you

Please check

I could not find a solution?

......

Add the following on the router which has the PPTP client:

ros code

/ip route
add disabled=no distance=1 dst-address=90.0.0.0/24 gateway="deneme yeni vpn"

thank you very much...