I have an operational 751G 2HnD unit with some setting and I've purchased a new 951G 2HnD unit to replace the old one as I need more processing power. Both units are running the latest 6.15 SW
I'm trying to achieve a very simple thing -- move the existing configuration from the 751 to the 951 but I encountered a very odd problem:
I've exported the exisintg configuration out of the 751 by doing "/ export file=running-751"
I've exported the default configuration out of the 951 by doing "/ export file=running-951"
I went through the 751's script and modified all the config entries that were referring to the 751's MAC addresses to mach the same entries from the 951's script (/interface bridge)
I uploaded the modified 751's script to the 951 and issued a /system reset-configuration run-after-reset=running-751.rsc
The 951 seemingly executed the script but became an unmanageable brick -- no DHCP, no IP addesses, WiFi operational with proper password but no IP/DHCP over wifi either.
Can anyone point me out to what's the error or how to debug the config scpript?
Here's the config I'm trying to apply:
Regards,# jan/02/1970 00:02:06 by RouterOS 6.15
# software id = KKUH-JK3W
#
/interface bridge
add admin-mac=D4:CA:6D:F2:D8:9F auto-mac=no l2mtu=1598 name=bridge-local
/interface wireless
set [ find default-name=wlan1 ] antenna-mode=rxa-txb band=2ghz-b/g/n channel-width=\
20/40mhz-ht-above country=russia disabled=no distance=indoors frequency=2422 \
l2mtu=2290 mode=ap-bridge ssid=8-2-2
/interface ethernet
set [ find default-name=ether1 ] name=ether1-Beeline
set [ find default-name=ether2 ] name=ether2-local
set [ find default-name=ether3 ] master-port=ether2-local name=\
ether3-slave-local
set [ find default-name=ether4 ] master-port=ether2-local name=\
ether4-slave-local
set [ find default-name=ether5 ] master-port=ether2-local name=\
ether5-slave-local
/ip neighbor discovery
set ether1-Beeline discover=no
/interface vlan
add interface=ether1-Beeline l2mtu=1594 name=external-vlan200 vlan-id=200
/interface ethernet switch port
set 0 default-vlan-id=200 vlan-header=always-strip vlan-mode=secure
set 1 default-vlan-id=100 vlan-header=always-strip vlan-mode=secure
set 2 default-vlan-id=100 vlan-header=always-strip vlan-mode=secure
set 3 default-vlan-id=100 vlan-header=always-strip vlan-mode=secure
set 4 default-vlan-id=100 vlan-mode=secure
set 5 default-vlan-id=100 vlan-mode=secure
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys \
wpa-pre-shared-key=password wpa2-pre-shared-key=password
/ip hotspot user profile
set [ find default=yes ] idle-timeout=none keepalive-timeout=2m \
mac-cookie-timeout=3d
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254
add name=black-LAN ranges=10.100.50.10-10.100.50.250
add name="L2TP clients" ranges=10.255.255.100-10.255.255.254
/ip dhcp-server
add address-pool=black-LAN disabled=no interface=bridge-local name=default
/interface l2tp-client
add add-default-route=yes allow=chap,mschap1,mschap2 connect-to=\
tp.internet.beeline.ru default-route-distance=2 dial-on-demand=no \
disabled=no keepalive-timeout=60 max-mru=1450 max-mtu=1450 mrru=disabled \
name=l2tp-Beeline password=password profile=default user=beeline_user
/system logging action
set 3 remote=10.100.50.186 syslog-facility=local7
/interface bridge port
add bridge=bridge-local interface=wlan1
add bridge=bridge-local interface=ether2-local
add interface=ether1-Beeline
add interface=ether5-slave-local
/interface ethernet switch vlan
add independent-learning=no ports="ether2-local,ether3-slave-local,ether4-slav\
e-local,ether5-slave-local,switch1-cpu" switch=switch1 vlan-id=100
add independent-learning=no ports=\
ether1-Beeline,ether5-slave-local,switch1-cpu switch=switch1 vlan-id=200
/ip address
add address=10.100.50.1/24 comment="default configuration" interface=\
bridge-local network=10.100.50.0
/ip dhcp-client
add comment="default configuration" default-route-distance=3 dhcp-options=\
hostname,clientid disabled=no interface=external-vlan200
/ip dhcp-server lease
add address=10.100.50.186 mac-address=00:08:9B:CA:32:E6
add address=10.100.50.86 client-id=1:0:6:78:d:3f:6b mac-address=\
00:06:78:0D:3F:6B server=default
add address=10.100.50.34 client-id=1:68:b5:99:5344 mac-address=\
68:B5:99:53:CD:44 server=default
/ip dhcp-server network
add address=10.100.50.0/24 dns-server=10.100.50.1 gateway=10.100.50.1 \
netmask=24
add address=192.168.88.0/24 comment="default configuration" dns-server=\
192.168.88.1 gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=10.100.50.1 name=router
/ip firewall filter
add chain=input comment="default configuration" protocol=icmp
add chain=input comment="default configuration" connection-state=established
add chain=input comment="default configuration" connection-state=related
add chain=input disabled=yes dst-port=500 in-interface=l2tp-Beeline protocol=\
udp
add chain=input comment="L2TP control connection" disabled=yes dst-port=1723 \
in-interface=l2tp-Beeline protocol=tcp
add action=drop chain=input comment="default configuration" in-interface=\
ether1-Beeline
add action=drop chain=input in-interface=l2tp-Beeline
add chain=forward comment="default configuration" connection-state=\
established
add chain=forward comment="default configuration" connection-state=related
add action=drop chain=forward comment="default configuration" \
connection-state=invalid
/ip firewall nat
add action=masquerade chain=srcnat out-interface=l2tp-Beeline
add action=masquerade chain=srcnat comment="default configuration" \
out-interface=external-vlan200
/ip route
add disabled=yes distance=1 gateway=l2tp-Beeline
add comment="Static to Beeline internal network" distance=1 dst-address=\
10.0.0.0/8 gateway=10.73.80.1
add comment="Static to L2TP routers 78.107.1.0/24" distance=1 dst-address=\
78.107.1.0/24 gateway=10.73.80.1
add comment="Static to L2TP routers 85.21.0.0/24" distance=1 dst-address=\
85.21.0.0/24 gateway=10.73.80.1
add comment="Static to Beeline DNS #2" distance=1 dst-address=85.21.192.3/32 \
gateway=10.73.80.1
add comment="Static to Beeline DNS#1" distance=1 dst-address=213.234.192.8/32 \
gateway=10.73.80.1
/ip upnp
set allow-disable-external-interface=no
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www address=10.100.50.0/24
set ssh address=10.100.50.0/24
set api disabled=yes
set winbox disabled=yes
set api-ssl disabled=yes
/system clock
set time-zone-name=Europe/Moscow
/system leds
set 0 interface=wlan1
/system logging
set 3 action=remote
add action=echo topics=critical
add action=remote topics=error
add action=remote topics=info
add action=remote topics=warning
add action=remote topics=ipsec,l2tp,ovpn,dhcp,wireless,firewall,account
add action=remote topics=wireless,debug
/system leds
set 0 interface=wlan1
/system ntp client
set enabled=yes
/tool mac-server
set [ find default=yes ] disabled=yes
add interface=ether2-master-local
add interface=ether3-slave-local
add interface=ether4-slave-local
add interface=ether5-slave-local
add interface=wlan1
add interface=bridge-local
/tool mac-server mac-winbox
set [ find default=yes ] disabled=yes
add interface=ether2-master-local
add interface=ether3-slave-local
add interface=ether4-slave-local
add interface=ether5-slave-local
add interface=wlan1
add interface=bridge-local
44 mac-address=\Alex
