We have released a new Winbox version with many long requested features. Currently the new Winbox is still in Beta, but it works very well, and can be used alongside the old Winbox, without disturbing the operation of the router, or the old Winbox. You can download it on the mikrotik.com download page

Some of the highlights in Winbox 3:

http://download2.mikrotik.com/routeros/ ... winbox.exe

• Group saved routers and keep big lists of them
• Sort by IP address, MAC, version etc.
• Filter and search in Saved or Neighbors
• Ability to keep Loader open when connecting
• Winbox can now self-upgrade
• If connection is lost, it will offer to reconnect later
• Log can be sorted, and now has columns

I would like to report when using the new Winbox beta in WINE on Ubuntu (12.04 LTS currently), it successfully loads my previous saved routers, but trying to add a group to the router makes it disappear from the list, cant find it with filters or anything.

When closing and re-opening, the missing routers are back, but without a group.

Would be great to have a dedicated Linux client, but thats a discussion for another day I fear

I would like to report when using the new Winbox beta in WINE on Ubuntu (12.04 LTS currently), it successfully loads my previous saved routers, but trying to add a group to the router makes it disappear from the list, cant find it with filters or anything.

When closing and re-opening, the missing routers are back, but without a group.

Would be great to have a dedicated Linux client, but thats a discussion for another day I fear

Wine in MacOS has no such issue, I can add devices in groups, and search by them. Maybe Wine version issue?

Maybe. I'm due to upgrade to 14.04 LTS soon and will be doing fresh installs of a lot of things, will report if the issue persists.

I found that if I hit SAVE twice, it still dissapears items from the menu, but after closing and returning it persists groups etc. So it's workable.

One feature request for next beta: In 'Neighbors' I see it groups routers by MAC address with big inline headings. I think it would be good to be able to do the same with the GROUP setting in the Managed tab so instead of:
it could be:
if that makes sense.

Just an idea to have bigger visible grouping.

yeahhh its really amazing
thanks Mikrotik

Thanks for new version!
+ for reconnect option after connection lost.

My thoughts after few minute test- some visual improvements would be excellent:
tab windows opens in inconvenient default sizes and positions, some parts not visible (my PC resolution 1280x768)(example attached)
and windows taskbar icon is blurry (v2.2.18- clear)

[Ticket#2014071866000868]

7 issues / missing features in Winbox3 beta2.

Normis, if you have time, please have a look at it.

[Ticket#2014071866000868]

7 issues / missing features in Winbox3 beta2.

Normis, if you have time, please have a look at it.

strange but my log does autoscroll once you have scrolled to the bottom ...

Export function should export the group that is selected. This way I could export all routers for a customer and send it over.

Seems to export everything as it is now.

[Ticket#2014071866000868]

7 issues / missing features in Winbox3 beta2.

Normis, if you have time, please have a look at it.

strange but my log does autoscroll once you have scrolled to the bottom ...

Here is how I'm trying it:

Open log Window > Scroll to the bottom [due to starting scroll being on top]
Open New Terminal > log already doesnt auto-scroll
Type ":log warn test" into terminal > log still doesnt auto-scroll

[Ticket#2014071866000868]

7 issues / missing features in Winbox3 beta2.

Normis, if you have time, please have a look at it.

strange but my log does autoscroll once you have scrolled to the bottom ...

Here is how I'm trying it:

Open log Window > Scroll to the bottom [due to starting scroll being on top]
Open New Terminal > log already doesnt auto-scroll
Type ":log warn test" into terminal > log still doesnt auto-scroll

tried the same steps, it does scroll down automatically when new command pasted in terminal. must be some specific thing in windows or else. I have MacOS with Wine and Winbox 3 beta 2

tried the same steps, it does scroll down automatically when new command pasted in terminal. must be some specific thing in windows or else. I have MacOS with Wine and Winbox 3 beta 2

What is your sorting order in Log? Newest on top or newest on bottom?
My newest are on bottom, and I have to manually scrolled all the way down every time.

I have tested with:
Windows 7 SP1 x64, Winbox 3 beta2
Kali Linux x64, x86 Wine, Winbox 3 beta2

Both show the issue.

When I select "Profile", the program crashes.....

The same - Tools/Profile simply closes winbox without any warning!

The window position can not be remembered between sessions. Or at least I can't make it work. I am using the Exit button, not 'X'.
And the autoscrolling that I've mentioned in another topic is not working properly. Yes it does work when you scroll down, but only if the buffer is full with lines otherwise it does not.

The window position can not be remembered between sessions. Or at least I can't make it work. I am using the Exit button, not 'X'.
And the autoscrolling that I've mentioned in another topic is not working properly. Yes it does work when you scroll down, but only if the buffer is full with lines otherwise it does not.

Nice tip! Now we can fix the bug, thanks for info about the buffer

Was suprised seeing this new Winbox on the Website and i played a bit around with it, my discovery so far..

Winbox not saving sessions, after moving around several windows to my liking and restarting winbox, everything is gone, i loved that feature on the old Winbox, the checkbox "Load previous Session" was enabled.

Editing entrys is little bit buggy, after editing an entry and pressing save, sometimes some or all other entrys disappear, pressing save again sometimes help, restarting Winbox bring back all entrys.

In my work group on deban 7.6 (wine-1.4.1), but sometimes Winbox can close in August alone.

it cannot scan the device?
old version can.

When I select "Profile", the program crashes.....

Same issue here on Windows + MacOS with Crossover/Wine.

So far found cons:
- Tools - profile closes the window.
- Windows layout is not stored - openning with "load previous session" does not work (sure I pressed "exit" button before).
- The starting on top of the log should be changed in order to behave in the same manner as version 2.
- Trying the version 3.0b2 I lost the saved sessions - layouts that till now worked with version 2.
- Windows cannot be shrinked - lowered the height (e.g. "interfaces" window cannot be shrinked to display less lines).

And pros:
- Opening in new window is cool!
- Reconnect window is cool, but "more..." button is misleading, I expected more options but I lost possibility to reconnect... Does it have timeout when the reconnect window automatically closes?
- And reconnect works! Wow!

Looks promising, go on!

And please, do not forget the Dude .

I would love the possibility to create a 'master default' setting ..where,e.g., relevant (custom) firewall columns are already and ever showed!!
..and many others possible usefull customizations on many other forms.. simply with a better/custom default (as I'm used to with putty ..for example)

current default for firewall columns is the most evident cause of my insomnia

I would like to report similar to Tools->Profile, opening quickset then using [x] on the quickset internal window is causing my winbox to crash.

I would love the possibility to create a 'master default' setting ..where,e.g., relevant (custom) firewall columns are already and ever showed!!

This +1! I understand it could be difficult given different feature sets of different routers but I would love it.

Export function should export the group that is selected. This way I could export all routers for a customer and send it over.

This ALSO +1!

The Grouping is where a lot of the focus should be makes things so much easier when you have nearly 100 routers.

Thanks for the update.
Keep up the good work!

I would really like an global option for "Inline comments" (like "Hide passwords")... Even inline comments checked by default in all tables.
The comments on their own line disrupting all the nice tables are annoying.

I would really like an global option for "Inline comments" (like "Hide passwords")... Even inline comments checked by default in all tables.
The comments on their own line disrupting all the nice tables are annoying.

Yes and no - I like a mix so definitely shouldn't remove the ability for certain tables to have certain options.
The comments can make good 'Headings' in the sense of say a Firewall, you might have 2-10 rules per 'goal' you are achieving, placing a comment on the top of the block of rules gives a nice heading and separates the rules out.

The comments can make good 'Headings' in the sense of say a Firewall, you might have 2-10 rules per 'goal' you are achieving, placing a comment on the top of the block of rules gives a nice heading and separates the rules out.

Absolutely agree!!
Firewall rules without proper comments and 'separate sections(*)' would make me crazy

(*) I'm used to create a <dummy> chain with dummy rules (always disabled) to store comments, in this way I can move them easily and even create section separators with a dummy rule with full row comment like ";; =====[ my_label ]============================================"

That's why I have suggested a global checkbox which could be disabled or enabled.
Leave it unchecked and have it as before...

Hi Normis,
great work with Winbox 3

I have one issue:
I had open few windows of winbox and I was upgrading RBs,
and sometimes some RB start reconnecting but after login winbox crash without any message (close).


I have Win7 with last updates.

With regards,
Kuba

using wine sometimes it also stops responding ...

and it juist Quited when i did a wifi scan ...

UI bug in Winbox 3.0b2 with IPSec Policys. Winbox show wrong priority, real value is 0, -1 is shown and no value is accepted, can't save this policy.

I would really like an global option for "Inline comments" (like "Hide passwords")... Even inline comments checked by default in all tables.
The comments on their own line disrupting all the nice tables are annoying.

funny, i had the same tought today, love to see this in winbox.

Using Wine to open winbox I would really like to have "Save as.." in Files
(files are can be "dragged" between winboxes though)

+1 for Global Inline comments

Another +1 for Global in line comments.

Oh and great work on WinBox 3

Please, make login window to be resizeable to a bit smaller height. Its height is really big.

Also I think that Note and Group text boxes isn't necessary on the main login window here. They can be entered in a dialog boxes while saving, that way you can implement an Edit button if needed. Login window will be more clear then. Just IMHO.

Good work!!!
I still wait for:
- an alphabetical order of column in show_columns: for some list it is harder to find wath I want (i.e. ip firewall, interfaces ethernet, ...)
- a smarter default column selection (i.e. the size in partitions, the tunnel id in eoip, ...)

Thanks.

when using the new winbox and afterwards using the old 1 and the dude it shows a blank window with interfaces and wireless not showing

Request- To pull up a no frills terminal window from winbox.

Justify- I've been teaching myself RouterOS for a couple of years now and often open up two instances of Winbox. One for terminal and one to see changes.

Result- Fewer input strokes to reach terminal through Winbox.

Many apologies if I've missed something or this has been dealt with!

Request- To pull up a no frills terminal window from winbox.

Justify- I've been teaching myself RouterOS for a couple of years now and often open up two instances of Winbox. One for terminal and one to see changes.

Result- Fewer input strokes to reach terminal through Winbox.

Many apologies if I've missed something or this has been dealt with!

I don't get it...

When you click "New Terminal" in Winbox, there's a separate window for terminal being opened, and at the same time, you can still open up Winbox windows, and do whatever it is you want. So you should be able to see it all in the same Winbox instance.

Just installed Winbox 3. Two comments:

When I launch it, even if I do nothing else with it, it eats up one entire CPU until I quit it. It does what I ask it to, but my fans rev all the way up and it acts like it's mining bitcoins in the background. I'm running it on a Mac under Parallels, as I have always run winbox. I'm assuming this is the new "neighbors" function, set a little too aggressively?

I'm a little disappointed in the implementation chosen for the groups feature. I had envisioned a folder setup, so that when collapsed all my choices would fit on one screen without scrolling, and I could just "drill down" to the router I wanted, again with a minimum of scrolling. Now either I still have to scroll, or I have to click a pulldown, click a box, type a group expression, and click a filter button, which is a lot more busy work. Plus, you have to click in the router area (select a router you don't really want) at least once to activate scroll-wheel scroll, which may be a limitation of Windows (on the Mac, you get used to being able to wheel-scroll wherever the mouse is hovering, and I get caught short every time this fails to happen).

Groups as they are implemented are actually even more usable if you treat them as keywords. I can name a device's "group" with its location, tower, and AP/CPE/or other function, then pull up all the units on a tower, all the units in a town, all the CPEs, and so on. So it's still a good feature, and if you ever wanted to add the folder thing on top of it, they wouldn't get in each other's way.

Tools - Profile -- disconnect
Load Previous Session - not work!
User Columns - not save!

rb-751

Anyone has same problem with me?
When I use winbox 3, And router run BGP with full routing table, I cant use filter in IP>Route

Bugs in Winbox 3:

I have a list of devices automatically imported from previous Winbox version. When trying to modify one of these entries by adding to them a group name, those items disappear from the list. Even selecting the specific group in the dropdown menu does not help. It is necessary to close Winbox and reopen it to see those entries show up again.

Adding groups to devices and then using again Winbox 2 will make all the groups disappear from the devices. I understand that this could be a behaviour of Winbox 2 which removes unknown fields from device entries. Maybe it should be stated on the known issues.

All display settings are lost between closing Winbox 3, and starting a new Winbox 3 session to the same device, regardless of the setting of "Load previous session".

Thanks, all mentioned bugs submitted to be fixed

I launched winbox 3 today and almost had a heart attack. Of about 100 predefined sites, all had disappeared but about a dozen.

Turns out, if you leave the Neighbors tab selected in winbox when you exit, when it comes back up it is still in the Neighbors tab -- then when you switch to the Managed tab, only some of your defined sites are displayed.

If you quit and then relaunch winbox with the Managed tab active, all your sites show up fine.

I would like to report when using the new Winbox beta in WINE on Ubuntu (12.04 LTS currently), it successfully loads my previous saved routers, but trying to add a group to the router makes it disappear from the list, cant find it with filters or anything.

When closing and re-opening, the missing routers are back, but without a group.

Would be great to have a dedicated Linux client, but thats a discussion for another day I fear

same problem for Ubuntu 14.04

Why there is not crypto-key auth option like in SSH?

On my netbook with 1024x600 res submenu of System too long, last item Users is not visible.

Please, add caption with name/ID of the router to upper panel (where Uptime, Memory, Time, Date and CPU already). I need to see name when winbox.exe is in fullscreen mode on my netbook!

and finally, why, the heck, there is no native linux winbox version? Is it a big deal to switch to multiplatform toolkit?

Webfig works in all OS

Please, think about possibility to add option to open another winbox session directly from IP/neighbors list connecting to selected item from the list.

Of course, these devices could be in different networks with no route from the winbox running computer, but the main winbox client (the one I have neighbors list opned) could provide the connectivity for newly invoked winbox session (something like tunnel) that would appear like the first ROS device is connecting to the second ROS device within its accessibility range.

It is something like telneting from one ROS device to another, just not via telnet but via winbox.

Hope I explained it well, otherwise I am openend to your questions in order to clarify what I meant.

and finally, why, the heck, there is no native linux winbox version? Is it a big deal to switch to multiplatform toolkit?

Winbox works perfect under Wine ....

I like to have a option to add a confirmation message to "Remove" and "Disable" , using keystrokes its now to easy to do something wrong ...

I am unable to use this in Win7 x64.
The window opens with a list of previously saved devices, but nothing appears in the top panel.

In Linux it is better, but I see the same issues others have mentioned with new devices not saving until winbox is restarted.

Hi,

Guys, when I run winbox shows me this window and all controls are gone

That fourth button in the corner, with two arrows, I bet it is the one causing this issue. Uninstall or disable.

OK i will try, but the button is from TeamViewer
You were right disable the fast connection in teamviewer helped

At first I find winbox 3 very neat.

Nevertheless I have found some things I do not really like.

When there are multiple windows open inside the session these can be closed by hitting Esc (except terminal, but I don't mind)
But when all windows are closed the next hit of Esc will close the complete session. I do not like that behavior.
If you want to quickly close all windows, you have to watch out you won't hit it to many times.

Another thing is when a connection is being made and cancel is clicked, winbox is closed completely.
It would be better to end up in the list again.
Now if you have clicked the wrong device and click cancel, winbox is closed and has be started again.

At first I find winbox 3 very neat.

Nevertheless I have found some things I do not really like.

When there are multiple windows open inside the session these can be closed by hitting Esc (except terminal, but I don't mind)
But when all windows are closed the next hit of Esc will close the complete session. I do not like that behavior.
If you want to quickly close all windows, you have to watch out you won't hit it to many times.

Another thing is when a connection is being made and cancel is clicked, winbox is closed completely.
It would be better to end up in the list again.
Now if you have clicked the wrong device and click cancel, winbox is closed and has be started again.

Thanks for the "esc" report, we can repeat the issue.
About cancel button it was reported earlier, and also has been accepted as bug.

At first I find winbox 3 very neat.

Nevertheless I have found some things I do not really like.

When there are multiple windows open inside the session these can be closed by hitting Esc (except terminal, but I don't mind)
But when all windows are closed the next hit of Esc will close the complete session. I do not like that behavior.
If you want to quickly close all windows, you have to watch out you won't hit it to many times.

Another thing is when a connection is being made and cancel is clicked, winbox is closed completely.
It would be better to end up in the list again.
Now if you have clicked the wrong device and click cancel, winbox is closed and has be started again.

Thanks for the "esc" report, we can repeat the issue.
About cancel button it was reported earlier, and also has been accepted as bug.

Normis,

Thank you for your answer!

Another thing I noticed, which I have also seen in version 2 is the inconsistency in showing the CPU/RAM etc in the upper bar.
When these views are enabled, they are not always shown again when a new connection is made.

I keep accidentally deleting saved devices from the list.

Background:
In the previous version you could click in the list and press a letter on the keyboard e.g. "b" to goto "Bobs Building" This does not work any more.

Issue:
If I press "r" to go to "Robs Rowing" it deletes whatever item I have selected at the time.

I know this is just making the logon screen consistent with what the keyboard keys do everywhere else, but it keeps catching me out and I keep deleting entries from my list.

Problem in WinBox 2 and 3 when is Maximized.

In firewall I click on drop-down list of chains and the window list go to strong into right, out of screen.
Screen-shot in attachment.

i would like to save the windows position and sizes after rebooting of the router (disconnected) so you dont have to fix them again the way you like

i would like to save the windows position and sizes after rebooting of the router (disconnected) so you dont have to fix them again the way you like

+1, When I open connection by WinBox, move to other monitor, close it or reboot MTK then next connection is open on my primary monitor.

Hello,
I came by two bugs, one ugly, one particularly nasty:
1) In the VRRP tab there are symbols "RB" on the running master, backups are empty. The expected behaviour is RM on running master and B on backups. Somebody here posted a similar bug report concerning webfig.
2) The nasty bug manifests itself, when you try to add for example a new FORWARD rule in the firewall. I was configuring a jump rule, with a dst address list as a decision parameter. The expected behaviour was that only those packets with dst address on that list will be processed by this rule, but in fact all packets fell in indiscriminately. Needles to say, total havoc in my network ensued.

I would strongly discourage anyone from using this beta Winbox on production boxes. This particular version 3.0b2 should have been marked as a deep alpha instead.

2) The nasty bug manifests itself, when you try to add for example a new FORWARD rule in the firewall. I was configuring a jump rule, with a dst address list as a decision parameter. The expected behaviour was that only those packets with dst address on that list will be processed by this rule, but in fact all packets fell in indiscriminately. Needles to say, total havoc in my network ensued.

any details, please?.. WinBox only adds rules, rules are processed by RouterOS, which is not changed...

As I say - I connected to a router (CCR1036-12G-4S running a v6.7 ROS) via Winbox 3.0b2. I then proceeded to "IP"->"Firewall", I then clicked the "+" to add a new rule (a forward rule in my case). I left everything blank in the "General" tab, except the "In. Interface", which I set to our upstream iface. Then I proceeded to the "Advanced" tab, where I selected a (non-empty) Dst. Address list. Finally I chose "jump" in the Action field and filled in the "Jump Target". The rest of the story you already know...

Needles to say, the old Winbox works as expected.

it's OK.. But for me it would be better if "Save button" and "Connect button" switch places.. what rest of you think ?

When open manual and I need close windows troubleshooting close winbox

A suggestion: can you add the facility to save "view" settings, like a template of columns ?
for example: i add every time src-address-list and dst-address-list as I use them pretty always. I would like to customize this and other colums list and save a template to use instead of finding every time the defaults and have to customize.
would be great to set the columns I like (for me is specially in firewall and routing pages) and save it to reapply when I open a new router, or even have it defined for each and every router I open.

And another one: when I select columns would be great to have the possibility to select more than one at the time. It could be done with checkboxes where there is the checkmark, or with a specific table...

It's a great tool and your products are great, but I have to add many columns every time, it's time wasting and noisy.

Thanks for your work

D.

As I say - I connected to a router (CCR1036-12G-4S running a v6.7 ROS) via Winbox 3.0b2. I then proceeded to "IP"->"Firewall", I then clicked the "+" to add a new rule (a forward rule in my case). I left everything blank in the "General" tab, except the "In. Interface", which I set to our upstream iface. Then I proceeded to the "Advanced" tab, where I selected a (non-empty) Dst. Address list. Finally I chose "jump" in the Action field and filled in the "Jump Target". The rest of the story you already know...

Needles to say, the old Winbox works as expected.

when you add the "nasty" rule, please open the terminal and make a "print detailed" command in the firewall menu. Just to see what Winbox added wrong

Hello,
unfortunately I was unable to reproduce the issue. The router underwent several reboots in course of my attempts to diagnose the VRRP issues. It must have been some race condition, because today the new Winbox works as expected...

I found a bug in Winbox 3 beta 2.

To reproduce,

1: While running Windows 7 SP1
2: Open Winbox 3 beta 2
3: Switch to the neighbors tab 4: Click refresh a few times, the list fails to populate sometimes. 5: To fix the issue, Winbox must be restarted.

R

Where can i found winbox 2? There is no link on download page, only to winbox 3 beta.
I dont want to be your beta-tester, just need to do my job.

Where can i found winbox 2? There is no link on download page, only to winbox 3 beta.
I dont want to be your beta-tester, just need to do my job.

Winbox 2 is included in RouterOS. You don't need to download it. Just open your IP address in the webbrowser, like always. Winbox link is there.

Winbox 3 beta has some ugly bugs: really is not ready for use.
I expected the main changes only il launcher, considering that plugins are downloaded from the device.

Why new features break consolidated ones?

VRRP: winbox says an interface is backup, in console or winbox2 I can see it is master IPSEC: in winbox3 you can't touch a policy: every time there is an error because priority goes to value "-1" (in console or winbox2 is "0") and the error is even more confusing, complaining every time for a value out of range where range includes all my tries. D.

dtoffo, these were reported above, and I already sait we are fixing them. thanks

The bug "session settings are not remembered" is only valid for routeros v6. I just opened a board with routeros v5 and the last session was remembered correctly.

FYI - time to press "Check for update" button!!!
as far as i can see Winbox 3.0beta3 is out

Don't get your hopes up, this is a minor release.

Winbox still can't save window state, and some other of the reported issues are not fixed.

v3.0b3 bugs:
winbox sometimes closes, when closing Quick Set by pressing Esc.
winbox always closes, when do the sequence: open Quick Set - close by Esc - open Quick Set
winbox always closes, when closing Manual by Esc.

upd:
winbox 3 loses group settings after opening winbox v2. so it's difficult to use both v2 and v3 alternatively.

Thanks SO MUCH for implementing the show categories for grouping by group

Makes it so much better to organise heaps of routers.

Webfig works in all OS

Ok so how in webfig do you "find" a routeros box with unknown or reset IP? Either that or fix winbox under linux so that the search for mac routerOS feature works under wine. At one time it did but it's not consistent enough like it would be with a native linux version.

...how in webfig do you "find" a routeros box with unknown or reset IP?...

Inside another webfig on anoter RouterBOARD.

tried the same steps, it does scroll down automatically when new command pasted in terminal. must be some specific thing in windows or else. I have MacOS with Wine and Winbox 3 beta 2

What is your sorting order in Log? Newest on top or newest on bottom?
My newest are on bottom, and I have to manually scrolled all the way down every time.

Ditto. Went nuts recently trying to see why CPE would not register to AP, in neighborhood with many unrelated APs. Log consistently appended off the bottom of the screen and needed to be manually scrolled. Could NOT get log to "scroll itself up" by moving scroll box to the very bottom. Worse, even though log was appending off the bottom of the screen, if you manually scrolled back to a specific spot in the log to read it, those lines would not stay still, but would move around as the log grew. Looked for the "Freeze" button to stop this behavior, and it is no longer in the beta winbox!

I repeatedly see a behavior where winbox beta says "Logging in," flashes up the large work window, and then the window immediately disappears.

I do wish "export" and "import" were somewhere else out of the way, like in the upper right-hand corner, suitable for a rarely-used control. I keep hitting them when I mean to hit "managed" or "neighbors."

Webfig works in all OS

Ok so how in webfig do you "find" a routeros box with unknown or reset IP? Either that or fix winbox under linux so that the search for mac routerOS feature works under wine. At one time it did but it's not consistent enough like it would be with a native linux version.

Latest version of Winbox2 + Both Winbox3beta2 and beta3 both work fine under my Ubuntu 12.04.4 desktop running WINE

If you drag and drop a file from the Windows file system onto a routerboard, winbox 3 never closes the file on the Windows side. This causes Windows to complain that you can't edit the file because "somebody else" has it open. If you try to delete the file, winbox 3 will be identified as the culprit. You have to quit winbox to be able to edit or delete the file.

better picture

just tried Winbox v3.0beta3. It crashes after clicking the "Connect" button to login.

Before that, V3 beta2 works fine, at least can use.
Environment: Win7 Ultimate 64 bit, RB2011UAS-2HnD with 6.18

====
Windows popup "winbox.exe has stopped working" with following details...

Problem signature:
Problem Event Name: APPCRASH
Application Name: winbox.exe
Application Version: 0.0.0.0
Application Timestamp: 53db57a7
Fault Module Name: StackHash_d404
Fault Module Version: 6.1.7601.18247
Fault Module Timestamp: 521ea8e7
Exception Code: c0000374
Exception Offset: 000ce753
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: d404
Additional Information 2: d404de6998512d67888464546cbd239b
Additional Information 3: 0778
Additional Information 4: 0778d189325617d8f631da4129a41ed3

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid= ... cid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

When I select "Profile", the program crashes.....

i confirm this crashes everytime.

I have the same problem as @kikikaka, same behavior with the same environment and winbox version Also since this is a beta release, where we can find the old stable release? You have removed it from download although there is no other stable release..

I have the same problem as @kikikaka, same behavior with the same environment and winbox version

Code: Select all

Problem signature:
  Problem Event Name:	APPCRASH
  Application Name:	winbox.exe
  Application Version:	0.0.0.0
  Application Timestamp:	53db57a7
  Fault Module Name:	StackHash_d4cb
  Fault Module Version:	6.1.7601.18247
  Fault Module Timestamp:	521ea8e7
  Exception Code:	c0000374
  Exception Offset:	000ce753
  OS Version:	6.1.7601.2.1.0.256.1
  Locale ID:	1033
  Additional Information 1:	d4cb
  Additional Information 2:	d4cb659affa21e9adb7cb973ef65a5e6
  Additional Information 3:	0f84
  Additional Information 4:	0f8498f24c7bac944d9a377037ef0d07

Also since this is a beta release, where we can find the old stable release? You have removed it from download although there is no other stable release..

Like normis said before. The old version 2 can be retrieved from the routerboard itself. Go to the ip via webbrowser and download the exe file

Nice !!

Hi, please maybe there is a problem with adding a new policy in IPSEC - Only in WinBox 3

It is not posible to add new policy in WinBox 3, in old version it is OK.

In WinBox version 3, inputbox "priority" is still in red
Message:
"Error in Priority - Integer in range [0;-1] expected!"


RB12000 6.15

Hi, please maybe there is a problem with adding a new policy in IPSEC - Only in WinBox 3

It is not posible to add new policy in WinBox 3, in old version it is OK.

In WinBox version 3, inputbox "priority" is still in red
Message:
"Error in Priority - Integer in range [0;-1] expected!"


RB12000 6.15

There are some 3 or 4 reports with this problem already on the forum It is fixed in Winbox 3beta2, please upgrade winbox, in the loader push "check for updates"

IP -> Routes filters not working properly

It doesn't show Dst Address on the filter list (only shows if you list all routes)

Hi,

After uprgade to beta3 log is again unsorted, like in winbox v2. Is it normal?

Thanks, most likely a bug

v3.0beta3 does not work at all on my pc.
At least on boards with v6 installed - I click connect, it says Logging in, Downloading plugins and then nothing happens - no error message, no winbox window, it just closes.
Tested to open a board with routeros v5 - works normally.

v3.0beta3 does not work at all on my pc.
At least on boards with v6 installed - I click connect, it says Logging in, Downloading plugins and then nothing happens - no error message, no winbox window, it just closes.
Tested to open a board with routeros v5 - works normally.

What kind of Routerboards are you using. I have multiple mipsbe based devices and all are connecting normally with Router OS 6.5 installed.

Almost everything with mipsbe from v6.7 to v6.18

I can log in to mipsbe devices with Beta3 running 6.1, 6.15 and 6.18 (all i have to test straight away).

As you are able, it adds a tab in winboxie recently used hosts, alongside neighbors.

After connect, click "Quick Set" and "Cancel" and again "Quick Set" - winbox window just closes.

suggestion

when viewing log, having the option to clear the screen of log; filter and locate.

v3.0beta3 does not work at all on my pc.
At least on boards with v6 installed - I click connect, it says Logging in, Downloading plugins and then nothing happens - no error message, no winbox window, it just closes.
Tested to open a board with routeros v5 - works normally.

Same happens on my Vista 32bit, the only difference is, "microsoft checking solution" message.
On win7 64bit beta3 works.

After entering the address and password, I click on "Connect" and Winbox3.0b3 crashes:

The design of having the naked letter "r" remove entries is awful human engineering. Click (but miss) the password field, start typing a password with an "r" in it, and you (silently) delete whatever entry was chosen before you realize it -- and there is no undo!

In the old Winbox, if I clicked "make supout.rif" and named the supout x, I'm pretty sure it would make a file named x.rif. The beta Winbox just makes a file named x.

When drag-and-drop copying files to a router via Winbox, the old WInbox used to let you access the main window during the copy (to check Files, Queues, resize the window, or whatever). The new Winbox just gives you an error beep if you try to click anywhere on the main window while the copying dialog window is live.

Hi,

When I use WinBox3b3 then sometimes I can not access second level menu eg. System/Clock.
The just popped up submenu does not take focus on itself. When I activate first level action
eg. Log then submenus work again.

It is not constant behavior. It happens from time to time.

Winbox 3 beta3, Win7 x64: A bug when using TeamViewer 9. (same issue which pppixel posted about on page 2)

Winbox interface with TeamViewer running:


Winbox interface without TeamViewer running:

This is not a Winbox bug specifically, Teamviewer ruins all kinds of applications. Just don't use that Quick launch button

found a bug with similar graphics issues to the one above.

If i modify the name of winbox i get that graphical issue. fix the name and i fix the graphics

Hello, this surely are not bugs, but are things that made easy to work with the previous version.
I don't save passwords and when I double-click a device in the list winbox automatically tries to connect without asking a password nor setting focus on password text box. The previous version did.
Ahother one, when I had too much child windows I keep pressed ctrl+f4 and all child windows closed except the main. Now the main windows closes too. I think it should close with alt+f4 not ctrl+f4.
And last, when a double-click an input box, address password... anything, it doesn't select the text.
Thanks in advance. These are small things but makes you able to work faster.

Hello,
new version is great, but there is tiny "bug".
When I sort managed routers by Address, it sorts it not by value but as string, e.g.:

172.16.1.10
172.16.1.11
172.16.1.2
172.16.1.3

It should sort like this:

172.16.1.2
172.16.1.3
172.16.1.10
172.16.1.11

Thanks

It is ASCII-order used from ages in sorting.
"1" < "11" < "2" < "22" < "23" < "A" < "a" ......

Next problem could be order of
172.16.16.0/24
172.16.16.0/16
which one is "less" ?

Next problem could be order of
172.16.16.0/24
172.16.16.0/16
which one is "less" ?

he says about router IPs. you cannot have 172.16.16.0/24 as host address

It is ASCII-order used from ages in sorting.
"1" < "11" < "2" < "22" < "23" < "A" < "a" ......

Of course it is, but it is an inappropriate choice of sort to use in this context. Sorting that way helps no one, and just makes other people's jobs harder.

Next problem could be order of
172.16.16.0/24
172.16.16.0/16
which one is "less" ?

/IP route display has no problem figuring that out, use the same algorithm.

While you're at it, can you please fix the long-standing bug with non-working clipboard shortcuts?

There are two sets of them in Windows:
(a) well-known Ctrl+X/C/V
(b) less known Shift+Del (cut), Ctrl+Ins (copy) and Shift+Ins (paste)

Many people may not even know about the second, but they do exist and in fact worked in every single program I've ever used so far. Just try it, if you don't believe me. In every Windows from 3.1 to 8.1, in every program, it works just fine. The only exception are newer WinBox versions (since ROS 4.x I think). I'm sure that in WinBox it's not left out intentionally, it's most likely just result of implementing own edit controls (it worked in old versions, where standard edits were used) and nobody at MikroTik using (b) shortcuts.

I would love the feature to backup all the routers that are managed by winbox in one click

Suggestion: Winbox currently does not display or handle changes to the POE configuration value ether1‑poe‑in‑long‑cable. Winbox knows to display POE-out ports with an additional POE panel showing status, power consumption, etc.—it should also have a POE panel for the POE-in port of a POE-out Routerboard that shows the “long cable” setting. This will also help clarify that this setting applies to the cable length on the POE-in port instead of the POE-out ports.

Hello!
Thank you so much for new WinBox version!

Please make possibility to work as portable app. This will help us to create a crypted(axcrypt) portable usb flash drive with our data. Maybe like utorrent with settings.dat.

Thank you!

Hello. My observations :
- Winbox3 has a tendency to eat all CPU it can. Right after it is started. Stops when minimized. In fact, CPU consumption is dependant on window size.
- Please add an option to disable the leading rows for each new letter. For lists with a few hosts it actually hurts visibility.

Below the search field set as the primary note. Most searches by notes than by IP addresses

-ZS

As mentioned by a few people, Tools => Profile crashes winbox

Crashes with all versions of ROS, v4, v5, v6 and winbox Beta

Ham
Tools --> Profile = all is ok!

ROS = 6.18
OS = Win XP Home x32.

Winbox 3 from wine linux
log window


Old Winbox
log window You can not change the width of the field

Yes, log column adjustment is a new feature of winbox3. it was never there in winbox 2

cyrillic not working in the new version in this window. red circled
In the old version of the English month New What?

Winbox 3 does not save "Inline comments" settings between sessions. Winbox 2 does.

I'd like to post a feature request for Winbox 3 - have an option (like the hide passwords option) for confirm disable/delete of items with a confirmation dialog.

I was working on something and accidentally moved focus back to winbox and hit delete - there goes one of my main transit link VLAN's had to add back in. Got me thinking it'd be nice to have an option to set it to force a confirmation on disable/delete. I can see how this could get annoying which is why I'm also suggesting it be able to be turned off.

I'd like to post a feature request for Winbox 3 - have an option (like the hide passwords option) for confirm disable/delete of items with a confirmation dialog.

I was working on something and accidentally moved focus back to winbox and hit delete - there goes one of my main transit link VLAN's had to add back in. Got me thinking it'd be nice to have an option to set it to force a confirmation on disable/delete. I can see how this could get annoying which is why I'm also suggesting it be able to be turned off.

I too have had similar problems, usually accidentally changing route-filter or firewall-filter policy orders when using a trackpad on a laptop. I solved this by making WinBox access Read Only, forcing all changes to be done from the CLI.

This also makes you think a little more before making changes

I'd like to post a feature request for Winbox 3 - have an option (like the hide passwords option) for confirm disable/delete of items with a confirmation dialog.

I was working on something and accidentally moved focus back to winbox and hit delete - there goes one of my main transit link VLAN's had to add back in. Got me thinking it'd be nice to have an option to set it to force a confirmation on disable/delete. I can see how this could get annoying which is why I'm also suggesting it be able to be turned off.

I too have had similar problems, usually accidentally changing route-filter or firewall-filter policy orders when using a trackpad on a laptop. I solved this by making WinBox access Read Only, forcing all changes to be done from the CLI.

This also makes you think a little more before making changes

The original proposal is ambiguous. If you are in the window where you are talking to a router, you should be able to undo an accidental delete or disable with the counterclockwise arrow button in the upper left. If you are in the initial "list of hosts" window, indeed there is no undo capability there (and maybe should be), but then the mention of "disabling" something doesn't make sense.

The original proposal is ambiguous. If you are in the window where you are talking to a router, you should be able to undo an accidental delete or disable with the counterclockwise arrow button in the upper left. If you are in the initial "list of hosts" window, indeed there is no undo capability there (and maybe should be), but then the mention of "disabling" something doesn't make sense.

Agreed, this works most of the time. Apart from when you don't have safe mode on, then accidentally delete an interface and cannot get on the router, or move a route filter and stop advertising the management IP's range to the internet.

The Revert button and "Safe Mode" protect the user from the majority of mistakes.

I would be more interested in seeing RouterOS "version" the changes and allow you to "roll-back" to a change point, like JunOS.

I would be more interested in seeing RouterOS "version" the changes and allow you to "roll-back" to a change point, like JunOS.

This is kind of achieved with partitioning - I tend to copy running config to next partition when I am happy that its stable, so I always have a stable config to go back to (same with ROS version). This works better on the bigger routers that have more space - for instance, on the CCR i run 3 partitions so I can have stable ROS/Config, Upgraded ROS and upgraded config, so I should at the least always have a rollback to a version and config that I know to be stable .

Either way I see an optional confirmation on delete/disable as not too hard of a thing to implement, especially while its still in beta

Hello. My observations :
- Winbox3 has a tendency to eat all CPU it can. Right after it is started. Stops when minimized. In fact, CPU consumption is dependant on window size.
- Please add an option to disable the leading rows for each new letter. For lists with a few hosts it actually hurts visibility.

Add to that, on random ocassions some hosts get missing from the list. Restart Winbox3 and they are back.
I'm sorry to say that I am falling back to old winbox. Winbox 3 offers no big advantages over previous version while introducing some annoying things.
You shouldn't post this version as a default download. It's not ready.

WinBox3 should automatically connect to selected host after double-click only when "Keep password" is selected for that host to prevent unsuccessful logins with empty passwords

no chances to have ports lists, like we're already have adress-lists ? ability to have protocols lists(to elegantly/compact white/black-list and manage them across network)would be welcomed too, but not as much necesity as previous request.
and add not only "src MAC" for filters, but also "dst MAC", probably ?

Good Afternoon

Why not a Winbox App for Mac Users?

Thanks

Because professional WISP do not use any apple device.

Good Afternoon

Why not a Winbox App for Mac Users?

Thanks

for Mac there a would be made MacBox, probably.
and/or WinBox in fully cross-platform shape, like writenn over Qt libs or Vxwidgets.

Because professional WISP do not use any apple device.

proffestionals not use Mac at all.
thats major credo, major development/design emphasis and major taget consumers category of Apple for decades.

p.s.
but talking seriously, making WinBox available across All platforms, like xBSD, Android, Linux, "MacOS", BeOS, WinMobile would be nice and very helpful. and woul benefit MT in long-term, but demand HR resources&time, MT may lack, sadly.
technically there was some folks(two if i was remember right?), showing mild interest about creating tablets-oriented["metro"-styled] alternative working over API for Android, two years ago, but development even not started, sadly.

v3.0beta3 does not work at all on my pc.
At least on boards with v6 installed - I click connect, it says Logging in, Downloading plugins and then nothing happens - no error message, no winbox window, it just closes.
Tested to open a board with routeros v5 - works normally.

I have the exact same problem. Using beta 3 on Windows 7 64-bit to connect to an RB433. This makes the new Winbox version unusable for now.

v3.0beta3 does not work at all on my pc.
At least on boards with v6 installed - I click connect, it says Logging in, Downloading plugins and then nothing happens - no error message, no winbox window, it just closes.
Tested to open a board with routeros v5 - works normally.

I have the exact same problem. Using beta 3 on Windows 7 64-bit to connect to an RB433. This makes the new Winbox version unusable for now.

Same problem here as well.

Same problem.

the same with rb951-2n on win7 32bit.
strange that mikrotik didn't leave alternative link to old winbox

All display settings are lost between closing Winbox 3, and starting a new Winbox 3 session to the same device, regardless of the setting of "Load previous session".

Any estimate when this one's going to be fixed? The same issue persists with version 3.0beta3. Thanks.

beta 3 doesnt work for me either on W&-64bit doesn't matter what boxes I have on the other side just doesnt come up

leon

when i click on a router to connect, the app crashes

can not paste screenshot in for some reason my laptop is not capturing it

winboxv3beta.exe has stopped working

Check online for a solution and close program
Close the program

was able to get this from the dialog box:

Problem signature:
Problem Event Name: APPCRASH
Application Name: winboxv3beta.exe
Application Version: 0.0.0.0
Application Timestamp: 53db57a7
Fault Module Name: StackHash_2794
Fault Module Version: 6.1.7601.18247
Fault Module Timestamp: 521ea8e7
Exception Code: c0000374
Exception Offset: 000ce753
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 2794
Additional Information 2: 279499d77f3ea845850e0c6e10050ba8
Additional Information 3: 93f4
Additional Information 4: 93f4fb4e5f7aed69f212f63608a17fe5

Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid= ... cid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

I believe the following is a new bug in beta 3.

If I sort the site list by address, then quit Winbox, when I relaunch WInbox around a quarter of the Group entries show up blank. If I sort by Group, they sort as blank. If I leave them sorted by Group, then quit and relaunch Winbox, all the Group contents show up again.

This is similar to the (still unfixed) issue in which if you quit Winbox when in the Neighbors tab, when you relaunch Winbox and go to the Managed tab, most of your sites have simply disappeared, and you have to relaunch Winbox again to get them back. This one hits me every day.

My winbox 2 is constantly overwriting and removing ALL group info from winbox 3 beta.

It would be nice to have in winbox a 'load configuration file' or 'choose config file' so you could potentially have multiple, 1 for 1 network, 1 for the other etc.

Or at the least - while this is on beta, create a separate winboxbeta.cfg, and on first load if winboxbeta.cfg doesnt exist copy details from winbox.cfg but keep them separate.

I'm loving the sort by group, would be good if the Group heading when 'show categories' is set, could be collapsable as well, so you can just have all closed except for the group your interested in.

Just a few ideas =)

beta 3 doesnt work for me either on W&-64bit doesn't matter what boxes I have on the other side just doesnt come up

leon

worked fine on my Win8.1up and Win7 sp x64 boxes. just in case of something specific - try update ACT from MS sites or use "compatibility" tab on WinBox binaries, as desperate/temporal measure.

I'd also like to report that when I was on an OmniTik - I was specifically looking at the Wireless Registration table but when a client registers it crashed my Winbox. Unfortunately I can't get meaningful stack traces as I am running in WINE on Ubuntu. Not sure if it happens with other wireless AP routers, I will have to test.

I also have the "Crash when connecting" issue with Winbox Beta3. Beta2 works fine. I'm running Windows 8 x64, reasonably fresh build.

Winbox loads fine to the point where it's connecting to the router, seems to download plugins etc and tries to log in, then it quits and you get the "winxbox.exe has stopped working" dialog.

Problem signature:
Problem Event Name: APPCRASH
Application Name: winbox.exe
Application Version: 0.0.0.0
Application Timestamp: 53db57a7
Fault Module Name: StackHash_698a
Fault Module Version: 6.1.7601.18247
Fault Module Timestamp: 521ea8e7
Exception Code: c0000374
Exception Offset: 000ce753
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057
Additional Information 1: 698a
Additional Information 2: 698a2fe26df62048442b6533d223699a
Additional Information 3: 4166
Additional Information 4: 4166c4e4c0624d7078e809242961e1ca



PS: Running as Administrator, or using compatability options seems to make no difference.

I have to check the Open In New Window box, otherwise Winbox v3.0beta3 crashes after pressing the Connect button (Windows 7 SP1).

I have to check the Open In New Window box, otherwise Winbox v3.0beta3 crashes after pressing the Connect button (Windows 7 SP1).

Confirmed, this also works for me. Cheers!

Since beta 3, the Group function is just flaky.

When launched in Managed mode, sometimes all the Group fields are populated (I have a Group defined for every unit), and sometimes some (maybe 10-20%) show as blank. If you sort them, the ones that appear blank will all sort first. Yet if you single-click on one of them, the five top fields (Connect to .. Group) all come up properly, including the correct Group.

When launched in Managed mode, and I add a new router with a non-blank group, the router always appears in the list with a blank group. The group of the new router will not appear until I quit and relaunch, and that's assuming I don't encounter one of those launches where 10-20% of the groups show as blank.

After the announcement that 6.20 will only work with Winbox3, I started testing it a bit. I'm using Windows 7 SP1 x64 and have found that it can only save 5.x window sessions (it might save them but definitely can't load them). 6.x sessions are always started with a blank window, regardless of the state of the "Load Previous Session" switch. Please fix this before mandating the use of Winbox3 for newer ROS versions.

Noyo, why is a changed button location a bug?

We suggest to read the label of any buttons that you intend to push. This will get you out of most trouble in life.

For me this is a problem, because I am a visual learner and almost clear the wlan on the mast
This change is very cumbersome, because of that you can clear the wlan1.

Nice upgrade.

Bug to report - when using a laptop with a dock and external monitor and have Winbox running on the monitor, if you later try to operate winbox, it "opens" on the missing display. there is no option to move the window back to the main display - haven't found a standard windows option / keypress that will return it to the display.

Thanks.

Hey Normis...As I, and others, have mentioned this V3 version is a show stopper since it crashes on W7. What are you guys doing to fix this. I also agree not to hold us hostage on buggy software.

Thanks leon

solution was already there. thanks for this.

When running bandwidth test in Winbox 3, the little box at the bottom that shows TX and RX is very undependable. If you run a TX test, collect some data, then run an RX test, the RX graph lines start from the left hand side of the existing TX graph lines, and the box at the bottom reports nothing except the old TX figure, until the RX graph lines reach the right hand edge, then suddenly the box reports RX figures. Overall, the test runs properly, but the box does not report it properly.

btw is ANY chance to make WinBox portable(eg: re-write it over Qt or Vx? ) in future?
ie available not only as Windows binary but on all Desktop and probably mobile plaforms at-once.
in WinBox 4, 5, maybe ? :-"|

Winbox version: 3.beta3
Windows 7 SP1 x64
Mikrotik version 6.19

One more bug:

- Connecto to a mt
- Press QuickSet
-Press Cancel
- Winbox crash! If does not crash, press again QuickSet. It will crash all the times

After the announcement that 6.20 will only work with Winbox3, I started testing it a bit. I'm using Windows 7 SP1 x64 and have found that it can only save 5.x window sessions (it might save them but definitely can't load them). 6.x sessions are always started with a blank window, regardless of the state of the "Load Previous Session" switch. Please fix this before mandating the use of Winbox3 for newer ROS versions.

I think its too early as winbox v3 is still too buggy!

btw is ANY chance to make WinBox portable(eg: re-write it over Qt or Vx? ) in future?
ie available not only as Windows binary but on all Desktop and probably mobile plaforms at-once.
in WinBox 4, 5, maybe ? :-"|

Their cross platform solution is Webfig - so it is unlikely.

For mobile devices - you have the API to make clients with. I'd imagine full Winbox functionality wouldn't be used too much on iOS/Android, more so just to monitor and grab stats which can be done via API.

Also - winbox appears to run quite OK in WINE on *nix and OSX. I use Ubuntu exclusively and run both winbox and winbox beta no problems.

I'd imagine full Winbox functionality wouldn't be used too much on iOS/Android, more so just to monitor and grab stats which can be done via API.

When I'm up on a roof or a tower trying to repair a node that isn't communicating, and need to see what a remote tower is seeing as I try to reconnect, I'd be extremely happy to have Winbox on my iPhone or iPad. Instead, I have to use webfig, which is extremely awkward and ponderous on a small screen.

"Escape" is not closing the windows in the new version

I'd imagine full Winbox functionality wouldn't be used too much on iOS/Android, more so just to monitor and grab stats which can be done via API.

When I'm up on a roof or a tower trying to repair a node that isn't communicating, and need to see what a remote tower is seeing as I try to reconnect, I'd be extremely happy to have Winbox on my iPhone or iPad. Instead, I have to use webfig, which is extremely awkward and ponderous on a small screen.

What functionality does Winbox have that a mobile optimised app using the API couldn't do?

Keeping in mind - due to the locked down nature of mobile OS's, even with a proper 'winbox' client from MTik, MAC discovery/connection would probably be unavailable?

What functionality does Winbox have that a mobile optimised app using the API couldn't do?

That's not a very interesting question unless you have one to suggest, and I don't know of any. My point is that I need to do more than just "monitor and collect stats." I also need to control and reconfigure.

I have a problem with this version, this version don't save session for me.
Is it normal or there is an error on my PC.

Router board : rb951ui -2Hnd
Router board version : 6.16
My OS : Win 8.1 pro x64

add WOL to GUI, also add the ability to change mac for interface in winbox as well!!!!

Is there any estimate of when the next beta will be available where we will see some of the bigger problems fixed? Having to relaunch Winbox to get my entire router list back, and having to re-open the windows I purposely left open on every connection I access is getting very tedious. Thanks.

There is a bug that i cannot stand

When using winbox version 3, it will not let me copy and paste anything via either CTRL+V or right-click to paste.

I run about 30 mikrotiks all over Florida and each one has at least 2 separate admin accounts, each with 24 character randomly generated password which I keep in our password database for the rest of my team. My policy states that passwords cannot be cached on any local computer, or stored in an unencrypted format.

SO what we need to do is look up the username and password combination in our Password Database, and then copy these credentials to the Winbox interface, and then log in. But in version3 we cannot do that.

Another use case, In setting up passwords on a new Mikrotik, we use our password generator to generate random 24 - 36 character passwords for admin credentials. Basically, we don't reuse passwords anywhere and the minimum credentials are randomly generated and at least 24 characters long. SO what we want to do is generate the password in our password system, and then copy it to Winbox when we create the credential to prevent miskeying the new password. This works in version 2.x but not in 3.

The final use case is that we have a lab where we develop requested rules for clients. When they ask for a new function or config change, we write the rules in our demo equipment, and then we export the command using the export function to get the code for that rule. Then we login to their Mikrotik and apply it in a terminal window. (We sell a Mikrotik Management service where we manage and maintain their firewalls.) Again this works in version 2.x but not in 3.

Essentially, copy and paste simply does not work for us in Version 3 at all.

Log window enhancements gone in B3.

If I start Winbox3B2 and connect to a router, the log window allows resizing the columns. If I start Winbox3B3 and connect to the same route, the log window does not allow resizing columns.

The B2 log window has filtering and the B3 log window has a freeze button (save as Winbox2).

Trying winbox 3, and i cannot seem to save sessions, i have tried all, do not load and then exit, it would just load blank, anybody else with same issues ?

thanks,

Trying winbox 3, and i cannot seem to save sessions, i have tried all, do not load and then exit, it would just load blank, anybody else with same issues ?

Many people have already encountered and reported this.

Some bugs I found on winbox 3 beta 3:

- Some windows don't autorefresh: for example 'Firewall > Address List' and 'Wireless Tables > Registration'
- I get random crashes that don't seem to be connected to a specific action.

i have tried 4 computers on beta 3.3 non work. it shows logging in, and that was it??

I was going to try and shift to ver 3, and made all the groups, all looked nice, till i accidentally fired up ver 2, and all groups were lost !

the only session which was saved was with a router running x86 5.26, all the other i just cannot save session. I hope it does not become mandatory on Router OS next release.

I was going to try and shift to ver 3, and made all the groups, all looked nice, till i accidentally fired up ver 2, and all groups were lost !

Yup. Export your router list to a file regularly to protect against loss in case you should ever again fire up v2 by mistake.

it cannot scan the device?
old version can.

you can press neighbours so it shows the devices

This is not to report a bug but a feature I didn't expect!

Just noticed that under Os X (winebottled) drag n drop is working from finder to Winbox (not from Winbox to finder) but most useful: from winbox window to other winbox window (between routers! great!!)

feature a address book in cloud service for sync with username & password

When new version avalible?

feature a address book in cloud service for sync with username & password

I wouldn't want my router logins sync'd with the cloud, but the ability to save to a central location would be nice.

I'd imagine full Winbox functionality wouldn't be used too much on iOS/Android, more so just to monitor and grab stats which can be done via API.

When I'm up on a roof or a tower trying to repair a node that isn't communicating, and need to see what a remote tower is seeing as I try to reconnect, I'd be extremely happy to have Winbox on my iPhone or iPad. Instead, I have to use webfig, which is extremely awkward and ponderous on a small screen.

What functionality does Winbox have that a mobile optimised app using the API couldn't do?

Keeping in mind - due to the locked down nature of mobile OS's, even with a proper 'winbox' client from MTik, MAC discovery/connection would probably be unavailable?

My mobile (Android and MAC) happily discovers Sonos or Google Chromecast devices on layer 2 - why not Mikrotik ?

probably found a bug.
imidiatlly after login thru Winbox v3.0beta3 and hit quick set and than just hit OK button after this winbox freeze or just close itself.

here also, win7, if I don't use "open in new window" winbox craches after "connect"...

bad software