Sorry, this is the main link 43 km on old software
another link to complete de full link
after upgrade main link but nv1 very stable 200 mbps 1- 2 ms
config nv1 ap
/interface wireless
set [ find default-name=wlan1 ] ampdu-priorities="" band=5ghz-onlyac \
basic-rates-a/g="" bridge-mode=disabled channel-width=20/40mhz-Ce \
disabled=no disconnect-timeout=1s frequency=5420 frequency-mode=\
superchannel l2mtu=1600 max-station-count=2 mode=bridge name=Wireless \
nv2-cell-radius=48 radio-name="N2SLink SD-PA" rate-set=configured \
rx-chains=0,1 scan-list=5420 security-profile=Security ssid=\
"N2SLink SD-PA" supported-rates-a/g="" tdma-period-size=3 tx-chains=0,1 \
vht-supported-mcs=mcs0-7,mcs0-7 wds-default-bridge=Bridge wds-mode=\
dynamic wireless-protocol=nstreme
/interface wireless nstreme
set Wireless enable-nstreme=yes framer-limit=3998 framer-policy=best-fit
confi nv1 st
/interface wireless
set [ find default-name=wlan1 ] ampdu-priorities="" band=5ghz-a/n/ac \
basic-rates-a/g="" channel-width=20/40mhz-Ce disabled=no \
disconnect-timeout=1s frequency=5420 frequency-mode=superchannel l2mtu=\
1600 mode=station-wds name=Wireless radio-name="N2SLink PA-SD" rate-set=\
configured rx-chains=0,1 scan-list=5420 security-profile=Security ssid=\
"N2SLink SD-PA" supported-rates-a/g="" tx-chains=0,1 vht-supported-mcs=\
mcs0-7,mcs0-7 wireless-protocol=nstreme
/interface wireless nstreme
set Wireless enable-nstreme=yes
on nv2 de only diference is that i use tdma period size static on 3ms for more than 30km on less 2ms and at least 5 km more on cell radius.
You do not have the required permissions to view the files attached to this post.