Currently I'm using my "HTC Desire HD" phone for my temporary internet connection via USB tethering with my "MikroTik RB2011UiAS-2HnD-IN" router. I've plugged it in and everything worked fine. It's listed as lte1 in the interfaces list. When I remove the phone and plug it in again it will not work anymore.
- it's not listed under "Interfaces" in Winbox
- on "IP > DHCP Client" there is an old entry with "unknown"-Device
If I restore the backup which I have created during the running configuration it will work again.
In both cases the device is listed in the
/system resource usb print
output.
How do I have to reinitialize/redetect my phone again?
Re: Phone backup connection
if i disconnect and latter connect LG P970 to RouterBoard its understands it is same device and doesn't crate new interface.
Could you try different android phone.
Could you try different android phone.
Re: Phone backup connection
I currently dont have a second device for testing. How can I create the interface manualy? I've also tried to power-off/on the Routerboard.
But everytime I restore the old backup which I have created during the functional connection the phone will work again.
But everytime I restore the old backup which I have created during the functional connection the phone will work again.
Re: Phone backup connection
In the working configuration /system resource usb print output looks like this
After disconnection/reconnecting the phone the output is like this
Device 1:4 instead of 1:2.
Is it possible to reset all USB configurations on the Routerboard? My idea is that if the Routerboard detect the phone on 1:2 it should work again.
The /export compact output looks like this:
I tried to do the commands manually but without success.
Code: Select all
[admin@gateway] > /system resource usb print
# DEVICE VENDOR NAME SPEED
0 1:1 Linux 3.3.5 ehci_hcd RB400 EHCI 480 Mbps
1 1:2 HTC Android Phone 480 MbpsCode: Select all
[admin@gateway] /interface lte> /system resource usb print
# DEVICE VENDOR NAME SPEED
0 1:1 Linux 3.3.5 ehci_hcd RB400 EHCI 480 Mbps
1 1:4 HTC Android Phone 480 MbpsIs it possible to reset all USB configurations on the Routerboard? My idea is that if the Routerboard detect the phone on 1:2 it should work again.
The /export compact output looks like this:
Code: Select all
/interface lte
set [ find ] mac-address=EE:E8:BB:AE:EC:13 name=lte1