Hello Folks!
From the release of the product we have had problem with CCR1016-12G.
This is not anything new, it happens all the time, at least one time per every 2 months interval, we had it for almost 2 years now.
The device simply stops working, it does not pass any traffic at all on any ports, all lamps are on as usual.
There is nothing in logs, no supout file nothing, it just stops passing traffic....
We have upgraded it everytime a new firmware came out, but nothing, problem remains.
Mikrotik has been helpful giving us hints and we disabled the LED display to mitigate the problem, it made situation better, but not as stable it should be.
Unfortunately the device is out of warrancy, if it hat we would return it, because we think it is a hardware problem since no RoS release made fixing the problem, it is the same all time.
I will open a case and send in supout file, but I am in very doubt over this product now.
Anyone who have the same problem with CCR family ?
Looking little more, I can see that CCR has lost dhcp-client address on ethernet2, lease expired it says.
The Dude reported 07:53 this morning, whole that site was red in logs.
Inside CCR1016 logs it is written 08:06 dhcp lease expired.
It means in my world, that the router was working internally, but all it's ethernet interfaces was stopping passing traffic or something.
This error we have had before, but only on one ethernet port, here it was all. All internal logging at that site logs 07:53 connection to outer world lost.
As it is now, I need to cluster it, the device is fully unrealiable, that will in itself be a challenge with vrrp and so on, which we never worked with before
very very annoying.
.
Pretty much at the point of using these CCR's for door stops right now - it's no where near 10G ready in terms of real world performance.
