i have Mikrotik SXT , bridged WAN+LAN with 192.168.1.0/24 address.
now i want forward All traffic (like port 80,443) from above range to this ip : 192.168.1.90
i tested some dst nat but not worked
-
-
rayman1366
Frequent Visitor
- Posts: 71
- Joined:
Forwarding All traffic
Hello
i have Mikrotik SXT , bridged WAN+LAN with 192.168.1.0/24 address.
now i want forward All traffic (like port 80,443) from above range to this ip : 192.168.1.90
i tested some dst nat but not worked
i have Mikrotik SXT , bridged WAN+LAN with 192.168.1.0/24 address.
now i want forward All traffic (like port 80,443) from above range to this ip : 192.168.1.90
i tested some dst nat but not worked
-
-
rayman1366
Frequent Visitor
- Posts: 71
- Joined:
Re: Forwarding All traffic
add action=dst-nat chain=dstnat disabled=no dst-address=192.168.1.0/24 dst-port=\
80 protocol=tcp to-addresses=192.168.1.90 to-ports=80
not work
80 protocol=tcp to-addresses=192.168.1.90 to-ports=80
not work
-
-
rayman1366
Frequent Visitor
- Posts: 71
- Joined:
Re: Forwarding All traffic
what about forwarding port 80 ?
i remember before i do it , and it work, but now i dont know what is wrong,
can somebody help me?
i remember before i do it , and it work, but now i dont know what is wrong,
can somebody help me?
Re: Forwarding All traffic
lots of options to you, but my general port forward.
if I need to route an external port to a different internal port
I think maybe where you are getting held up is the dst-address=192.168.1.0/24
Code: Select all
add action=dst-nat chain=dstnat dst-port=80 in-interface=ether1-Gateway protocol=tcp to-addresses=192.168.1.90 Code: Select all
add action=dst-nat chain=dstnat dst-port=8081 in-interface=ether1-Gateway protocol=tcp to-addresses=192.168.1.90 to-ports=80