In addition to the neighbor list not populating after running for a while (the "Refresh" button returns an empty list), when you do run Winbox, sometimes when you close a Terminal window within the Winbox session, the entire session closes.

This is with 3.0rc5, running on Win7.

Please add import from the csv file.

a double click in the sides of the title column could resize column to fit content. like in excel.

No title row on the log screen

I have more than 500 connections and manually add the address book is unrealistic.

winbox 3 rc6 difficult to use, stable, always turn off automatically, or rc5 good, very stable, but I did not save, I do not know now where can be downloaded to.

Hello, where is the 'hide password' feature like in old winbox? Does this v3 has such thing?

Hello, where is the 'hide password' feature like in old winbox? Does this v3 has such thing?

yes
it was moved to settings menu

Doh silly me, thanks

Just want to share something that oddly happened to me while using rc5 the other day on a ccr1009. DNS setting suddenly got deleted and DNS resolution timeout was set to 0.

Caused me a lot of panic... Until I realized that the resolution time was 0!

A suggestion I already told to Sergejs and Normunds (I believe) at the MUM: being able to switch between opened windows inside the same winbox session with some kind of key combo, CTRL-Tab already switches between tabs, something like shift-tab, ctrl-shift-tab or anything not too contorted

Ok so at the moment of accesing tools-profile my winbox sessions instantly closes.. anyone with the same problem?

Ok so now doesn;t matter what i do my session will close instanlty after pressing the connect button.. what the hell

Ok so at the moment of accesing tools-profile my winbox sessions instantly closes.. anyone with the same problem?

Same here

Just want to say, great work guys....salute to MIkrotik staff!

I know it's late in the product cycle, but...

One thing that would make a lot of my work easier is a simple facility (right-click menu option, or whatever) that would do a reverse DNS on a selected IP address.

Hi Guys

Is there a way to speed up winbox, its very sluggish when applying settings or reading firewall rules. It also crashes if the info takes to long to load. It cant be the connection as it does it on all router even it connected directly.

Thanks

I have some problems using Winbox 3.0rc6 with MikroTik 5.26. The MPLS, IPv6 and Routing menus don't show:

I have some problems using Winbox 3.0rc6 with MikroTik 5.26. The MPLS, IPv6 and Routing menus don't show:

Bug has been reported several times -- seems to be tied to router not running ROS v6. Saw it myself today for the first time on newly purchased unit shipped with 5.24 -- wanted to access system routerboard menu to reboot to netinstall, and had to use terminal window to change setting.

Winbox DANGEROUS... Today I was working on a customer and, while the interface page was open tapped the d key. That disabled the highlighted interface. ONE key stroke, no Alt, no Ctl, no other input. In this case it was the wireless interface on a customer CPE and now it is down. I see this a such a fundamental flaw in UI that it is laughable. THIS is Unacceptable.

ONE key stroke, no Alt, no Ctl, no other input.

The "naked key" UI issue (which I believe exists in the production Winbox as well) was fixed (removed) for the Winbox address window in beta 3, but now it sounds like it also exists in other contexts. I was entirely unaware that naked key commands existed in the router window itself. That might explain a number of similar mysterious wireless disablings I have experienced myself (without realizing I may have brushed the keyboard).

RC8 to download:
http://www.mikrotik.com/download/share/winbox.exe

RC8 to download:
http://www.mikrotik.com/download/share/winbox.exe

What happened to RC7? Did I miss something?

Also is there any changelog available for RC8?

Digital Signature

Dear Mikrotik, please sing new Winbox with digital signature, so we can be sure that executable comes from you. It is called Microsoft Authenticode.

Make sure that it is mature signature, not old MD5/SHA1 based. SHA-256 is today's standard for certificates. It is not expensive, especially shouldn't be expensive for you.

You can also do it like Microsoft did: SHA-1 for compatibility with older systems and SHA-256 for newer:



Think also about PGP signature for software relases (download page) - this can be done without any expenses!
Also use mature RSA key length, at least 2048 bits, but 4096 bits would be better (it also doesn't cost you a penny!) and use at least SHA-256.

And the last thing, please attach SHA-256 cheksums for downloads. MD5 is really obsolete for today. Every Linux distribution (and even new Windows, via PowerShell) allows users to calculate such hashes.


Thank you very much for understanding this very important issue.

With the new rc6, keys like E and D do not work, has this been changed ?

Thanks,

http://www.mikrotik.com/download/share/winbox.exe
rc9

With the new rc6, keys like E and D do not work, has this been changed ?

Thanks,

yes, there were bug reports here to disable these keys, since it was too easy to disable and remove interfaces and rules. we will think of a compromise, maybe introduce new shortcuts, like alt+shift+e or something, so that everybody is happy

Good idea. Hope ctrl + c (x, v) will operate normally everywhere within winbox even in telnet window opened from winbox.

I hope it works over RDP ! as the standard D, E were way good and am very much used to them now !

may be introduce something with can change these, depends on what a person likes, ctrl / or direct.

New Winbox beta version has been uploaded to download site:
http://download2.mikrotik.com/routeros/ ... winbox.exe

*) added RoMON support;
*) show default values in CAPSMAN settings;
*) fixed crash when reopening ping or profile window;
*) added advanced mode.

Winbox Rc9 not working here! (windows7 ultimate)

Please try to delete Winbox files.

You can do it by deleting folder: c:/users/xxxx/Application data/Mikrotik

After you delete these files, please try to reconnect.

Remember that if you will delete these files, then sessions and saved addresses also will be deleted. If you need to save them, then export address list to the file and save it into safe place. Also copy out sessions which you will need to use. After you have deleted files and reconnected to router import address list back and put needed sessions back into their folder.

I have the same problem too. But I don't see error it just closes after trying to connect.
I have tried deleting settngs but that doesn't help. Actually mine are here : C:\Users\xxx\AppData\Roaming\Mikrotik.
Also see attached image how it always starts. The size is always that small, it does not remember size when closed even though it remembers being maximised.
P.S. Even though I don't see the error here is what I have in logs :

Faulting application name: winbox.exe, version: 0.0.0.0, time stamp: 0x552d12d0
Faulting module name: ntdll.dll, version: 6.1.7601.18798, time stamp: 0x5507b3e0
Exception code: 0xc0000374
Fault offset: 0x000cea0b
Faulting process id: 0x2a20
Faulting application start time: 0x01d07b613a095c40
Faulting application path: D:\Files\winbox.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 7efb2f5a-e754-11e4-a133-005056c00008

CyberTod - Which version of RouterOS is installed on your router? As for size issue - we will fix it in next rc version.

I have tried on routerboards with v6.28

winbox 3.0rc9 crash in win7 ultimate x64 after clicking "connect"

I have the same problem - Win7 Home Premium.

all my names and groups are lost on the update, how can i get tthem back ? that was a hard work lost !

can we download the rc6 or earlier then 9. i think even 5 was ok.

New Winbox beta version has been uploaded to download site:
http://download2.mikrotik.com/routeros/ ... winbox.exe

*) added RoMON support;

What is "RoMON"

New Winbox beta version has been uploaded to download site:
http://download2.mikrotik.com/routeros/ ... winbox.exe

*) added RoMON support;

What is "RoMON"

http://wiki.mikrotik.com/wiki/Manual:RoMON

What is "RoMON"

Hopefully, someone will describe it in greater detail at the Miami-MUM this week.

New Winbox beta version has been uploaded to download site:
http://download2.mikrotik.com/routeros/ ... winbox.exe

*) added RoMON support;

What is "RoMON"

http://wiki.mikrotik.com/wiki/Manual:RoMON

As usual, the manual offers a thorough description of how the controls work--but not a lot of insight into what the feature does or how it might be useful.

CyberTod, zikachu, kikikaka and Łukasz - Is it possible that winbox has some kind of compatibility configuration enabled or something like that? I have tested at my workplace and at home. All the time Winbox works and connects when used in Windows 7 64 bit.

RoMON stands for "Router Management Overlay Network". This option allows for you to connect to routers after multiple hops in your routed network.

For example, if you have computer 192.168.88.1 and router with address 192.168.88.254 then you always were able to establish direct Winbox connection. Now if you configure RoMON and your router has neighbour which is reachable through address in another subnet, for example 172.16.1.0/24, then now you will be able to connect to this router directly from your computer. All routers in path have to have RoMON enabled and use same secret.

I'm having similar problem to above running under WINE on Ubuntu Linux - window opens small, the 'Autosave', 'Group', 'note' and other fields are missing, and it only shows some columns in the connect database - can re-add them but it doesnt remember them. Sticking to older rc for now as rc9 feels unusable

joegoldman - Go under Tools menu in Winbox loader and switch to Advanced mode. Then all options will be available.

A work around for those experiencing winbox3.0RC9 crash. Check mark "Open in New Window" before click on connect.

A work around for those experiencing winbox3.0RC9 crash. Check mark "Open in New Window" before click on connect.

Thank you. That workaround works. Actually I remember a similar problem with some previous version, but don't remember was it needed to be checked or not.

On the bright side I notice that the initial connect to the router is much faster. Am I the only one with this problem ?

P.S. Another problem - if used from Dude it does not load session settings. If used separately it works fine.

I noticed that on screen shot, which was posted earlier, connection to router is started from Managed tab. We have tried to reproduce this Winbox crash here locally and no luck. Please someone who can not establish connection to router describe what is saved for this specific router in address list (Group, Note, "Keep password", "Secure mode", etc.).

A work around for those experiencing winbox3.0RC9 crash. Check mark "Open in New Window" before click on connect.

For me it works to. Thank You.

@strods
No I don't use any comaptible configuration. I downloaded like a new file, saved as winbox_3.0rc9.exe. I did not use "Check for updates" option in winbox menu.

This new version rc9 is very unstable. Worse than rc6 I tried up to now... Up to an extend I don't even use it anymore... back to old winbox loader (and miss the very useful improvement that ARE made...)

Many times when I want to open a router by its IP it just flash opens to close immediately. Sometimes I have to try several times. Old winbox loader opens without any problems. And if I enable "open winbox in new window" checkbox on a full desktop after a while I have many of these open. Also when you have many sessions running but due some failure connectivity is lost to all they all open a new winbox loader window after reconnecting the closed sessions. I end up with many open winbox loaders on my desktop. Have now to close the ones not in use.

Many times when I click on a setting inside an open winbox session it makes the hole winbox session to close. Open the session again and it works. But this happen so often that is really becomes an irritation.
We have it on several types of routers, on different PC's (all Win8).

One other issue still not solved; When a router disconnects for whatever reason, after a while the 'dead' winbox session also closes. Very inconvenient. Many times when trouble shooting you need to see what the settings in a router were...

Example: When running a wireless scan in a remote (wireless connected) router you can run the scan by running it in the terminal window of the winbox session of that router.
Sometimes links to remote router are very unstable and thus connect regularly or only a 2 or 3 sec scan will make the session survive.
But as long as I can see the result in the terminal I at least can see what the result is.
Now, many times the router closes the session after a second and I loose all the info. It hardly give me enough time to read the outcome. In the old winbox loader this doesn't happen. First is doesn't loose the connection that easy, and when it does at least the window stays open. Move the "winbox session is closed" notification and you can still read all the data.

Now I developed a routine of immediately creating a screendump before the window is lost again. At least I can still read it. And at the end of a day of hard work I have to clean my dropbox screendump archive since its full of screen dumps made that day!
Sorry, but I really can't see the improvement in this......

Another, minor but irritating issue; When you have several winbox sessions open and you are in the process in opening a new one (typing a new IP for instance in the loader) while at that same moment one of the open session is closed, it 'steals' the active window and suddenly you are typing in another loader session than you think you are. But since this is a closed session waiting to be opened again it won't respond you what you typed and you are all getting messed up.
Very irritating behaviour.

This winbox 'tool' is supposed to be a tool to use in troubleshooting networks. Now it seems I am more engaged in troubleshooting the tool itself. ........

tried removing cached files, re-download winbox.exe ...etc... still crash

But the trick "Open in new windows" works.

I remember the 3.0rc2 also crash similarly. It is fixed in rc3 ( or which version... .. i cant remember clearly..)


crash info:

Problem signature:
Problem Event Name: APPCRASH
Application Name: winbox.exe
Application Version: 0.0.0.0
Application Timestamp: 552d12d0
Fault Module Name: StackHash_f821
Fault Module Version: 6.1.7601.18247
Fault Module Timestamp: 521ea8e7
Exception Code: c0000374
Exception Offset: 000ce753
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: f821
Additional Information 2: f821734351f2347e1d6446ab1ffd59a2
Additional Information 3: de5b
Additional Information 4: de5ba675ba9b2c213f8e3b947096a688

Debian 7.8
Wine-1.4.1

In RC9 does not remember selected show columns, window size. :/
does not help remove the user/Mikrotik

joegoldman - Go under Tools menu in Winbox loader and switch to Advanced mode. Then all options will be available.

Beautiful, didn't know that option was there with it turned off by default, that has brought back what I needed though.

It now remembers my window size and columns perfectly.

Thanks

joegoldman, noyo - Simple mode uses only few columns so they are hidden/shown by default. If you use Advanced mode, then you can manage columns as you like.

The advanced mode definitely threw me off too, until I found it under the menus.

Also, it would be nice if the RoMON agent fields were toggle-able-- like "show Romon fields?" in the menu or something. I don't know if I will ever use RoMON so it would be nice to hide it.

Using v3.0rc9 on Win7 x64, I also want to confirm that I can't get Winbox to connect to anything unless I check "open in new window." Unless that is checked, upon clicking connect it just closes Winbox. I deleted all of my preferences under my Roaming folder of AppData, so this isn't an issue of it trying to use old preference files or such.

Something else I've noticed with version 3, going back to rc3 (and maybe before): if I am running a traceroute or ping test through the terminal, this is how it should look:
But if I minimize Winbox, and then go back to the window, this is how it looks:
This is very annoying to me as I run a lot of traceroute/ping tests for a long time to troubleshoot connections, and coming back to the window like that is not a game-stopping thing, but it is pretty annoying.

Keyboard shortcuts are not working in RC9.
For example, the key "and" to enable, "d" to disable any rule does not work.

The advanced mode definitely threw me off too, until I found it under the menus.

Also, it would be nice if the RoMON agent fields were toggle-able-- like "show Romon fields?" in the menu or something. I don't know if I will ever use RoMON so it would be nice to hide it.

Same for me. New features are nice but even nicer if we could easily hide it if we don't want it.

joegoldman, noyo - Simple mode uses only few columns so they are hidden/shown by default. If you use Advanced mode, then you can manage columns as you like.

Advanced mode offers more clutter than I need. Simple mode would be what I would use if it would open with the Notes column visible ( that's where our 65 routers friendly names are kept), and it fully remembered the window size. By the way, even Advanced mode won't re-open to full window height. It's more like 75% (Win 7).

Cheers

When router is rebooted and Winbox 3rc9 offers reconnect, it does not work. Looks like logging is performed but no screen is opened.

When router is rebooted and Winbox 3rc9 offers reconnect, it does not work. Looks like logging is performed but no screen is opened.

I have the same problem

after all trying trying trying... im gettin upset and getting tired.... i have to use my energy to solve the network problems but this stupid winbox take all that energy from me...

if you want advise, use old one and not get angry and no suprises. after soon i hope the mikrotik find the right coders for this small winbox program...

There is no option when you use smips.

Missing Features in new Winbox

These features show up in my routers. Is it possible you neglected to load the ppp and wireless RouterOS packages on that router?

Looks like the new Winbox is not showing those menu items on the older versions of the RouterOS. Anyway to make these backwards compatible? I am seeing the options or our devices that have 6.0 and above.

Dear all,

I can't tell if nobody cares, or nobody have noticed (which I don't believe) that Winbox3 RC does not seem to work properly with ROS 5.26.

Maybe I am the only one experiencig this because I am doing something wrong?

I'm thinking most people are in the "I don't really care" camp. I for one have all my routers with 6.x versions. And if I get a new one that happens to have 5.x, I could always upgrade it via WebFig or FTP or SSH.

There is an error on logon addresses window. When sorting by address is used, it moves the addresses with explicitly written port to the end, so they are not sorted according the address number.

Correction should be made to next RC.

Request for change:

If using the small down arrow in the table header to change the displayed columns, everytime when the column item is selected or deselected, the whole menu disappears and it is necessary to click trhu the whole menu path again if someone wants to make more changes. It is really annoying.

Please, make the column marking menu visible and acceptable to set all marks to the columns that should/should not be visible at once and let it be hidden only when user clicks out of the "show columns" menu.

Thank you.

Hi guys!
You can Tinker with the tray icon? Left icon new RC starting at 6, right Winbox version 3.0rc5
Thank you.

Hi guys!
You can Tinker with the tray icon? Left icon new RC starting at 6, right Winbox version 3.0rc5
Thank you.

right click it, and either "pin" or "unpin" from taskbar. see the difference

Please everyone who is having trouble with missing menus on Winbox try to delete Winbox files.

You can do it by deleting folder: c:/users/xxxx/Application data/Mikrotik

After you delete these files, please try to reconnect.

Remember that if you will delete these files, then sessions and saved addresses also will be deleted. If you need to save them, then export address list to the file and save it into safe place. Also copy out sessions which you will need to use. After you have deleted files and reconnected to router import address list back and put needed sessions back into their folder.

Hi guys!
You can Tinker with the tray icon? Left icon new RC starting at 6, right Winbox version 3.0rc5
Thank you.

right click it, and either "pin" or "unpin" from taskbar. see the difference

Hi!
Thank you helped, but still would like by default

Please everyone who is having trouble with missing menus on Winbox try to delete Winbox files.

You can do it by deleting folder: c:/users/xxxx/Application data/Mikrotik

After you delete these files, please try to reconnect.

Remember that if you will delete these files, then sessions and saved addresses also will be deleted. If you need to save them, then export address list to the file and save it into safe place. Also copy out sessions which you will need to use. After you have deleted files and reconnected to router import address list back and put needed sessions back into their folder.

Not necessary to delete whole folder and to loose the address list. It is enough to delete only the version folder that corresponds to the ros version on the device where problem is observed.

The path written by strods is not correct in some cases. See my experience here:
http://forum.mikrotik.com/viewtopic.php ... 50#p478938

Please everyone who is having trouble with missing menus on Winbox try to delete Winbox files.

You can do it by deleting folder: c:/users/xxxx/Application data/Mikrotik

After you delete these files, please try to reconnect.

Remember that if you will delete these files, then sessions and saved addresses also will be deleted. If you need to save them, then export address list to the file and save it into safe place. Also copy out sessions which you will need to use. After you have deleted files and reconnected to router import address list back and put needed sessions back into their folder.

Tried this many time with every rc version of WB3, but still missing "wireless" menu (and maybe others, but wireless is most important for us) when connecting to any device with ROS 5.x

It is bug introduced in "rc" version, with "beta" version it worked OK.

So now I have to use Winbox2 for 5.x devices and Winbox3 for 6.x devices

Hi! clear winbox password or all fields after login or protect with master pasword.
1. open winbox.
2. input Master passwod
3. get your host,password and login to router.
4. close winbox.
5. open winbox (inccorect - host and password are saved and you can connect). correct- all info clear and it you can get via master password.

I think something like WinSCP with Master password when you want to login..

A work around for those experiencing winbox3.0RC9 crash. Check mark "Open in New Window" before click on connect.

same here,

Problem signature:
Problem Event Name: APPCRASH
Application Name: winbox.exe
Application Version: 0.0.0.0
Application Timestamp: 552d12d0
Fault Module Name: StackHash_bca8
Fault Module Version: 6.1.7601.18229
Fault Module Timestamp: 51fb1072
Exception Code: c0000374
Exception Offset: 000ce753
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: bca8
Additional Information 2: bca8637902933902a49b2f5a8ca2ab42
Additional Information 3: 0c34
Additional Information 4: 0c3434e3fde815f0c5c32e3baf7bf81c

Error in v3 RC9 - incorrectly reporting vrrp state.

Hi,
what about keyboard shortcuts in latest winbox 3.0 for enable (E) and disable (D) on list itmes (interfaces, firewall rules etc.). It seems that this does not work anymore.

Hi,
what about keyboard shortcuts in latest winbox 3.0 for enable (E) and disable (D) on list itmes (interfaces, firewall rules etc.). It seems that this does not work anymore.

I believe a lot of people have been commenting on this, and that I think they disabled these short cuts because a lot of users were accidentally hitting D when they didn't mean to.

The cost of accidental key presses outweighs the ease of a simple one-key shortcut most likely.

Hi,
what about keyboard shortcuts in latest winbox 3.0 for enable (E) and disable (D) on list itmes (interfaces, firewall rules etc.). It seems that this does not work anymore.

I believe a lot of people have been commenting on this, and that I think they disabled these short cuts because a lot of users were accidentally hitting D when they didn't mean to.

The cost of accidental key presses outweighs the ease of a simple one-key shortcut most likely.

Ok, I understand, however where is notice / announcement / release notes about this ?
I believe some shortcuts still can work like "DEL" to delete the item.
Also, winbox could have its own settings (like it has now) and simple checkbox "enable keyboard shortcuts", i believe this is not so hard to implement.

Ok, I understand, however where is notice / announcement / release notes about this ?
I believe some shortcuts still can work like "DEL" to delete the item.
Also, winbox could have its own settings (like it has now) and simple checkbox "enable keyboard shortcuts", i believe this is not so hard to implement.

I think that is the best way to handle this. Shortcuts were disabled because some people complained how easy it is to delete an item, but some people use these shortcuts and rely on them. Just make it an option.

1)
Old DOS shortcuts aren't work, like
SHIFT+INSERT = CTRL+V
CTRL+INSERT = CTRL+C
SHIFT+DELETE = CTRL + X

2)
R.E.D. shotcuts are not active now, please gray it or disable/remove from RMB
e.g. firewall:


3)
A. DEL. C. - Add, Delete, Comment - please not disable it - there are good positive :).

4)
Why This list isn't a scrolled - it's be a that simple.
Why I cannot Select, select and do next select like on/off on sill open one list. Open this and select by one entry is very.. "not optimal" :) Maybe still pressed CTRL should give me switch on/off?


5)
general filters. Good idea be a safe a few common filters as my favorite like "SIPTrunk connection", "FTP". Now I must create this filters again and again, sometimes I must use 7entry in one filter :(. Simple idea for "HTTPS@LAN":


6)
Maybe it's time to create a way to change a RENAME all entry in AdressList. It's always problematic when I must use few scripts to rename names and rename it again into firewall rules. It's be perfect features.


7)
Connection by MAC address is not stable like via IP. Display address with %? Please change into ":".

help me please

Hi There,

Not sure if I am doing something wrong or if this is a bug:
When I create a new device in my CDB file and I apply it to a group, the group part of the config doesnt seem to apply. It also seems that if I try to change the group of an existing device it simply blanks out the group field.

Things I have tried to resolve:
- Cleared my %appdata%\Mikrotik folder
- Tried multiple PCs (same CDB file)
- Tried a with a fresh CDB file

I am using Winbox v3.0rc9
Any assistance would be greatly appreciated

Cheers,
Dave

Not sure if I am doing something wrong or if this is a bug:
When I create a new device in my CDB file and I apply it to a group, the group part of the config doesnt seem to apply. It also seems that if I try to change the group of an existing device it simply blanks out the group field.

In my opinion works OK. e.g. creation and change name of group1 to group2:

1)
Old DOS shortcuts aren't work, like
SHIFT+INSERT = CTRL+V
CTRL+INSERT = CTRL+C
SHIFT+DELETE = CTRL + X

I already mentioned it, but no luck so far. Those other shortcuts are not "old DOS shortcuts" in the obsolete way how it could sound. Those shortcuts are as standard as the more known Ctrl+V/C/X. They worked in every single program I've ever used, even in older WinBox (up to RouterOS 3.x or 4.x) and current WinBox is the only exception. And as could be expected, it's very annoying. The problem is that MikroTik stopped using standard system edit controls, instead created their own and only added support for Ctrl+V/C/X. So once again, please, please, please fix it!

3)
A. DEL. C. - Add, Delete, Comment - please not disable it - there are good positive .

4)
Why This list isn't a scrolled - it's be a that simple.
Why I cannot Select, select and do next select like on/off on sill open one list. Open this and select by one entry is very.. "not optimal" Maybe still pressed CTRL should give me switch on/off?


5)
general filters. Good idea be a safe a few common filters as my favorite like "SIPTrunk connection", "FTP". Now I must create this filters again and again, sometimes I must use 7entry in one filter . Simple idea for "HTTPS@LAN":


6)
Maybe it's time to create a way to change a RENAME all entry in AdressList. It's always problematic when I must use few scripts to rename names and rename it again into firewall rules. It's be perfect features.


7)
Connection by MAC address is not stable like via IP. Display address with %? Please change into ":".

I fully underwrite these points. Special 4 is a long time irritation on the use of winbox. Almost everytime when opening a session I need to open, select, open again, select again etc etc. to get the columns I want. I rarely want the default ones...

It seems that rc9 doesn't save the address list's settings. Comes up w/ address and user, but I have to add the notes field every time I open it. This is really frustrating.

I found a bad TAB "way/road/direction".


Of course work a BACK way by "SHIFT TAB" - OK
Why TAB not stay on "Managed/Neighbors" tab? I found this can be change by "CTRL + TAB".

When I open WinBox v3 then..
"CTRL + F = Find" is not work. I cannot start WinBox and search a proper MTK to open connection.

Workaround:
1) I must click on bottom section of window, address list and CTRL+F is work.
2) Or without mouse: 2x "SHIFT+TAB".

My opinion: CTRL+F should work from any place where a cursor is blinking/located.

We should have this option in v3 too!. I just have problems with reconnection, break a connection etc. and only clear MikroTik folder was help me.

We have finally managed to reproduce Winbox crash when "Connect" button is pressed.

We will fix it in next release.

In my opinion WinBOX v3 is not stable when I connect to v5.26. I must use a WinBox v2 who is stable and works perfect.

First is open a "Error" and after 20sec I see "Could not connect". After pressing any OK button a winbox is closed and I have not any winbox v3 with reconnection...

Winbox RC1 is available. There are lots of changes since beta 3*
http://download2.mikrotik.com/routeros/ ... winbox.exe

Overall highlights of Winbox 3:

Two extremely needed features that would make winbox more productive and convenient:

1. "taskbar" for windows inside winbox. Now bigger windows cover smaller all the time. All admins I talk to are pissed of because of this.

2. searchable, groupable and selectable logs window for gods sake!!! Now we have option to select storage only (all,disk,memory). We need ability to select facility (say I am looking for ipsec logs, or system, or firewall) that contains particular word in it AND within some time frame. Then we need to be able to select lines for copy'ing.

PLEASE, Mikrotik!

When 'Open in new window' is selected a new session is opened instanly, no delay, no wait.
If it is not and the session is opened in the same window there you can see 'Logging in' for 2-3 seconds.
This is on a very fast connection to the board.
Not that it is much delay, but if it can be instant in a new window can't the same be achieved without it ?

I'm thinking most people are in the "I don't really care" camp. I for one have all my routers with 6.x versions. And if I get a new one that happens to have 5.x, I could always upgrade it via WebFig or FTP or SSH.

I must admit that I am pretty much surprised with that approach. It might work fine for someone who jumped to Mikrotik train yesteday, or for someone playing at home with few devices, but if you have installed basis of hundreds of devices in full production, with no reason whatsoever to touch a running system which works fine - it's another story.

If you add problems with Winbox 3, which I simply can't afford, disgracefull bugs appearing in RouterOS 6.x from one update to another ....

If I had not purchased a bunch of hAP's, I would not even consider Winbox 3, and will sure try to avoid it in the near future. I'm still convinced that MiktoTik did not intentionaly made it not to work with RouterOS 5.x or lower.

I'm still convinced that MiktoTik did not intentionaly made it not to work with RouterOS 5.x or lower.

Sure, I agree. But the question was if anyone noticed, or if they did and didn't cared to report it.

I didn't noticed it, as I'm not affected... But you're right, I only have a few MikroTik devices in total, which I upgrade semi-regularly (read: any time there's a change in something that I do use in the setup), leaving all of my devices with different 6.x, and zero 5.x ones.

For people with hundreds of devices, there's also mechanisms for mass upgrades in place... While I understand doing those is always a great risk, there's always the possibility to first upgrade one device (that is like the others in everything - hardware, software, settings), and then if it goes well, do the mass upgrade then.

I dont understand why some network admin refuse to update at least to some 6.xx ros version but claim updating another tools.

Its simply logic updated tools work with updated rOS, even new units come with rOS 6.xx preinstalled, are you doing downgrade then???

I think its a total carelessness to maintain a network with outdated software.

Some can justify on network stability etc etc, but its a lack of logistic and management not be able to get some good practices to apply updates and maintain the network up to date

1. "taskbar" for windows inside winbox. Now bigger windows cover smaller all the time. All admins I talk to are pissed of because of this.

Or at least 'Windows' menu where we can see all open sub-windows and switch between them.

Is it me, or I have many many problems with all versions of Winbox 3 rc

I have many Microsoft Servers (Windows 2008 R2) with Remote Desktop Services. I use to administer many routers connected via Remote Desktop

Winbox 3 fails connecting routers saying it cant create files, and it doesnt remember anything I saved
It tries to create files in the same folder I execute it, b
Perhaps the reason is:

-Windows Session profile folder is "copied" to c:\Users (Until I log off) (from a Network Server)
So, me, as an Administrator, Winbox tries to open files and folders from

c:\Users\administrator\AppData\Roaming\Mikrotik\

But What happens when the Windows Session profile folder is "used" ? (ex: C:\Users\Administrator is used by a previous hanged Session)
Hanged Remote Desktop Profile Sessions folders are very common: Some times when a User log off, some dlls (like printer ones) still remains in memory so windows isnt capable of destroying the Session profile folder completelly.
When the user logs in again: Windows Server addapts itself and create a Windows Session profile folder with Domain suffix

In my case:
For example:

c:\users\Administrator.corp (with the domain)

The problem starts there: Winboxs tries to load files and read folders from c:\users\Administrator and not from
c:\Users\Administrator.corp (the real profile folder)
So winbox cant connect any router (cause it cant download anything)

When will we be getting our hotkeys back in Winbox?
I am talking about the following:
r - remove
d - disable
e - enable

The following still work:
a - accept
c - comment

Been using Winbox for nearly 10 years now, and this frustrates me. As has been suggested in other posts, why isn't there an option to turn it on or off? This cannot be a difficult thing to fix.
I would roll back to an older version of winbox, but then I would get stuck with "corrupted gzip" and the like.

Mikrotik, please fix this.

yes, i also want and option for shortcut keys. its a pitty you remove them.

I dont understand why some network admin refuse to update at least to some 6.xx ros version but claim updating another tools.

Its simply logic updated tools work with updated rOS, even new units come with rOS 6.xx preinstalled, are you doing downgrade then???

I think its a total carelessness to maintain a network with outdated software.

Some can justify on network stability etc etc, but its a lack of logistic and management not be able to get some good practices to apply updates and maintain the network up to date

Well, let me explain why;

1. New purchased routerboards NEVER come with the latest OS. I just recieved a whole bunch of new SXT's and they are all v.5.22. I have never seen units coming with an version OS closer than 2 or 3 away from the last. And by the rate new version are been issued its impossible for sales channels to get their stocks updated.
But of course you can update them when you receive the units. Standard procedure.

2. Immediately updating your production units to the latest OS even if the units run fine on an older OS is not always a good practise. Very often new OS comes with new bugs and issues and that might just bring your network down while with the older OS was doing fine. This forum is full of stories about people upgrading only to find disaster on there path.

I try to keep my network to the latest OS but only after a new OS is tested on new units, than on local units, then on some remote and then, if it all still went well, we implement them on the rest of the network. Because yes, in the end new OS should bring new performances. (And not seldom just the plainly needed reboot revives a unit that was working poorly.)

I dont understand why some network admin refuse to update at least to some 6.xx ros version but claim updating another tools.

Its simply logic updated tools work with updated rOS, even new units come with rOS 6.xx preinstalled, are you doing downgrade then???

I think its a total carelessness to maintain a network with outdated software.

Some can justify on network stability etc etc, but its a lack of logistic and management not be able to get some good practices to apply updates and maintain the network up to date

Well, let me explain why;

1. New purchased routerboards NEVER come with the latest OS. I just recieved a whole bunch of new SXT's and they are all v.5.22. I have never seen units coming with an version OS closer than 2 or 3 away from the last. And by the rate new version are been issued its impossible for sales channels to get their stocks updated.
But of course you can update them when you receive the units. Standard procedure.

2. Immediately updating your production units to the latest OS even if the units run fine on an older OS is not always a good practise. Very often new OS comes with new bugs and issues and that might just bring your network down while with the older OS was doing fine. This forum is full of stories about people upgrading only to find disaster on there path.

I try to keep my network to the latest OS but only after a new OS is tested on new units, than on local units, then on some remote and then, if it all still went well, we implement them on the rest of the network. Because yes, in the end new OS should bring new performances. (And not seldom just the plainly needed reboot revives a unit that was working poorly.)

ok then take 20 versions to properly test reliability of your actual configurations and putting it on production??

my most outdated implementation has 6.19 (upgrading to 6.28 this week), updating software its not a free duty it requires planning testing and proper rolling back planning, but is not impossible.

If the implementation of a network dont take account of maintenance tasks like updating software and maintaining hardware its a incomplete implementation.

In that kind of incomplete implementations maintenance tasks are seen as a issue and a problem because somebody forget to take it in account.

If you click on Tool / Email, it shows you all the predefined server, port, user, and password values. But when you then click on "Send Email," you get a pane in which none of those are filled in, so you have to type them all by hand. There's really no reason not to fill in the defaults from the Email pane.

This is not a new bug in Winbox 3, but it would be nice if it could be fixed while Winbox 3 was open. Thanks.

Hi,
I decided to post my list of bugs/problems related to Winbox 3.0rc9 which bother us:

Crashes

• when I start winbox and try to connect to a station sometimes winbox windows silently disappears without warning or error message (Winbox probably crashes). Usually the second attempt to connect is OK
• when connected to a radio with old ROS (4.x, 5.x) the Winbox 3 rc9 crashes every time (sooner or later). It is near unusable for radios with old ROS
• by clicking some function (menu item) the winbox sometimes crashes („New terminal“ last time). I think you should/could include an exception report dialog box to collect (automatically from internal exception handling) more informations about these problems

UI discomforts/errors

• CR (Enter) not working properly in initial dialog
  Start Winbox, type IP pres <CR> - nothing happen. It should connect (much faster than using mouse to activate the Connect button). Funny thing is that when connection attempt is cancelled using „Cancel“ button and IP edit box is focused the <CR> starts a new connection attempt
• Non-persistent winbox window
  when Winbox loses connection to remote radio it's window disapears silently. Often I have some information in the window I would like to see (just created spectral scans, information from the box I can (re)use - and they can be totally lost because it could happen I can never see them again - lost connection to the radio when something odd happens)
• Blocking file copy
  when a file (new ROS) is being copied to the station using Winbox I cannot access anything on the remote radio. Winbox 2.x allowed this. So I could see some thing I forgot to check before the file transfer was started. I even could inspect cached values when connection was lost and the 'termination confirmation' dialog was shown.
• MAC ping reusing the same window
  Older Winbox allowed to use multiple MAC Ping windows from an AP
• Remembered password problem/confusion
  Winbox 3 doesn't remember the correct password. I use 'Keep password' but often I have to retype the password even if I connect to a radio which has the same password as the one I connected before it. Maybe I didn't understand the sessions or maybe it is not working. The winbox offers often bad (not the last used one) password. Note: We heavily use Winbox started from browser via helper utility which is associated with browser. This way is working (the helper utility sends username and password via command line to winbox). But when winbox is invoked manually it often uses unknown passwords (not the last one used when winbox was started manually last time). Winbox 2.2.18 had no such problem.
• Icons
  allow to disable left menu icons. They are disturbing, non-informative/confusing and space vasting.
• Communication is not send through proper interface
  when you have multiple NICs (even virtual ones) Winbox tends to send the discovery packets (and the communication packets too) through only one interface (often the improper one). I have 2 nics in the PC and some Virtual box related virtual NICs and using the Winbox in this situation is a pain. Even o notebook I have to disable Wifi interface to be able to connect to or discover MT device on ethernet.
  Send the discovery to all interfaces and the communication to proper ones or allow us to select the interface.
• Ethernet Status tab
  This is the one of the most important tabs for ethernet and Winbox3 moved it from the 3rd position in the Interface dialog window to 6th. It looks like it is not problem of Winbox itself but higher ROS versions. If you are not able to create the proper order on the first time then let it be and do not change it in future (when users are used to the order).
• Monitor too small to use winbox
  some config dialogs in some situations are not usable - Ingress vlan translation on 24port CRS for example. There is noway to use Winbox dialog to manage VLANs in this case even on 1920x1200 resolution.
  The solution here could be ranges of interfaces (ether2-ether20 for example). Ranges of interface would simplify CLI settings/reading too.
• ERROR: could not create file
  when connecting to a radio this error appears (rarely). And it is not possible to connect to the radio. Even subsequent attempts fails with the same problem. Give us more information instead of general error message.
• Terminal window problem
  editing commands which don't fit one line tends to cause problems with displaing the line properly.

Wishes

• Get rid of the DLLs downloaded from target box
  replace them by definition files. After it you can create Linux version of Winbox more easily.
• BW test predefined parameters
  IP/test type/tcp connection count/admin/password. It would speed up general connection testing.

Hi,
I decided to post my list of bugs/problems related to Winbox 3.0rc9 which bother us:

Crashes

• when I start winbox and try to connect to a station sometimes winbox windows silently disappears without warning or error message (Winbox probably crashes). Usually the second attempt to connect is OK

I can confirm this.

[*]when connected to a radio with old ROS (4.x, 5.x) the Winbox 3 rc9 crashes every time (sooner or later). It is near unusable for radios with old ROS

Or connected by mac while unit on the desk and in an old version. Meaning new purchased units connect to for 1st time config always disconnect first time. Work around is to inmediately set ip dhcp-cl and use the obtained IP for further login. Otherwise unit keeps quiting....

[*]by clicking some function (menu item) the winbox sometimes crashes („New terminal“ last time). I think you should/could include an exception report dialog box to collect (automatically from internal exception handling) more informations about these problems[/list]

I can confirm this.
Units also disconnect regularly while filetransfer is running. In both mac and ip mode!

UI discomforts/errors

• CR (Enter) not working properly in initial dialog
  Start Winbox, type IP pres <CR> - nothing happen. It should connect (much faster than using mouse to activate the Connect button). Funny thing is that when connection attempt is cancelled using „Cancel“ button and IP edit box is focused the <CR> starts a new connection attempt
• Non-persistent winbox window
  when Winbox loses connection to remote radio it's window disapears silently. Often I have some information in the window I would like to see (just created spectral scans, information from the box I can (re)use - and they can be totally lost because it could happen I can never see them again - lost connection to the radio when something odd happens)

Complained about this some version ago. Very, VERY, inconveniant. Because indeed at times the 'old' window contains still readable info. Now it just got lost.....

[*]Blocking file copy
when a file (new ROS) is being copied to the station using Winbox I cannot access anything on the remote radio. Winbox 2.x allowed this. So I could see some thing I forgot to check before the file transfer was started. I even could inspect cached values when connection was lost and the 'termination confirmation' dialog was shown.

Confrimed. And annoying. Now you have to wait untill upload is finished. In the meantime cannot do anything in winbox session. Not even move the windows because in the meantime I want to read some info.. very inconveniant

[*]MAC ping reusing the same window
Older Winbox allowed to use multiple MAC Ping windows from an AP
[*]Remembered password problem/confusion
Winbox 3 doesn't remember the correct password. I use 'Keep password' but often I have to retype the password even if I connect to a radio which has the same password as the one I connected before it. Maybe I didn't understand the sessions or maybe it is not working. The winbox offers often bad (not the last used one) password. Note: We heavily use Winbox started from browser via helper utility which is associated with browser. This way is working (the helper utility sends username and password via command line to winbox). But when winbox is invoked manually it often uses unknown passwords (not the last one used when winbox was started manually last time). Winbox 2.2.18 had no such problem.
[*]Icons
allow to disable left menu icons. They are disturbing, non-informative/confusing and space vasting.

+1

[*]Communication is not send through proper interface
when you have multiple NICs (even virtual ones) Winbox tends to send the discovery packets (and the communication packets too) through only one interface (often the improper one). I have 2 nics in the PC and some Virtual box related virtual NICs and using the Winbox in this situation is a pain. Even o notebook I have to disable Wifi interface to be able to connect to or discover MT device on ethernet.
Send the discovery to all interfaces and the communication to proper ones or allow us to select the interface.
[*]Ethernet Status tab
This is the one of the most important tabs for ethernet and Winbox3 moved it from the 3rd position in the Interface dialog window to 6th. It looks like it is not problem of Winbox itself but higher ROS versions. If you are not able to create the proper order on the first time then let it be and do not change it in future (when users are used to the order).

Fully support this opinion!

[*]Monitor too small to use winbox
some config dialogs in some situations are not usable - Ingress vlan translation on 24port CRS for example. There is noway to use Winbox dialog to manage VLANs in this case even on 1920x1200 resolution.
The solution here could be ranges of interfaces (ether2-ether20 for example). Ranges of interface would simplify CLI settings/reading too.
[*]ERROR: could not create file
when connecting to a radio this error appears (rarely). And it is not possible to connect to the radio. Even subsequent attempts fails with the same problem. Give us more information instead of general error message.
[*]Terminal window problem
editing commands which don't fit one line tends to cause problems with displaing the line properly.[/list]

Indeed

Wishes

• Get rid of the DLLs downloaded from target box
  replace them by definition files. After it you can create Linux version of Winbox more easily.
• BW test predefined parameters
  IP/test type/tcp connection count/admin/password. It would speed up general connection testing.

Allthough the new winbox has some improvements compared to the old versions these are hardly enough to choose it over the old vesion due all the new imperfections introduced compared with lots of 'old' irritations still not been touched.
When a new winbox version is to be made it should do much better and the developments should also go faster. Its now already going for months, longer than most of the software upgrades take to see the light!

dada++
WirelessRudy++

At the moment, even with all the new features and improvements to Winbox 3, it's pretty much useless in production environments.

For home use, where most users will login once every year to their router might be ok.

But for professionals managing tens of Mikrotik installations everyday all the new features are not enough to give up on the perfectly usable and stable Winbox v2.


A true upgrade to v3 would be to keep the workflow intact while introducing new features (and NOT bugs).
Right now it's really annoying to use having to learn new ways to do things (fast).

At the moment, even with all the new features and improvements to Winbox 3, it's pretty much useless in production environments.

Especially when MikroTik keeps advising that we have to upgrade to ROS 6.28 to solve many of the Winbox problems we are reporting. You can't just upgrade a production network like that.

dada +
WirelessRudy +
and more... in my opinion WinBox v3 should be BETA with many, many new release before we can speak about RC. MikroTik, why you lost a numbering like x.y.z, this was a good ideology.

Today little GUI bug:
When we move up and down the WinBox v3 list then last entry is cut. Pressing "v" correct the position but now on the top we have this a entry cut...

Sometimes you are just trying to figure out what happened by digging through the log. But there is so much info and specially when you want a quick look into when and how many times something happened it would be nice if you can just temporarily 'select' parts of the text. Would be even better if we than also could copy and paste it somewhere else for further study.

Last version rc9 crashes on Windows Server 2008 R2 and some desktops on Windows 7

I saw it tries to download plugin and when crashes



And I have to use it with hAP lite... and no way...

Can somebody tell me why appears the new line of products on smips without quality support?!

I mean my post upper.

Because it is the way how mikrotik does things.

Because it is the way how mikrotik does things.

ahahahaaaa!!!

Yeah. Funny enough. The life would be so gray without these easter eggs we are finding each day. I am just trying to handle it somehow, because even it brings those bad things, there is no better option for me.

Make the log a rich text file that can be easily exported for further analysis if one needs.

rc10 fixes crash

rc10 fixes crash

Thank you very much

And another bug. Now, after each connecting to any router creates tmp file in same directory where winbox.exe exists:

viw83DD.tmp
viwD151.tmp

etc...

rc10 fixes crash

Part of the upgraded from listed in the Winbox3.0rc9 was RB no longer see.
# No output list

What's new in v3.0rc10:

*) remember first window size;
*) fixed crash when trying to connect to the router;
*) fixed connecting by mac addresses on Windows with multiple network cards (needs at least RouterOS v6.29 on the router as well);
*) added back keyboard shortcuts for tables (INS for add, DEL for remove and all other with Ctrl prefixes);
*) added support for Shift+Ins, Ctrl+Ins, Shift+Del shortcuts in text entry fields;
*) fixed crash when connecting to v5 routers;
*) fixed problem where group column contents were not shown;

rc9 crash...
Just tested RC10, crash problem is fixed . Seems ok so far.

Hello! I decided to try new WinBox 3 (RC9) few days ago - I like the session feature. But I had some troubles with Safe Mode - is it working correctly? I had turned on Safe Mode, made some changes, lost connection. I reconnected back, but there was the old session in the Active Users list and I was not able to start new Safe Mode.

What's new in v3.0rc10:
*) fixed problem where group column contents were not shown;

It also changed the way the list is sorted by group. Previously, when I sorted by group, it would group the entries by the entire group name (e.g., Central, Central CPE, City-E, City-S, City-W, etc.). Now it groups the entries by first letter only, throwing all the Cs into the same group. I much preferred the previous behavior.

Hello! I decided to try new WinBox 3 (RC9) few days ago - I like the session feature. But I had some troubles with Safe Mode - is it working correctly? I had turned on Safe Mode, made some changes, lost connection. I reconnected back, but there was the old session in the Active Users list and I was not able to start new Safe Mode.

If you lose connection during Safe Mode, manage to reconnect before the Safe Mode times out, and ask for Safe Mode again, you will always be told that someone else owns Safe Mode. This is not new with Winbox 3. You have always had to bring up a Terminal window, request Safe Mode there, and choose whether you want the old Safe Mode changes to be rolled back or not.

If you lose connection during Safe Mode, manage to reconnect before the Safe Mode times out, and ask for Safe Mode again, you will always be told that someone else owns Safe Mode. This is not new with Winbox 3. You have always had to bring up a Terminal window, request Safe Mode there, and choose whether you want the old Safe Mode changes to be rolled back or not.

Thank you for information! I didn't know about this - I barely used Safe mode before...

Bug: If you choose two routers that have the same default session file, and click "Connect to all," one opens up with the proper session windows, and the other opens up to a blank gray window.

Autosave Session and Open in New Window are both checked.

This is true in at least rc9 and rc10.

And again sessions are not used when opened from within Dude.

When I select IP > webproxy > access then winbox closed

winbox 3.0rc10 is now creating a folder instead of a data file of the 1.1.1.1.viw.
I am using Linux with wine.

Same on Windows....no session state saving.

Small investigation for Winbox 3.0 rc10 on Windows:
- In the Session folder creates a folder "<ip>%<port>.viw" (Session="own")
- If Menu/Sessions/Autosave on Close is turned on, then when you close the program in Winbox's folder "viw<number>.tmp" file is created. After each run, there is one additional file.

upgraded to ROS 6.29.1 to fix the problem where some CRS could not be reached (introduced in v6.29);

This problem still happens with Winbox RC10 even after I cleared cache and tmp files. Winbox RC9 does not have this problem.

We have reproduced this issue where .tmp files are being created. We will fix it in next release.

The C button no longer works for me to set comments in RC10.

Is this also happening for others?

The C button no longer works for me to set comments in RC10.

Is this also happening for others?

It was announced before somewhere, that single letter shortcuts are removed, because there was a risk of accidentaly removing, disabling, etc. We will add shift or something to these keys

in rc 10 last settings are not save. I have to manually add ip address turn on the advance mode. It was fine in rc9. Running on wine. Connect to field is always empty

It was announced before somewhere, that single letter shortcuts are removed, because there was a risk of accidentaly removing, disabling, etc. We will add shift or something to these keys

Yes, I read that and I understand why that was done for remove/disable etc.

But comment was not mentioned.
Comment is a benign function, and removing the shortcut seriously impacts work-flow.

It was announced before somewhere, that single letter shortcuts are removed, because there was a risk of accidentaly removing, disabling, etc. We will add shift or something to these keys

Yes, I read that and I understand why that was done for remove/disable etc.

But comment was not mentioned.
Comment is a benign function, and removing the shortcut seriously impacts work-flow.

ok, we will figure something out. I guess when the programmers removed the shortcuts, they removed all, and will return all as well.

http://xkcd.com/1172/

Sometimes during the day i connect to romon devices nicely, other times i get the message disconnected from romon. I dont know if its a winbox issue or ros. By the way very nice feature!

shortcuts are already back in rc10:

Thank you for the updates and bug fixes
Are there any plans to make this new version fully compatible with the older ROS versions?
Any version prior to 6.0 has missing menu options.

Yes I know they should be brought up to the current ROS, which we are doing slowly but surely.
The issue is replacing hardware among other things to consider and it would be great to be able to use 1 version of Winbox to access all of our devices.

Thanks

Please preserve the checked boxes in "Torch" from one session to another.

-tp

Delete the Winbox folder if you have missing menu items. It has cached some menu layout there. Clear the foler and relaunch to fix this.

Delete the Winbox folder if you have missing menu items. It has cached some menu layout there. Clear the foler and relaunch to fix this.

This does not resolve the issue, Winbox 3 is not completely compatible with ROS version below 6.0, I am not the only one having this issue.
For trouble shooting purposes I did it again and still the same issue.

The C button no longer works for me to set comments in RC10.

Is this also happening for others?

It was announced before somewhere, that single letter shortcuts are removed, because there was a risk of accidentaly removing, disabling, etc. We will add shift or something to these keys

Not being able to C for comments is driving me insane! I hope this comes back soon.

Maybe just have dual-key shortcuts for dangerous commands like remove/disable/enable

What's new in v3.0rc11:

*) fixed session saving;
*) move cursror to password or login field when host is selected in address list or in neighbors

Accidenatly "Debug window" was enabled.
Simply re-download Winbox.exe from our download page. Problem gone

The C button no longer works for me to set comments in RC10.

Is this also happening for others?

It was announced before somewhere, that single letter shortcuts are removed, because there was a risk of accidentaly removing, disabling, etc. We will add shift or something to these keys

Not being able to C for comments is driving me insane! I hope this comes back soon.

Maybe just have dual-key shortcuts for dangerous commands like remove/disable/enable

Right click in the list window to see the shortcuts, they are already made

However, my mail was not wasted. Have added advanced mode. thanks, a good move

In rc11 still when opened from Dude sessions are not loaded. Working fine with rc6

In rc11 still when opened from Dude sessions are not loaded. Working fine with rc6

make sure to delete the winbox files (viw and others), then try again

In rc11 still when opened from Dude sessions are not loaded. Working fine with rc6

make sure to delete the winbox files (viw and others), then try again

But that will delete all my remembered sessions. They load fine if I just open winbox.exe from explorer, but if I open it like a tool from dude with command : winbox.exe [Device.FirstAddress] [Device.UserName] [Device.Password] - no session is loaded.

RoMON does not work in the RC11 and ROS 6.29.1

Yesterday rc11. Today rc12

What's new in v3.0rc12:
*) added "clear cache" command to Tools menu;

Yesterday rc11. Today rc12

What's new in v3.0rc12:
*) added "clear cache" command to Tools menu;

very good!

Ran 3.0rc12 for the first time, opened a session. Clicked 'X' to close session window and got the error message:

"Unable to create the folder 'sessions\'. The system cannot find the path specified."

Ran 3.0rc12 for the first time, opened a session. Clicked 'X' to close session window and got the error message:

"Unable to create the folder 'sessions\'. The system cannot find the path specified."

Try the new "clear cache" button. Also, do you use Windows and a standard path?

WinBox 3rc12 crashes when trying to create virtual ethernet on hap lite 6.29.1

Problem :
in ipsec Policy cannot be change vale of priority to 0 or 1 (use winbox )
from ver 6.27 to 6.29.1 i tested
in terminal it works fine

On devices with POE-out ports, any chance of getting a new "POE" pane in the window for the POE-in port to allow us to set ether1-poe-in-long-cable from Winbox?

On devices with POE-out ports, any chance of getting a new "POE" pane in the window for the POE-in port to allow us to set ether1-poe-in-long-cable from Winbox?

Yeah! This is the only way I got my RB750up to stop port flapping. I had poe-out port flapping on v6.18/19 a few times a day/week, so thought it was time to update to the latest 6.29.1 , what a mistake, port flapped all night, every 10-15 mins. Much worse, and all my cables are super short. As soon as i set poe-in long cable, stopped immediately. What's more, it used to port flap every time i logged in with webfig and winbox, and i certainly could not leave them running on-screen. Now i can leave them running on-screen all day...

Oh, and here's a screen shot of an interesting session of port flapping, so you can't tell me it's not the device's fault when it's doing it on-the-hour! I've seen similar patterns before. It's software {possibly hardware?} for sure, not something else attached:

[img][/img]

When will we be getting our hotkeys back in Winbox?
I am talking about the following:
r - remove
d - disable
e - enable

The following still work:
a - accept
c - comment

Been using Winbox for nearly 10 years now, and this frustrates me. As has been suggested in other posts, why isn't there an option to turn it on or off? This cannot be a difficult thing to fix.
I would roll back to an older version of winbox, but then I would get stuck with "corrupted gzip" and the like.

Mikrotik, please fix this.

This would be great BUT please, add an function to enable/disable this feature in winbox settings.

I got kids ans cats....

When will we be getting our hotkeys back in Winbox?
I am talking about the following:
r - remove
d - disable
e - enable

The following still work:
a - accept
c - comment

Been using Winbox for nearly 10 years now, and this frustrates me. As has been suggested in other posts, why isn't there an option to turn it on or off? This cannot be a difficult thing to fix.
I would roll back to an older version of winbox, but then I would get stuck with "corrupted gzip" and the like.

Mikrotik, please fix this.

This would be great BUT please, add an function to enable/disable this feature in winbox settings.

I got kids ans cats....

It is already returned, and the key shortcuts are different now - right click the firewall list to see the shortcuts. They are no longer single keys, and are kid/cat-proof

"Unable to create the folder 'sessions\'. The system cannot find the path specified."

Try the new "clear cache" button. Also, do you use Windows and a standard path?

Still get the same error and yes, standard Windows paths.

Just move your session folder to existing location and all will be fixed. Atm you probably somehow deleted in in windows user files, and winbox doesn't have permisions to create anything there.

Just move your session folder to existing location and all will be fixed.

No session folder anywhere in sight. Winbox 3.0rc9 continues to work correctly in this regard.

Atm you probably somehow deleted in in windows user files, and winbox doesn't have permisions to create anything there.

Nope. Not deleted anything.

Yesterday rc11. Today rc12

What's new in v3.0rc12:
*) added "clear cache" command to Tools menu;

I am using Winbox v3.0rc12 and am receiving the following error when attempting to connect to any routerboards I have, versions varied from 5.22 up to 6.28:

The procedure entry point ucrtbase.abort could not be located in the dynamic link library api-ms-win-crt-runtime-l1-1-0.dll

The error comes up 3 times and then Winbox connects, but the connection is flaky and I am having to reconnect.


I have a fresh install of Windows 7 Pro. I have .Net 4.5.2 installed with all available Windows updates. Do you require any other information from me?

--
BBSing is a terminal disease and I have the ANSI strain.

About RoMON.
I've added a gateway host - I can connect to it with plain winbox.
I've enabled RoMON on a switch behind it and on the gateway. I can discover both from eachother. When I click "connect to RoMON" button, it connects, I can discover the switch.
Now here is the problem:
When I'm connected with RoMON, all the Managed list is gone. Ok I've manually added the switch by MAC address to the list after connecting with RoMON. When I click that host from the list and click connect (all when connected through RoMON) the new window opens, flashes briefly and I see the connect window with a message that "*host* has beed disconnected xx:xx:xx: ago".
I click reconnect and it works.

Ok. I see that I can specify a RoMON agent - with a hostname. From an unordered list. And it seems that it does not work. It says wrong password, thou I'm not sure what host exactly and with what credentials I am connecting to RoMON. Or is the password wrong on the RoMON or the target host..

Seriously, You guys have to think things through, plan, and test. More. And document.

It appears that somewhere around RC10 that SwitchOS devices are no longer able to be discovered. They still can be scene with the discovery tool on 2.2.18 but not with 3.0 rc12. The first time I noticed this was with RC10.

Winbox working folder should be the same folder winbox.exe exist so it could be portable. I login to customer routers from different pc and places and i have to make every time new viw files the way i want. Why it is in windows user folder?
In the same folder all ini and viw files even this is a usb stick or desktop folder

Winbox working folder should be the same folder winbox.exe exist so it could be portable. I login to customer routers from different pc and places and i have to make every time new viw files the way i want. Why should it be in windows user folder? In the same folder all ini and viw files !

This is set in preferences. You can choose another folder, even the same one.
Tools -> Move Sessions folder

i know that. i mean that it should choose by default the path that i am running winbox.exe.
if i have a folder on my flash drive in root ...\winbox everything should be placed there and not in %appdata%

i know that. i mean that it should choose by default the path that i am running winbox.exe.
if i have a folder on my flash drive in root ...\winbox everything should be placed there and not in %appdata%

How can it know where you want it? Just set the folder once, and Winbox will remember it.

i know that. i mean that it should choose by default the path that i am running winbox.exe.
if i have a folder on my flash drive in root ...\winbox everything should be placed there and not in %appdata%

How can it know where you want it? Just set the folder once, and Winbox will remember it.

I think he is suggesting winbox should store all files in the same folder where the winbox.exe was found, so that when he moves a flash drive from one machine to the next, he doesn't have to guess what drive letter the next machine will assign to it.

he doesn't have to guess what drive letter the next machine will assign to it.

Usually applications store preferences in localsettings folder. I don't know of many tools that have a Folder next to them.
The only way we could solve this, is to have a "Preferences" window for Winbox, and then you could have a checkbox "Store settings next to Winbox" which would grey out the "Move sessions folder" button

Winbox is getting too complicated

I think he is suggesting winbox should store all files in the same folder where the winbox.exe was found,

this is what i am suggesting, so everywhere i go around places i plug my usb run winbox and every setting and viw the lastime i had in my routers should be there.
look in the picture below! this is an example of what i mean
"sessionpath" or "path" file of course is not needed as it will be the current folder of winbox

I think he is suggesting winbox should store all files in the same folder where the winbox.exe was found

this is what i am suggesting, so everywhere i go around places i plug my usb run winbox and every setting and viw the lastime i had in my routers should be there.
look in the picture below! this is an example of what i mean
"sessionpath" or "path" file of course is not needed as it will be the current folder of winbox

I wonder what would happen if you set the folder to "."?

I'd like to +1 the idea for total mobility with Winbox. I've been searching for a way to have my sessions and "managed" routers sync between work desktop, laptop, and home desktop as well.

Couldn't you just move the Addresses.cdb file into the "sessions folder" too? That would solve the problem for me as I'm just using dropbox to sync that folder.



-Joshua
Fourway.NET

I am writing again about a problem, but with some updates :

When using winbox v3.0rc7+ as a tool from Dude sessions are not loaded. Actually it does not read them from the session folder, but expects to find them in C:\. When exiting it saves the session changes to C:\. So it becomes very inconsistent when using winbox both from Dude and separately.
And you may say that the easiest thing to do is just move the session folder to C:\ and all is fine. Yes it is and it will work, but then my root system folder will have hundreds of files and will be a bit messy.

It appears that somewhere around RC10 that SwitchOS devices are no longer able to be discovered. They still can be scene with the discovery tool on 2.2.18 but not with 3.0 rc12. The first time I noticed this was with RC10.

I have confirmed a similar problem with 3.0 rc12. I just netinstalled a shipment of a half dozen new mAP and hAP units. After I netinstall either out of the box, Winbox sees it no problem (except for one of the hAPs, which never showed up at any time). Once I load my generic configuration onto it, Winbox won't pick it up anymore unless you type the MAC address manually. An old copy of "MikroTik Neighbor Viewer" (that I've had for four years and use very rarely) picks the device up immediately, every time, but Winbox rc12 just sits there, blank I ran a ten-minute session on one of the mAPs and Winbox never showed it as a neighbor until I shut it down and logged out -- then suddenly it appeared.

It's not a firewall problem, because I don't load any firewall rules, NAT, or anything else. Each of our mAPs and hAPs is configured as just a dumb AP bridge (switch chip bridging the ethernets, added to software bridge for the wireless) with a single IP address, which is pretty simple.

Winbox 3.0 really does have neighbor protocol problems.

dada +
WirelessRudy +
and more... in my opinion WinBox v3 should be BETA with many, many new release before we can speak about RC. MikroTik, why you lost a numbering like x.y.z, this was a good ideology.

Today little GUI bug:
When we move up and down the WinBox v3 list then last entry is cut. Pressing "v" correct the position but now on the top we have this a entry cut...

Noticed the same, very irritating...

On devices with POE-out ports, any chance of getting a new "POE" pane in the window for the POE-in port to allow us to set ether1-poe-in-long-cable from Winbox?

I have to set the long cable by default. Even on 2 or 3 units attached with 1 mtrs pre-fab cat5e or 6 cable (shielded and or not) and even sometimes it works for a couple of days, after a while units can't be powered up anymore by the rb750. It makes the whole 750 to start flipping. Only setting the long cable option make it work again. We use it by default now because its the only way to get a reliable PoE device at remote site......

Installed loader v.3.0rc12 this weekend and since can't open any new router anymore that has basic factory setting.
I have to open it with old loader first, upgrade the routerboard and only after that the discovery tool will find it.

Then, mac sessions to routers on my desk are very unstable. I have quickly to set a dhcp-client on the board so it picksup a IP from my server and than login by IP. Otherwise it's a matter of less than a minute before board disconnects.
Sometimes boards just don't connect by mac. I can try many times and board comes up to close inmediately.

Old winbox doesn't have any of these issues. It just does do what it is suppose to do, open a board. Either by mac or by IP if is has one....
I've got the feeling each new loader's update brings new issues... its almost lika ROS procedures! Disregard the first 20 or so versions because they give you more headaches than it solves......

I think the website should still have the old v2. loader version as first choice. Not this unstable release candidate.
At times you are out in the field without a laptop so use the client's device. Need to download winbox and get this unstable version... I wan't the 'old' stable one...

What version of winbox do your devices offer on their login page?

What version of winbox do your devices offer on their login page?

I don't understand your question? I login with winbox loader. "Login page"? If you mean the webpage of the building webserver? Never use that....

The bottom line is; when I take a new router out of the box (so factory default) I can't open it with the new winbox. If this is what MT thinks of improving winbox I think they lost directions....

The bottom line is; when I take a new router out of the box (so factory default) I can't open it with the new winbox. If this is what MT thinks of improving winbox I think they lost directions....

If you leave 3.0rc12 open long enough (on the order of a minute or two), it will eventually display the factory-default RB.

I consider this just slightly less painful than entering the MAC address manually.

The bottom line is; when I take a new router out of the box (so factory default) I can't open it with the new winbox. If this is what MT thinks of improving winbox I think they lost directions....

If you leave 3.0rc12 open long enough (on the order of a minute or two), it will eventually display the factory-default RB.

I consider this just slightly less painful than entering the MAC address manually.

Well, tried that, but on some units after 5 mins still nothing happened. And some indeed after a longgggg time connected.
I use now the 'old' loader to find and open de board the first time. After I've set a dhcp-client I take the IP and go from there with the new loader. After upgrade to latest ROS the new loader 'sees' the board....

But far from an improvement......

I just wanted to say that the webpage of each (excluding smips) device offers the winbox v. 2. There is no need to search for it elsewhere. I am using v.3rc12 for some time already having no problems with any new or old devices. Just once it didn't detetect the new neighbour device. So I opened other neighbouring device, use look at its neighbours, copy the mac and put it into winbox 3rc12.
Maybe the explore delay could be caused by more than one network interfaces of winbox running computer connected to the same network as it is definitely my case.

Aside from portability/sync support for my saved sessions, I'd love to see the title bar show the router identity first, then the user@ip so that I can more easily tell which session is which in my taskbar when I have 5+ open!

Please add the export and import addresses from a CSV (Tool>Import,Export)

I just wanted to say that the webpage of each (excluding smips) device offers the winbox v. 2. There is no need to search for it elsewhere.

That's no help. New routerboards come by default with another network than we use. So as long as I didn't change the IP of the interfaces to be in my network I can't open any webpage. The whole fun of winbox loader used to be we have access to routers independed if its in an IP network or not. But that advance use compared to other that have IP-level access only is now gone.
The big 'love' for winbox loader by many was that no matter what network issue you had, you could always login to a router with winbox loader, even without knowing its IP or network it was set for. Now we are losing this advance...

I am using v.3rc12 for some time already having no problems with any new or old devices. Just once it didn't detetect the new neighbour device. So I opened other neighbouring device, use look at its neighbours, copy the mac and put it into winbox 3rc12.

The 'old' loader never had such issues. Why should we now have to find work arounds on a new upgraded version?

Maybe the explore delay could be caused by more than one network interfaces of winbox running computer connected to the same network as it is definitely my case.

No. It happens on all of our 7 different office PC's. None of them have more than one interface. But yes, they are all in one network. But again, 'old' loader has no issues.

WirelessRudy,
what is the problem with saving a winbox.exe from one of your router to your computer local disk and use it whenever you want?

I have not lost any advance with 3rc12. There is no limitation to use Layer3 only, the Layer2 works also normally like always. In case I need, I still can run v2.2.18. Both are locally stored on my disk...