Community discussions

MikroTik App
 
jskuk
just joined
Topic Author
Posts: 1
Joined: Thu Mar 06, 2014 11:26 pm

Apple Tv problem!

Thu Mar 06, 2014 11:52 pm

I have a small problem whith my appletv. When i hook it up to my 951G-2HnD on Ethernetcable I just dont seem to get it to work properly. It´s slow and has horrible videoquality but connected to wifi it works just fine streaming Netflix and rentals all in perfect HD quality.
I tried different cables whith no success. Tried whith my old Linksysrouter and it worked perfekt as well.
Thankful for any new lead i could get! :D
 
daysleeper
just joined
Posts: 3
Joined: Tue Jul 15, 2014 8:38 pm

Re: Apple Tv problem!

Tue Jul 15, 2014 8:42 pm

I have exactly the same issue, AppleTV works fine on WiFi and very slow on eth.
Did you find any resolution?
 
daysleeper
just joined
Posts: 3
Joined: Tue Jul 15, 2014 8:38 pm

Re: Apple Tv problem!

Tue Jul 15, 2014 8:46 pm

I have exactly the same issue. AppleTV works fine on WiFi and very slow on eth.
Did you find any resolution?
 
User avatar
pekr
Member Candidate
Member Candidate
Posts: 170
Joined: Tue Feb 22, 2005 9:05 pm
Location: Czech Republic
Contact:

Re: Apple Tv problem!

Mon Aug 18, 2014 3:52 pm

Right now at our client home, I can confirm identical syndrome - no matter how we try, AppleTV box does not work over ethernet, but does just fine via wi-fi.

Had anyone find out, what could be the cause? TV works, PC works, but AppleTV does not work. Etherned port are put into switch mode ...
 
WTNL
just joined
Posts: 2
Joined: Tue Aug 05, 2014 10:57 am

Re: Apple Tv problem!

Mon Aug 18, 2014 6:42 pm

I don't know if this can be helpful but I have no problem with Apple TV (ATV3). Though this is with a RB2011UiAS-2HnD and I'm using bridge mode.
 
User avatar
pekr
Member Candidate
Member Candidate
Posts: 170
Joined: Tue Feb 22, 2005 9:05 pm
Location: Czech Republic
Contact:

Re: Apple Tv problem!

Tue Aug 19, 2014 11:59 am

We have tried independent Ethernet, ethernet being put into switch, bridge. As far as AppleTV is connected to the ethernet port, it does not work, well, maybe it works, but at mediocre speeds. Our RB is RB951G-2HnD, latest 6.18 firmware ...
 
eltoozero
just joined
Posts: 15
Joined: Fri Jun 27, 2014 5:16 am

Re: Apple Tv problem!

Wed Sep 17, 2014 9:15 am

Tried whith my old Linksysrouter and it worked perfekt as well.
Thankful for any new lead i could get! :D
I have the same model, my first MikroTik and it's blown me away except for this seriously annoying problem.

Set multicast-helper to full on the wireless interface and you should be good to go.
/interface wireless> set 0 multicast-helper=full
Related thread here.
 
ksmrnv
just joined
Posts: 9
Joined: Sun May 17, 2015 11:05 am

Re: Apple Tv problem!

Sun May 17, 2015 11:19 am

I have same trouble too.

ATV3 connected directly to ethernet port 951G-2HnD, and when I try to play something from iTunes using Internet connection, or from my PC via iTunes Home Sharing, ATV begin buffering infinitely.
But if i connect ATV to 951G-2HnD via wifi, everything works fine.
Have changed a lot of length and type of patch-cords.

Anyone have solution?
 
ksmrnv
just joined
Posts: 9
Joined: Sun May 17, 2015 11:05 am

Re: Apple Tv problem!

Mon May 18, 2015 3:25 pm

I found temporary workaround!
I have connected ATV to my Mikrotik via dumb unmanaged 5-port Gigabit switch (TP-Link).
Problem has disappeared. Any ideas why?
 
eltoozero
just joined
Posts: 15
Joined: Fri Jun 27, 2014 5:16 am

Re: Apple Tv problem!

Mon May 18, 2015 11:58 pm

I found temporary workaround!
I have connected ATV to my Mikrotik via dumb unmanaged 5-port Gigabit switch (TP-Link).
Problem has disappeared. Any ideas why?
Did you try setting the multicast-helper option as I posted directly above your reply?
 
User avatar
Nollitik
Member Candidate
Member Candidate
Posts: 257
Joined: Tue Dec 07, 2010 8:16 am

Re: Apple Tv problem!

Tue May 19, 2015 12:03 am

Not sure what problems folks are having. I have the RB450G that connects two Apple TV's...Apple TV1 and Apple TV3 via a gigabit switch and cat7 Ethernet cables for two years...streaming Netflix, never a problem.
 
eltoozero
just joined
Posts: 15
Joined: Fri Jun 27, 2014 5:16 am

Re: Apple Tv problem!

Tue May 19, 2015 12:07 am

Not sure what problems folks are having. I have the RB450G that connects two Apple TV's...Apple TV1 and Apple TV3 via a gigabit switch and cat7 Ethernet cables for two years...streaming Netflix, never a problem.
The issue is (was) specifically with excessive buffering when attempting to AirPlay YouTube to an AppleTV; after starting the connection it would take up to a minute for the video to start playing.

It was happening to me on both ATV3 and ATV2 before setting multicast-helper to full on the wireless interface of the RB951Ui-2HnD.
 
ksmrnv
just joined
Posts: 9
Joined: Sun May 17, 2015 11:05 am

Re: Apple Tv problem!

Tue May 19, 2015 9:08 am

I found temporary workaround!
I have connected ATV to my Mikrotik via dumb unmanaged 5-port Gigabit switch (TP-Link).
Problem has disappeared. Any ideas why?
Did you try setting the multicast-helper option as I posted directly above your reply?
Yes, multicast-helper=full.
But i am using Ethernet connection between PC and ATV3.
 
eltoozero
just joined
Posts: 15
Joined: Fri Jun 27, 2014 5:16 am

Re: Apple Tv problem!

Tue May 19, 2015 10:16 am

But i am using Ethernet connection between PC and ATV3.
Yes, and the YouTube AirPlay (multicast) traffic from your iOS device lands on the wlan interface of the MikroTik before getting shuttled over the bridge internally and spit out the LAN.

The issue is multicast propagation between wireless and wired, even when they're on the same bridge.

I was going to lab it up and to packet capture but since the multicast-helper option resolved the issue for me I didn't bother.
 
eltoozero
just joined
Posts: 15
Joined: Fri Jun 27, 2014 5:16 am

Re: Apple Tv problem!

Tue May 19, 2015 10:19 am

But i am using Ethernet connection between PC and ATV3.
Yes, and the YouTube AirPlay (multicast) traffic from your iOS device lands on the wlan interface of the MikroTik before getting shuttled over the bridge internally and spit out the LAN.

The issue is multicast propagation between wireless and wired, even when they're on the same bridge.

I was going to lab it up and to packet capture but since the multicast-helper option resolved the issue for me I didn't bother.
Quoting myself since it looks like you're dealing with a different issue if you're pushing content from iTunes on a PC to the AppleTV, you're having issues with audio, or?
 
ksmrnv
just joined
Posts: 9
Joined: Sun May 17, 2015 11:05 am

Re: Apple Tv problem!

Tue May 19, 2015 2:01 pm

I have issue with playing video (1080p)
 
travisres
just joined
Posts: 17
Joined: Wed May 29, 2013 11:53 pm

Re: Apple Tv problem!

Tue May 19, 2015 6:00 pm

I don't have this setup, but since someone further up the chain mentioned that adding a hub/switch between the apple TV and the Mikrotik helped... have you looked at the link between the apple TV and the Tik? What is the port auto negotiated at? Is it flapping? Maybe try setting that port to 100Mbps / Full Duplex rather than letting it auto negotiate.
Screen Shot 2015-05-19 at 10.59.41 AM.png
You do not have the required permissions to view the files attached to this post.
 
ksmrnv
just joined
Posts: 9
Joined: Sun May 17, 2015 11:05 am

Re: Apple Tv problem!

Sat May 30, 2015 10:51 am

I don't have this setup, but since someone further up the chain mentioned that adding a hub/switch between the apple TV and the Mikrotik helped... have you looked at the link between the apple TV and the Tik? What is the port auto negotiated at? Is it flapping? Maybe try setting that port to 100Mbps / Full Duplex rather than letting it auto negotiate.
Sorry for late answer, was busy.
Right now I have tried to set port speed to 100Mbps FDX - no result, movie still buffering infinitely.

I don't have any ideas how to make it works without additional switch between Tik and ATV.
 
User avatar
Nollitik
Member Candidate
Member Candidate
Posts: 257
Joined: Tue Dec 07, 2010 8:16 am

Re: Apple Tv problem!

Mon Jun 01, 2015 1:36 am

If understand correctly, you're trying to stream via airplay from an IOS device to your AppleTV...namely YouTube content...is there any reason you can't get the YouTube content directly from your AppleTV?
 
ksmrnv
just joined
Posts: 9
Joined: Sun May 17, 2015 11:05 am

Re: Apple Tv problem!

Mon Jun 01, 2015 8:54 pm

If understand correctly, you're trying to stream via airplay from an IOS device to your AppleTV...namely YouTube content...is there any reason you can't get the YouTube content directly from your AppleTV?
No, I am trying to stream m4v file via iTunes HomeSharing using Gigabit LAN. And it freezing.
If I playing file using Wi-Fi - it works fine.
 
User avatar
Nollitik
Member Candidate
Member Candidate
Posts: 257
Joined: Tue Dec 07, 2010 8:16 am

Re: Apple Tv problem!

Tue Jun 02, 2015 4:08 am

If understand correctly, you're trying to stream via airplay from an IOS device to your AppleTV...namely YouTube content...is there any reason you can't get the YouTube content directly from your AppleTV?
No, I am trying to stream m4v file via iTunes HomeSharing using Gigabit LAN. And it freezing.
If I playing file using Wi-Fi - it works fine.
Wow...that is certainly strange. Is all devices Apple? In my case, all devices are Apple made (for the synergy)...my Mikrotik RB450G is my main router that subdivided into two networks...my personal and my guess. My personal network is control with an Apple Extreme in bridge mode...to which all Apple devices (laptop, desktop/server, and IOS) connected via a gigabit switch or WIFI. That way I take advantage of the Apple synergy of hardware and software.
 
ksmrnv
just joined
Posts: 9
Joined: Sun May 17, 2015 11:05 am

Re: Apple Tv problem!

Tue Jun 02, 2015 8:13 am

No, only Apple TV.
PC--glan--RB--glan--ATV = freezing
PC--glan--RB--glan--switch--glan--ATV = works fine
PC--glan--RB--802.11n--ATV = works fine
 
Reffr
just joined
Posts: 10
Joined: Mon Nov 28, 2016 5:52 pm

Re: Apple Tv problem!

Sat Dec 24, 2016 5:05 am

I'm having the same problem. Did anyone figure this out?
 
eltoozero
just joined
Posts: 15
Joined: Fri Jun 27, 2014 5:16 am

Re: Apple Tv problem!

Sat Dec 24, 2016 8:37 am

I'm having the same problem. Did anyone figure this out?
Set muticast-helper to full on wlan interface, you need to do it via CLI or enable advanced options.

If you've tinkered, reset the interface to defaults using the reset first.
 
Reffr
just joined
Posts: 10
Joined: Mon Nov 28, 2016 5:52 pm

Re: Apple Tv problem!

Sun Dec 25, 2016 7:47 pm

Thanks for the help. I need a bit more. I have separate wireless hardware connected to the switch that feeds into my MikroTik router. I have eero wireless. So, I'm not using the Mikrotik for wireless. Can you help me with your solution? Not sure how to make it work.

Thanks again! Really appreciate it!
Rob
 
eltoozero
just joined
Posts: 15
Joined: Fri Jun 27, 2014 5:16 am

Re: Apple Tv problem!

Sun Dec 25, 2016 8:30 pm

Doesn't apply then, MikroTik isn't screwing with your LAN traffic unless you configured it to do so.

Good luck with those Eeros, you could have rolled a nice set of Unifi APs for what those cost!
 
stigger
just joined
Posts: 17
Joined: Wed Mar 02, 2016 1:45 pm

Re: Apple Tv problem!

Sun Oct 22, 2017 9:18 pm

Exactly the same problem: when Apple TV connected directly to Ethernet port all traffic stops after utilizing it for 100% for about 10-30 seconds. Adding a switch between Apple TV and mikrotik helps. Not sure how to troubleshoot.
 
stigger
just joined
Posts: 17
Joined: Wed Mar 02, 2016 1:45 pm

Re: Apple Tv problem!

Sun Oct 22, 2017 9:33 pm

Found the solution! Removing the ethernet port from the switch (master port=none) and adding it directly to the bridge fixed the problem for me.