What's new in 6.30.2 (2015-Jul-22 11:17):

*) pptp & l2tp - fixed problem where android client could not connect if
both dns names were not provided (was broken since v6.30);
*) lcd - fix crash (and 100% cpu usage) when interface gets removed from "stats-all" screen
*) tool fetch - fix incomplete ftp download
*) ipsec - fixed crash in when gcm encryption was used
*) certificate manager - fixed memory leak
*) traffic flow - fixed dynamic input/output interface reporting
*) user-manager - fixed username was not shown in /tool user-manager user
*) user-manager - fixed zoom for user-manager homepage when mobile devices used
*) winbox - restrict reversed ranges in dst-port under firewall
*) snmp - fix system scripts table

known issue:
*) Dynamic DNS servers can disappear when "allow-remote-requests" are not enabled

Finally! Yes!

This is how things should progress!

Tools - Traffic Monitor isn't working.

'execute' in not running scheduler.
The problem is still in 6.30.2 did not even repair.
He said several times, even official replies are not, really disappointing.

+1 sheduler not work

*) console - ':execute' command now accepts 'file=' parameter and
    writes script output to scpecified file;
*) console - ':execute' command now accepts script source in "{}" braces,
    like '/system scripts add source=' does;
*) console - ':execute' command now returns internal number of running job,
    that can be used to check and stop execution. For example:
      :local j [:execute {/interface print follow where [:log info "$name"]}]
      :delay 10s
      :do { /system script job remove $j } on-error={}
      

Hi!

After upgrade to 6.30.2
"hAP lite" say "latest firmware is 3.24"
"CCR" say "latest firmware is 3.27"

It's correct?

could not upgrade my CCR1036 to this version.
From system---packages >>>> it shows a message. "ERROR missing wireless-6.30.2-tile.npk"

I download Extra files from the site and put it in the files and did reboot... it did not work.

Hi!

After upgrade to 6.30.2
"hAP lite" say "latest firmware is 3.24"
"CCR" say "latest firmware is 3.27"

It's correct?

yes, different systems have different firmwares. ccr had more updates

Perhaps it makes sense to make the setting "allow firmware autoupgrade when upgrade ROS"?

'execute' in not running scheduler.
The problem is still in 6.30.2 did not even repair.
He said several times, even official replies are not, really disappointing.

+1 sheduler not work

solaoxo, 3bs

how are you testing it? post full example please

it is working for me

there have been many changes to execute, please clarify what is not working specifically

Code: Select all

*) console - ':execute' command now accepts 'file=' parameter and
    writes script output to scpecified file;
*) console - ':execute' command now accepts script source in "{}" braces,
    like '/system scripts add source=' does;
*) console - ':execute' command now returns internal number of running job,
    that can be used to check and stop execution. For example:
      :local j [:execute {/interface print follow where [:log info "$name"]}]
      :delay 10s
      :do { /system script job remove $j } on-error={}
      

:execute has two parameters, actual script and file.

you should write not the name, but the script, like in the changelog example
this works:

Screenshot 2015-07-24 15.41.07.png

could not upgrade my CCR1036 to this version.
From system---packages >>>> it shows a message. "ERROR missing wireless-6.30.2-tile.npk"

I download Extra files from the site and put it in the files and did reboot... it did not work.

remove wireless package from current install. CCR doesn't have wireless interfaces

:execute has two parameters, actual script and file.

you should write not the name, but the script, like in the changelog example
this works:

Screenshot 2015-07-24 15.41.07.png

Give me a specific script can be executed in the name of the scheduler in the script is DDNS.

:execute has two parameters, actual script and file.

you should write not the name, but the script, like in the changelog example
this works:

Screenshot 2015-07-24 15.41.07.png

could not upgrade my CCR1036 to this version.
From system---packages >>>> it shows a message. "ERROR missing wireless-6.30.2-tile.npk"

I download Extra files from the site and put it in the files and did reboot... it did not work.

remove wireless package from current install. CCR doesn't have wireless interfaces

Like I said, you are not using it correctly.

1) your start time is "startup". this is not correct
2) remove "Execute" from scheduler, you don't need it

This is how you need to set it up:

Screenshot 2015-07-24 16.15.19.png

*) winbox - restrict reversed ranges in dst-port under firewall

Tools - Traffic Monitor isn't working.

did it work in previous version?

certificate manager - fixed memory leak

Is it solving a strange issue which I have mostly on RB750G with only 32 MiB of memory - log is full of 'CRL sice exceeds free memory, aborting update'?

IPv6 ND still broken on my RB1100AHx2 with 6.30.2.

Issues:
- on IPv6 change (DHCP client), some old IP allocations are not deleted from the address list (this is a pre-6.27 issue, getting more visible after 6.28).

- Address is correctly assigned from pool (pool and allocation is /64 - correct in 6.29.1 and 6.30.2)
(::1/64 set gives correctly e.g. 2a02:2f09:3344:7000::1/64)
- Clients don't get correct allocations via RA (only link local IP present - win7, can not check for other OS at the moment - 6.30 - 6.30.2)

Reverting to 6.29.1 fixes the ND allocation issue.

I just upgraded our company's CCR1036-8G from 6.3 to 6.30.2 and then upgraded the Firmware from 3.10 to 3.27.

Since upgrading our PPTP VPN connections are dropping randomly with an error "CCP lost compression got our of sync: disabling compression" then the next message is "terminating... - Encryption got out of sync"

Is there anything I can do to resolve this?

I see this was resolved in v6.30 release notes but we never had this error when we were on v6.3.

I just upgraded our company's CCR1036-8G from 6.3 to 6.30.2 and then upgraded the Firmware from 3.10 to 3.27.

Since upgrading our PPTP VPN connections are dropping randomly with an error "CCP lost compression got our of sync: disabling compression" then the next message is "terminating... - Encryption got out of sync"

Is there anything I can do to resolve this?

I see this was resolved in v6.30 release notes but we never had this error when we were on v6.3.

Disable all compression in the ppp profile.

The compression is useless, and actually hurts performance. (feel free to read up on it to verify)

Hello Folks!

Where do I find latest stable, RoS v6.30, should that not be available no the download page ?

Is this what should happen when updating to 6.30.2?

The dummy rules (in firewall filter and in firewall mangle) are not dynamically removed when fasttracking rule is removed: [Ticket#2015072766000161]

Torrent download of 6.30.2 seems stuck on 335 / 356MB, 93.09 %

Direct downloads seem fine though.

so please fix this.

I am update hap lite from _6.31rc6 to 6.30.2 and the script which one is worked fine in 6.31rc6 not work anymore!

pptp server is still broken in 6.30.2
ppp,error,critical 16: Encryption got out of sync - disabling

Is it a MTU related issue?

/ppp profile
add change-tcp-mss=no dns-server=192.168.254.1 local-address=192.168.254.1 name=sstp-server only-one=no remote-address=pool-VPN use-compression=no use-encryption=no use-mpls=no
add change-tcp-mss=no dns-server=192.168.254.1 local-address=192.168.254.1 name=pptp-server only-one=no remote-address=pool-VPN use-compression=no use-encryption=yes use-mpls=no
add name=only-one only-one=yes
/interface pptp-server server
set authentication=mschap2 default-profile=pptp-server

hi guys i have problem with lollipop phone they connect to the server but without internet and they don't open sign in page for hotspot pleaz help my clintes start to be mad
forgive my english it's not that good
if i upgrade to v6.30.2 bugfix release could be the problem go away ?
and how to upgrade

Torrent download of 6.30.2 seems stuck on 335 / 356MB, 93.09 %

Direct downloads seem fine though.

Update to that, it now seems to have completed the download.
Guess there weren't enough seeders -

Torrent download of 6.30.2 seems stuck on 335 / 356MB, 93.09 %

Direct downloads seem fine though.

Update to that, it now seems to have completed the download.
Guess there weren't enough seeders -

Maybe the URL is the problem -
http://www.mikrotik.com/download/router ... .2.torrent
More seeders will join if the URL is published.

This might be something I've come across recently which is more an Android 5.x thing. The device will try to load http://clients3.google.com/generate_204, and if it can't, figures its in a walled garden and decides it won't connect to the wifi automatically...

https://www.chromium.org/chromium-os/ch ... -detection

hi guys i have problem with lollipop phone they connect to the server but without internet and they don't open sign in page for hotspot pleaz help my clintes start to be mad
forgive my english it's not that good
if i upgrade to v6.30.2 bugfix release could be the problem go away ?
and how to upgrade

This might be something I've come across recently which is more an Android 5.x thing. The device will try to load http://clients3.google.com/generate_204, and if it can't, figures its in a walled garden and decides it won't connect to the wifi automatically...

https://www.chromium.org/chromium-os/ch ... -detection

hi guys i have problem with lollipop phone they connect to the server but without internet and they don't open sign in page for hotspot pleaz help my clintes start to be mad
forgive my english it's not that good
if i upgrade to v6.30.2 bugfix release could be the problem go away ?
and how to upgrade

Android I think uses a bit different link for captive portal checking: "http://connectivitycheck.android.com/generate_204" at least the one I have.

/ip hotspot walled-garden
add dst-host=connectivitycheck.android.com method=GET path=/generate_204

Anyhow at moment with android v5.0.2 I haven't had problems with hotspot login check. Also android that Samsung provides on their phones does not seem to disconnect when captive portal auto-detect login ain't used.

*) user-manager - fixed zoom for user-manager homepage when mobile devices used

Like I said, you are not using it correctly.

1) your start time is "startup". this is not correct
2) remove "Execute" from scheduler, you don't need it

This is how you need to set it up:

Screenshot 2015-07-24 16.15.19.png

I know, but had previously been so used up, so relatively simple, sometimes there are several scripts to be called to the same. It is not after 6.29.1 can not be so used.

:execute "script-name" 

after upgrade to 6.30.2 ipsec problem has not been fixed!!

upgrade6302.png

its very critical issue!

What's new in 6.30.2 (2015-Jul-22 11:17):

*) user-manager - fixed username was not shown in /tool user-manager user

What's new in 6.30.2 (2015-Jul-22 11:17):

*) user-manager - fixed username was not shown in /tool user-manager user

in version 6.29 parameter 'username' not used. Used parameter 'name' . So we must to rewrite all scripts to change 'name' to 'username'

I noticed that sometimes logs get messed up.

I don't know on which version this started, but in general the log window keeps doing stuff when nothing is happening (it seems that it refreshes itself at random times messing up the entries shown to the user).

mikrotik logs.png

The last 3 entries are repeated twice. I am not sure if Mikrotik has invented Time travel just yet?

Don't use combined package and install individually selected packages only. Then you will not be surprised by this.

You can use that "comfort" udate feature further, even if you install manually selected packages only instead the combined package. It is your choice, of course...

And you were updating combined package or single packages installation?

I have two questions, why did wireless-fp become enabled ?

What is wireless-cm2, is that something I generally needed in my access points and wireless clients, does that trumph out wireless-fp ?

I have two questions, why did wireless-fp become enabled ?

I can not tell why it's being enable by default, but I can explain to you why it may be useful to enable it on devices without any wireless hardware at all. It is because even if you don't have any wireless hardware installed on the device itself, you can still use CAPsMAN (i.e. Controlled Access Point system Manager) on this device to centrally manage your other access point devices, if any. Feel free to disable the package if you don't need CAPsMAN.

What is wireless-cm2, is that something I generally needed in my access points and wireless clients, does that trumph out wireless-fp ?

The wireless-cm2 package implements CAPsMAN v2, as opposed to CAPsMAN v1 that wireless-fp implements.

Traffic on the bridge
It shows the same in all entries

Finally! Yes!

This is how things should progress!

After upgrade:

traffic flow - not fixed in 6.30.2. Our company uses billing that takes into account the traffic protocol NetFlow. After the upgrade to 6.27 to 6.30.2 missing incoming traffic . Please fix it.

traffic flow - not fixed in 6.30.2. Our company uses billing that takes into account the traffic protocol NetFlow. After the upgrade to 6.27 to 6.30.2 missing incoming traffic . Please fix it.

In 6.30 (or 6.29) added additional info into netflow packet. If your billing use "poor" netflow packet parsing - you get error.

Another bug:
Selecting multiple routing filters and trying to move them up or down, will only move one random rule of those selected instead of all of them.

traffic flow - not fixed in 6.30.2. Our company uses billing that takes into account the traffic protocol NetFlow. After the upgrade to 6.27 to 6.30.2 missing incoming traffic . Please fix it.

In 6.30 (or 6.29) added additional info into netflow packet. If your billing use "poor" netflow packet parsing - you get error.

Then, from where the outbound traffic and pirng that are considered normal?

How about traceroute? You sure this from the hAP?

Just upgraded 2 RB2011 from 6.29 to 6.30.2.

Both RBs have identical configuration (active/standby setup).

The standby RB2011 got upgraded ok, no issues so far.
The active RB2011 never came back online after the upgrade.

any suggestions are welcome.

any suggestions are welcome.

You might try the "netinstall" approach.

Dear MikroTik Support,

ip route pref-src is not working correctly since version 6.30 and later (6.29 and previous version is working fine )

Downgrade to Version 6.29. everything is working correctly.

support.rif and details was submitted by Ticket#2015071966000051 a week ago, but only auto reply from system.

Please follow up, i believe it is small bug and easy to be fixed.

Thank you !

I downgraded from 6.30.2 back to 6.25

I downgraded from 6.30.2 back to 6.25

I wonder if you managed to make a supout.rif before downgrading. There are so many of us complaining about bug here, and so little actually supplying Mikrotik engineers with enough information to reproduce and fix those bugs...

I downgraded from 6.30.2 back to 6.25

I wonder if you managed to make a supout.rif before downgrading. There are so many of us complaining about bug here, and so little actually supplying Mikrotik engineers with enough information to reproduce and fix those bugs...

+1

This is a very important point. IF you can do a BEFORE and AFTER support file where possible. This can greatly aid engineers at Mikrotik and hopefully get to fix quicker.

When it's the best time to generate the supout file anyway?

How can i disable 60+ firewall rules from terminal?
With "fasttrack dummy rule" I can't perform disable [find] because i can't disable dynamic rule.

disable [find dynamic=no]

What's new in 6.30.2 (2015-Jul-22 11:17):

*) pptp & l2tp - fixed problem where android client could not connect if
both dns names were not provided (was broken since v6.30);
*) lcd - fix crash (and 100% cpu usage) when interface gets removed from "stats-all" screen
*) tool fetch - fix incomplete ftp download
*) ipsec - fixed crash in when gcm encryption was used
*) certificate manager - fixed memory leak
*) traffic flow - fixed dynamic input/output interface reporting
*) user-manager - fixed username was not shown in /tool user-manager user
*) user-manager - fixed zoom for user-manager homepage when mobile devices used
*) winbox - restrict reversed ranges in dst-port under firewall
*) snmp - fix system scripts table

known issue:
*) Dynamic DNS servers can disappear when "allow-remote-requests" are not enabled

What's new in 6.30.2 (2015-Jul-22 11:17):

*) pptp & l2tp - fixed problem where android client could not connect if
both dns names were not provided (was broken since v6.30);

I just upgraded our company's CCR1036-8G from 6.3 to 6.30.2 and then upgraded the Firmware from 3.10 to 3.27.

Since upgrading our PPTP VPN connections are dropping randomly with an error "CCP lost compression got our of sync: disabling compression" then the next message is "terminating... - Encryption got out of sync"

Is there anything I can do to resolve this?

I see this was resolved in v6.30 release notes but we never had this error when we were on v6.3.

Disable all compression in the ppp profile.

The compression is useless, and actually hurts performance. (feel free to read up on it to verify)

/ppp profile
set *FFFFFFFE idle-timeout=55s use-compression=no use-encryption=required

Tools - Traffic Monitor isn't working.

did it work in previous version?

Is this a new feature in 6.30.2?

/ip firewall connection remove [find]
action timed out - try again, if error continues contact MikroTik support and send a supout file (13)

I had problems since upgrade from 6.25 to newest version (at last incident it was 6.30.2) on RB1100AHx2 - after few days, the router stopped to respond - still running, reacts to cable connect/disconnect but no response on ethernet ports.

Yesterday I was able to connect to connect using serial port and found everything running as expected, but just no response to network traffic. When attempted to ping local addresses or even 127.0.0.1 I got the error message "No buffer space available" - later I found that an issue with the same symptoms existed in the past and was already fixed (route cache overflow).

Interesting thing is, that we have two RB1100AHx2 routers with the same config (just few different IP addresses), but the second one is just backup with a little traffic and deactivated IPsec tunnels - that one works without any issue so far.

I downgraded from 6.30.2 back to 6.25 which (according to the old thread about this issue) was claimed to fix this issue. We'll see in about 4 days.

Kraken2k did you get a ticket number as a response? Normally you would just email support@mikrotik.com, the form is just a shortcut to the same. Sent it from your email and see if you get a ticket number.