Problems since we changed the isp router( from 100mbps to 200 mbps)

kinomakino · Fri May 29, 2015 1:56 pm

First, thanks in advance.

I have a CCR1016-12G with RouterOS 6.28 (license level 6).
Until a few days ago we had a fiber connection (ONO 100mb) and we were happy.

A few days ago we switched to 200 mbps with the same provider. The isp changed the modem-router ( CG7486E Wireless Gateway )

Since this change, we have trouble navigating. Downloads start, but are stop randomly. If we connect a direct computer tothe ISP router, browse and download perfect

The ISP router is configured as a router.

If we put the ISP router in bridge mode, we have the same problem.

Everything points to the MK, again, the computer connected to the ISP modem works perfectly.

Can you think of anything?

TTL? TImeouts, MTU?

Thanks for the suggestions.

pukkita · Fri May 29, 2015 2:18 pm

Hola

Is this a fiber connection?

kinomakino · Fri May 29, 2015 8:56 pm

YES. Si. COAXIAL input.

THANKS
GRACIAS
MERÇi

pukkita · Wed Jun 03, 2015 2:15 pm

Have you traced connections to see what's happening? Have you tried connecting directly using a SFP module?

TomosRider · Thu Jun 04, 2015 10:29 am

Check your interfaces on Mtik. Are they showing 1Gb or 100Mb's?

andresgr · Fri Oct 16, 2015 2:13 pm

The same problem happens to me. I've tried with two different models of Cloud Core Routers (CCR1009-8G-1S-1S+ and CCR1009-8G-1S). Router configurations are naive. One interface connected to Ono Router configured by dhcp and another interface with a dhcp server with a PC connected to it. NAT masquerade is configured. Anyone has a solution for this issue?

Regards,

mjpol · Sat Oct 31, 2015 5:50 pm

Hello, I have exactly the same problem since I've activated the option of 300mb, modem Ono in bridge mode, ccr1009-8g DHCP wan mode and the rest in bridge mode, I can surf the Internet but with the speed test and downloadsThey cut, if I use only the modem Ono everything works perfectly

I tried to clone the Mac modem in the mikrotik eth but do not assign me ip, I changed several times MTU and nothing

Someone comes up with few other options ???

thanks

Sat Oct 31, 2015 7:14 pm

Have you tried to set ethernet default queues for the interfaces instead only hardware queues set by default config?

mjpol · Sat Oct 31, 2015 7:38 pm

I just tested and the problem persists

mjpol · Sat Nov 07, 2015 5:48 pm

Tonight my provider ONO has updated the firmware of my modem CG7486E to version 5.510.5.9 and fixed the problem, everything works fine

Thanks

Problems since we changed the isp router( from 100mbps to 200 mbps)

Problems since we changed the isp router( from 100mbps to 200 mbps)

Re: Problems since we changed the isp router( from 100mbps to 200 mbps)

Re: Problems since we changed the isp router( from 100mbps to 200 mbps)

Re: Problems since we changed the isp router( from 100mbps to 200 mbps)

Re: Problems since we changed the isp router( from 100mbps to 200 mbps)

Re: Problems since we changed the isp router( from 100mbps to 200 mbps)

Re: Problems since we changed the isp router( from 100mbps to 200 mbps)

Re: Problems since we changed the isp router( from 100mbps to 200 mbps)

Re: Problems since we changed the isp router( from 100mbps to 200 mbps)

Who is online