I'm using two RouterOS 6.33.2 x86 VM in Virtualbox.
Router1 is 172.16.42.10 on ether3, Router2 is 172.16.42.20 on ether3. Both are able to ping.
I added vrrp1 interface on both routers, same vrid (44) on ether3. My virtual IP is up on Routeur1 (highest priority), but when I disable ether3 on Router1, the virtual IP goes down, instead of "moving" to Router2.
Here is the configuration (without disabling ether3 on Router1) :
Routeur 1:
Code: Select all
[admin@mikrotik1] > /interface vrrp print detail
Flags: X - disabled, I - invalid, R - running, M - master, B - backup
0 I name="vrrp1" mtu=1500 mac-address=00:00:5E:00:01:2C arp=enabled
interface=ether3 vrid=44 priority=101 interval=1s preemption-mode=yes
authentication=none password="" on-backup="" on-master="" version=3
v3-protocol=ipv4Code: Select all
[admin@mikrotik1] > /ip address print
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK INTERFACE
[...]
3 172.16.42.10/24 172.16.42.0 ether3
4 I 172.16.42.254/32 172.16.42.254 vrrp1Code: Select all
[admin@mikrotik2] > /interface vrrp print detail
Flags: X - disabled, I - invalid, R - running, M - master, B - backup
0 I name="vrrp1" mtu=1500 mac-address=00:00:5E:00:01:2C arp=enabled
interface=ether3 vrid=44 priority=100 interval=1s preemption-mode=yes
authentication=none password="" on-backup="" on-master="" version=3
v3-protocol=ipv4Code: Select all
[admin@mikrotik2] > /ip address print
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK INTERFACE
[...]
3 172.16.42.20/24 172.16.42.0 ether3
4 I 172.16.42.254/32 172.16.42.254 vrrp1Thanks.