hi,

i am using VPN which is already on mikrotik...PPTP which work perfect...router have static WAN IP from provider...

VPN client which is come conected get local ip over VPN 192.168.0.20-22

but i cannot acess back in local network...example server have adress 192.168.0.110 & printer 192.168.0.111...

what i need to do to have this acees over VPN....

Either enabling "use default gateway on remote network" or adding a route to 192.168.0.0/24 through the PPTP.

In addition to Pukkita's suggestions, be sure to go into your lan interface's settings and set arp type=proxy arp.

Either enabling "use default gateway on remote network" or adding a route to 192.168.0.0/24 through the PPTP.

thanks for help....but do i need to put this on mikrotik side or client?

In addition to Pukkita's suggestions, be sure to go into your lan interface's settings and set arp type=proxy arp.

u mean ether3-4 = slave or even ether 1 = gw & ether 2 = master?

u mean ether3-4 = slave or even ether 1 = gw & ether 2 = master?

Whichever interface has the LAN IP address configured on it.

And as for this:

thanks for help....but do i need to put this on mikrotik side or client?

It's on the client side.

http://l2tp.patokatech.com/
These are winbox screen prints of my L2TP VPN setup, I think PPTP should be similar.

thanks for help....was just change type=proxy arp...and everything start working....