Queue Not Limiting Download

uberdome · Fri Feb 12, 2016 9:56 pm

With "Use IP Firewall" enabled, I often run a simple queue on a port. Periodically, that queue will only limit upload, not download.

I just moved a port that was running correctly (with a queue applied to that port) from one bridge to another. Now that queue only works on upload, not download.

I created a new queue with the same parameters, but it still does not work correctly.

Is there a specific order in which to add a port to a bridge and then add a queue?

Thank you,
Chris

Revelation · Sat Feb 13, 2016 1:45 am

Not sure how the rest of your config works.... Here's an example that I threw together where I can limit the download and upload of a specific IP behind my Mikrotik using simple queues.

Flags: X - disabled, I - invalid, D - dynamic 
 0 XI  name="Test" target=10.10.25.66/32 parent=none packet-marks="" priority=8/8 queue=default-small/default-small 
      limit-at=0/0 max-limit=512k/512k burst-limit=768k/768k burst-threshold=768k/768k burst-time=10s/10s

uberdome · Sat Feb 13, 2016 10:27 am

I'm limiting the speed on a port-by-port basis. I've generally had trouble with port speed queues, but I thought I had the issue resolved. It has been working correctly for months. All I changed was the bridge the port was connected to.

This is a queue that was functioning:

/queue simple
add limit-at=10M/10M max-limit=10100k/10100k name=TH-5M target=\
    ether2-TH-Service

The only connection to this port is through a bridge. I changed the bridge port, and now the download is unlimited on the queue, even though the queue has not changed.

I've tried re-entering the queue, but it does not help.

uberdome · Wed Feb 17, 2016 4:18 pm

BUG?

I got the queue to work. This is on an RB750 running bugfix v6.32.4.

This does not work, and only limits upload:

/queue simple
add max-limit=10100k/10100k name=queue1 target=ether2

This does work, and limits both upload and download correctly:

/queue simple
add max-limit=10100k/10100k name=queue1 target=ether2,0.0.0.0/0

If I check in WinBox, the queue now shows two targets. BUT, in the CLI, printing the queues and the configuration export only shows ether2. Is there something I'm missing here?

flynno · Wed Feb 17, 2016 9:29 pm

Have you tried with bridge ip firewall disabled?

uberdome · Wed Feb 17, 2016 10:53 pm

Have you tried with bridge ip firewall disabled?

The queue does not function at all with "Use IP Firewall" disabled.

flynno · Fri Feb 19, 2016 4:35 pm

Have you tried to remove the port from the bridge?

I use a simple que

/queue simple
add max-limit=1M/5M name=queue1 target=ether1-gateway

uberdome · Fri Feb 19, 2016 8:46 pm

Have you tried to remove the port from the bridge?

I have not. I need the bridge for my system to function correctly (specifically with IP usage, I cannot dedicate a /30 to each port I need to limit).

flynno · Sat Feb 20, 2016 10:35 pm

Disable Bridge

Interfaces> "Select Ether Port" >General
Master Port > "Select Port to make master" to bridge ports you want to bridge this way

That's how I sorted the Queue problem on my metal

facubertran · Sun Sep 03, 2017 4:09 am

Hi, Could you find the solution?

tomasi · Thu Aug 30, 2018 5:22 pm

Same bug here:

Queue over ether3 only controls upload:

Queue Not Limiting Download

Queue Not Limiting Download

Re: Queue Not Limiting Download

Re: Queue Not Limiting Download

Re: Queue Not Limiting Download

Re: Queue Not Limiting Download

Re: Queue Not Limiting Download

Re: Queue Not Limiting Download

Re: Queue Not Limiting Download

Re: Queue Not Limiting Download

Re: Queue Not Limiting Download

Re: Queue Not Limiting Download

Who is online