I use MT 2.9.6 and want to shape my bandwidth using simple queque but with design of tree.
Just like this :
Parents parent=none up/down=512k/512k
256_1 parent=Parents up/down=256k/256k
client1 dest_ip=192.168.100.10/32 parents=256_1 up/down=32k/64k
client2 dest_ip=192.168.100.11/32 parents=256_1 up/down=32k/64k
client3 dest_ip=192.168.100.12/32 parents=256_1 up/down=64k/128k
client4 dest_ip=192.168.100.13/32 parents=256_1 up/down=128k/32k
256_2 parent=Parents up/down=256k/256k
client5 dest_ip=192.168.100.14/32 parents=256_1 up/down=8k/16k
client6 dest_ip=192.168.100.15/32 parents=256_1 up/down=16k/32k
client7 dest_ip=192.168.100.16/32 parents=256_1 up/down=32k/64k
client8 dest_ip=192.168.100.17/32 parents=256_1 up/down=8k/16k
client8 dest_ip=192.168.100.18/32 parents=256_1 up/down=192k/128k
its working ok at Parent and 256_1 group but 256_2 group cant shaping bandwith, there is any possible way? I just try to use PCQ but its not shape well, on winbox PCQ user use only 2,8kbps but on my interface thereis more than 100kbps traffic.
Thanks.
