Community discussions

MikroTik App
  4. Announcements

v6.34.4 [current] is released!

Locked
 
User avatar
strods
MikroTik Support
MikroTik Support
Topic Author
Posts: 1658
Joined: Wed Jul 16, 2014 7:22 am
Location: Riga, Latvia

v6.34.4 [current] is released!

Tue Mar 29, 2016 10:10 am

What's new in 6.34.4 (2016-Mar-24 13:13):

*) bonding - fixed crash on bonding slave release;
*) bonding - fixed mac-address disappearance after reboot in specific setups;
*) chr - fixed reboots with license and queues;
*) console - allow unknown scan-list names on wireless configuration to fix import;
*) ethernet - fixed Netmetal, QRT, DynaDish, SXT ac linking at 10/100Mbps (introduced in 6.34.x);
*) fastpath - fixed rare kernel failure;
*) ipsec - take into account ip protocol in kernel policy matcher;
*) mac-winbox - try to aggregate packets & resend all pending packets on timeout;
*) ppp - do not crash when received multiple CBCP packets;
*) ppp - fixed crash when ppp interface gets disconnected and user gets authenticated at the same time (most probable with slow RADIUS server);
*) quickset - fixed wan interface selection on devices with SFP interfaces;
*) quickset - use 5GHz interface instead of 2GHz interface on SXT Lite5 ac;
*) rb3011 - fixed high cpu load breaks ethernet stats;
*) rb3011 - fixed link down messages;
*) romon - fixed romon discovery after romon ID change;
*) timezone - fixed reboot by watchdog when selecting timezones from the end of list;
*) userman - fixed www crash;
*) winbox - allow to show revoked & authority flags at the same time;
*) winbox - correctly recognise if there is need to report fan information under system health;
*) winbox - do not use area v2 names instead of ospf v3 area names;
*) winbox - make mac-winbox work with RB850;

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after crash.
Top
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 2182
Joined: Mon Jan 14, 2008 1:53 pm
Location: Over the Rainbow
Contact:
Contact nz_monkey

Re: v6.34.4 [current] is released!

Tue Mar 29, 2016 10:17 am

Thanks Mikrotik.

Another fine release.
Top
 
User avatar
ufm
Member Candidate
Member Candidate
Posts: 103
Joined: Fri Nov 15, 2013 12:02 pm
Location: Ukraine

Re: v6.34.4 [current] is released!

Tue Mar 29, 2016 1:47 pm

Thnx for bugfixes.
Top
 
nxs02
Member Candidate
Member Candidate
Posts: 119
Joined: Sat Nov 07, 2015 1:25 pm
Location: Planet Earth

Re: v6.34.4 [current] is released!

Tue Mar 29, 2016 4:22 pm

nice...
keep the good work...
Top
 
User avatar
paoloaga
Member Candidate
Member Candidate
Posts: 227
Joined: Tue Mar 08, 2011 2:52 am
Location: Lugano - Switzerland
Contact:
Contact paoloaga

Re: v6.34.4 [current] is released!

Tue Mar 29, 2016 4:26 pm

Is the clock skew problem on RB3011 fixed in this release or is it only on 6.35rc ?

Thanks MT for the great job, things improved a lot since you branched between stable & development releases!
Top
 
User avatar
noyo
Member Candidate
Member Candidate
Posts: 124
Joined: Sat Jan 28, 2012 12:25 am
Location: Mazury - Poland
Contact:
Contact noyo

Re: v6.34.4 [current] is released!

Tue Mar 29, 2016 11:34 pm

What's new in firmware v3.32 ?
Top
 
StefanM
newbie
Posts: 49
Joined: Sun Dec 13, 2015 1:49 am

Re: v6.34.4 [current] is released!

Wed Mar 30, 2016 12:17 am

So what happen earlier yesterday is after upgrading one of my test mikrotiks to v6.34.4 and we did some testings for ipv6 and after rebooting router my wireless interface disappeared, did couple of reboots and it was not there, the package was enabled and everything looked fine but after rebooting a router wireless interface disappeared, so i had to downgrade to 34.3
I don't have support file, neither am able to send it right now, so just describing what happen. Hope it helps.
Top
 
nxs02
Member Candidate
Member Candidate
Posts: 119
Joined: Sat Nov 07, 2015 1:25 pm
Location: Planet Earth

Re: v6.34.4 [current] is released!

Wed Mar 30, 2016 3:00 am

firmware release notes is in http://wiki.mikrotik.com/wiki/RouterBOOT_changelog
but they not update it yet...
Top
 
hapi
Member Candidate
Member Candidate
Posts: 232
Joined: Fri Mar 11, 2011 11:21 am
Location: Czech Republic

Re: v6.34.4 [current] is released!

Wed Mar 30, 2016 10:22 am

IPv6 local link address may be deleted. Is not it a mistake?
Top
 
satcom
just joined
Posts: 23
Joined: Sat Jun 28, 2014 8:10 am

Re: v6.34.4 [current] is released!

Wed Mar 30, 2016 8:17 pm

After upgrade RB850Gx2 i can´t login from winbox v3.4 with my ip,only with mac id???
What is new:
*) winbox - make mac-winbox work with RB850
Top
 
User avatar
noyo
Member Candidate
Member Candidate
Posts: 124
Joined: Sat Jan 28, 2012 12:25 am
Location: Mazury - Poland
Contact:
Contact noyo

Re: v6.34.4 [current] is released!

Wed Mar 30, 2016 8:20 pm

firmware release notes is in http://wiki.mikrotik.com/wiki/RouterBOOT_changelog
but they not update it yet...
I know this page.
Top
 
User avatar
isolnet
newbie
Posts: 45
Joined: Sat Jan 30, 2016 7:28 am
Location: India

Re: v6.34.4 [current] is released!

Wed Mar 30, 2016 9:32 pm

I think bug in CPU Frequency

Image
Top
 
User avatar
Splash
Member Candidate
Member Candidate
Posts: 207
Joined: Fri Oct 16, 2015 10:09 am
Location: Johannesburg, South Africa

Re: v6.34.4 [current] is released!

Thu Mar 31, 2016 10:32 am

After upgrading from version 6.34.3 to 6.34.4 within a few hours the device (RB493G) stops responding over an SSTP VPN connection. The connection reports up on the CPE, but down on the VPN concentrator (CCR). The device is monitored over the SSTP connection using PING and SNMP.
  • System resources look fine.
  • Running a /export hangs
  • Reboot takes a long time to action
  • Saving a Supout.rif file takes a long time.
  • Disabling/Renabling the SSTP interface fails.
Downgrading back to 6.34.2 resolves the problem.
Top
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2397
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.34.4 [current] is released!

Fri Apr 01, 2016 12:06 pm

What's new in firmware v3.32 ?
Changelog is now to v3.31:
http://wiki.mikrotik.com/wiki/RouterBOOT_changelog
Top
 
nxs02
Member Candidate
Member Candidate
Posts: 119
Joined: Sat Nov 07, 2015 1:25 pm
Location: Planet Earth

Re: v6.34.4 [current] is released!

Fri Apr 01, 2016 3:12 pm

What's new in firmware v3.32 ?
Changelog is now to v3.31:
http://wiki.mikrotik.com/wiki/RouterBOOT_changelog
yes finally... :) :)
keep up the good work guys...
Top
 
User avatar
kometchtech
Member Candidate
Member Candidate
Posts: 194
Joined: Sat Jun 15, 2013 4:25 am
Location: Japan
Contact:
Contact kometchtech

Re: v6.34.4 [current] is released!

Fri Apr 01, 2016 4:24 pm

I think bug in CPU Frequency

Image
+1
Top
 
mainTAP
Frequent Visitor
Frequent Visitor
Posts: 57
Joined: Tue Oct 02, 2012 4:01 am

Re: v6.34.4 [current] is released!

Mon Apr 04, 2016 4:54 pm

Dear Team,

Unfortunately after upgrading RB951G-2HnD to 6.34.4 my IPsec/L2TP from Android clients is not working.
Downgrading back to 6.32.4 solves the issue, but even upgrading to the latest 6.35rc45 is not working.
The connection just time-outs and does not give any particular error.
It seems that the router_os struggles to create dynamic policies for the SAs.
Thank you.
Top
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 7188
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:
Contact mrz

Re: v6.34.4 [current] is released!

Mon Apr 04, 2016 6:42 pm

Works fine with any ROS version on our routers. Enable ipsec debug logs and see where exactly is the problem.
Top
 
User avatar
saaremaa
Member Candidate
Member Candidate
Posts: 163
Joined: Tue Feb 02, 2010 7:48 pm
Location: Lithuania, Kaunas

Re: v6.34.4 [current] is released!

Thu Apr 07, 2016 8:48 am

On 6.34.4 not work DHCPv6 client. I can't get IPV6 prefix and IPv6 from DHCPv6 server (Mikrotik Router OS 6.32.4).
Top
 
Tonda
Member Candidate
Member Candidate
Posts: 165
Joined: Thu Jun 30, 2005 12:59 pm

Re: v6.34.4 [current] is released!

Thu Apr 07, 2016 11:09 am

I have noticed port flapping of CRS212-1G-10S-1S+ in 6.34.4 (see http://forum.mikrotik.com/viewtopic.php?f=3&t=107000)
Top
 
User avatar
bax
Member Candidate
Member Candidate
Posts: 268
Joined: Mon Dec 20, 2004 8:45 pm
Location: Croatia

Re: v6.34.4 [current] is released!

Fri Apr 08, 2016 3:22 pm

It looks that web proxy not mark cashed files with cashe hits DSCP TOS 4 ? can somebody also check
Top
 
Siona
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Thu Jan 29, 2015 11:56 am

Fri Apr 08, 2016 5:36 pm

What about voltage monitor in rb493g? It still seems not work.
Top
 
ddejager
Member Candidate
Member Candidate
Posts: 135
Joined: Tue Oct 18, 2011 5:13 am

Re: v6.34.4 [current] is released!

Sat Apr 09, 2016 2:54 am

I was running 6.34.1. I upgraded to 6.34.4 on Tuesday. Since then the CPU has jumped up by about 10 percent. Profile shows that the additional CPU is all going to "unassigned". Device is CRS125-24G-1S-2HnD.
Top
 
nickjail
just joined
Posts: 15
Joined: Mon Feb 17, 2014 9:26 pm

Re: v6.34.4 [current] is released!

Sun Apr 10, 2016 9:55 am

Hi!

Got problem with sector writes after enabling IP cloud. This problem was in 6.34.3 and now it exist in latest 6.34.4

Without IP cloud there is ablout ~1500-2000 sectors per day
Image

After enabling IP cloud about ~10000 sectors per day :shock:
Image

tryed to reboot, reset configuration. But after enabling IP cloud big amout of sectors starts writing.
Top
 
africantech
just joined
Posts: 7
Joined: Mon Jan 11, 2016 11:03 am

Re: v6.34.4 [current] is released!

Sun Apr 10, 2016 2:26 pm

v6.34.4

When I try to download from within winbox, it gives an error:

ERROR: missing wireless-6.34.4-mipsbe.npk

Current Version: 6.33.3
Winbox: 3.4
Top
 
Neilson
Member Candidate
Member Candidate
Posts: 174
Joined: Tue Nov 06, 2012 10:42 pm
Location: Auckland, New Zealand

Re: v6.34.4 [current] is released!

Tue Apr 12, 2016 1:00 pm

v6.34.4

When I try to download from within winbox, it gives an error:

ERROR: missing wireless-6.34.4-mipsbe.npk

Current Version: 6.33.3
Winbox: 3.4
Please ensure you delete any downloaded npk files from the files folder, go to the packages window System > Packages and click on wireless and select uninstall.

In 6.34 Mikrotik removed the wireless package from the system so FP is the base one and CM2 is the "to be base" (and default on some newer models - SMIPS)

If you are using the all in one package to supply your wifi package then it should upgrade automatically, if you are using individual packages you will need to manually remove the wireless package or it will fail to download.

This was mentioned on the earlier 6.34 release notes.

Regards
Alexander
Top
 
sensor
just joined
Posts: 6
Joined: Thu Feb 25, 2016 11:32 pm

Re: v6.34.4 [current] is released!

Wed Apr 13, 2016 11:00 am

Ccr1009. After update 6.34.2 to 6.34.4. I have problem: L2tp stop working. Router one time have stop working and i reset him. And portforwarding don't work for me, any new open port don't opened.
Top
 
ddejager
Member Candidate
Member Candidate
Posts: 135
Joined: Tue Oct 18, 2011 5:13 am

Re: v6.34.4 [current] is released!

Wed Apr 13, 2016 5:44 pm

Please delete this post. Sorry.
Top
 
k750
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Fri Feb 19, 2016 4:40 pm
Location: France / Paris

Re: v6.34.4 [current] is released!

Fri Apr 15, 2016 12:03 am

On 6.34.4 not work DHCPv6 client. I can't get IPV6 prefix and IPv6 from DHCPv6 server (Mikrotik Router OS 6.32.4).
It is planned for the Version 7 release
Top
 
modrzyk
just joined
Posts: 3
Joined: Sat May 23, 2015 8:14 pm

Re: v6.34.4 [current] is released!

Fri Apr 15, 2016 9:12 am

How to fix update error?
status: ERROR: missing wireless-6.32.4-mipsbe.npk on MikroTik RB951G-2HnD current-version: 6.32.3
Top
 
Neilson
Member Candidate
Member Candidate
Posts: 174
Joined: Tue Nov 06, 2012 10:42 pm
Location: Auckland, New Zealand

Re: v6.34.4 [current] is released!

Fri Apr 15, 2016 11:45 am

How to fix update error?
status: ERROR: missing wireless-6.32.4-mipsbe.npk on MikroTik RB951G-2HnD current-version: 6.32.3

Please see above at: http://forum.mikrotik.com/viewtopic.php ... 76#p532594

If this is not working for you please let us know what error you are seeing or whats happening to you that is preventing you completing the upgrade and we can try help you out.

Regards
Alexander
Top
Locked

Who is online

Users browsing this forum: East2, peri, sindy and 10 guests
  4. Announcements