Community discussions

MikroTik App
 
neeraj_k
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 70
Joined: Tue Jun 22, 2004 3:28 pm

load balancing with single gateway

Thu Oct 12, 2006 11:50 am

Hi,
I'd got multiple pppoe accounts from the same service provider. So i get the same gateway. How to do load balancing in this kind of scenario

clients <>eth0.....................eth1<>pppoe1
pppoe2
pppoe3
all pppoe get the same gateway

scenario 2
the only difference is tht i get one ip on the client.
client one Ip only <>eth0.....................eth1<>pppoe1
pppoe2
pppoe3
thnx
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26822
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia
Contact:

Thu Oct 12, 2006 11:51 am

this was discussed before. you would need some `per interface` routing, but this is not supported.
 
cmit
Forum Guru
Forum Guru
Posts: 1547
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Thu Oct 12, 2006 2:53 pm

Which makes me ask again if this could be introduced in 3.0 (for point-to-point interfaces only, as it makes not much sense on other interface types)?

Best regards,
Christian Meis
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26822
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia
Contact:

Thu Oct 12, 2006 4:09 pm

you could add two routers - one for each pppoe connection. the current one will loadbalance to the two :)
            __________ ISP 1
        R2 /
R1-------
        R3 \__________ ISP 2
 
cmit
Forum Guru
Forum Guru
Posts: 1547
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Thu Oct 12, 2006 4:41 pm

Aarg - two more possible points of failure (not to talk about expenses).

Having several (separate) uplinks to the same provider (with the same gateway) mostly is a sign of using several ADSL or the like as a cheap "uplink". So cost WILL be a matter here.

And - come on - this one is really easy to implement, no? PLEASE!

Best regards,
Christian Meis
 
changeip
Forum Guru
Forum Guru
Posts: 3833
Joined: Fri May 28, 2004 5:22 pm

Thu Oct 12, 2006 5:09 pm

Yes, please please please ...
 
neeraj_k
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 70
Joined: Tue Jun 22, 2004 3:28 pm

Mon Oct 23, 2006 7:58 pm

ok routers installed. as per picture above in normis' post. does these router i:e r1 and r2 needs to be connected on different ethernet interface or multiples ips can be added on the same ethernet and do the load balancing.
regards
 
changeip
Forum Guru
Forum Guru
Posts: 3833
Joined: Fri May 28, 2004 5:22 pm

Mon Oct 23, 2006 8:08 pm

You can use the same interface if you choose. Preferred source might come into play. As long as you have unique gateway IPs is what matters.
 
neeraj_k
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 70
Joined: Tue Jun 22, 2004 3:28 pm

Tue Oct 24, 2006 3:01 pm

all done load balancing working but as soon as i start hotspot browsing stops rest ports working fine. It gives error Mikrotik proxy error 504

Who is online

Users browsing this forum: anv, Partial, qatar2022, superreeen and 59 guests