Hello Guys

1- I install Dude 3.6 on my Windows 8.1
2- I add my 8 port Huawei switch, Local host, and Google(8.8.8.


I start Device discovery process but it does not detect my switch. Why?

please help me.

Is your switch manageable?

This is the conflagration of Switch
If have to do any changes then please let me know.
<Quidway>dis current-configuration
#
!Software Version V100R006C05
sysname Quidway
#
info-center source ARP channel 7 trap level informational
info-center snmp channel 7
#
vlan batch 20
#
vlan 20
description management
#
aaa
authentication-scheme default
authorization-scheme default
accounting-scheme default
domain default
domain default_admin
local-user jags password cipher %@%@k4^j(P}PiEO&DE2]8%XSTJeD%@%@
local-user admin password cipher %@%@5d~9:M^ipCfL\iB)EQd>3Uwe%@%@
local-user admin service-type http
local-user hathway password cipher %@%@&~8,F.lGq@~WjV:@*vR@,.2n%@%@
local-user hathway privilege level 15
local-user hathway service-type telnet
#
interface Vlanif20
ip address 192.168.10.5 255.255.255.0
#
interface Ethernet0/0/1
port link-type access
port default vlan 20
#
interface Ethernet0/0/2
port link-type access
port default vlan 20
#
interface Ethernet0/0/3
port link-type access
port default vlan 20
#
interface Ethernet0/0/4
port link-type access
port default vlan 20
#
interface Ethernet0/0/5
#
interface Ethernet0/0/6
#
interface Ethernet0/0/7
#
interface Ethernet0/0/8
#
interface GigabitEthernet0/0/1
#
interface NULL0
#
snmp-agent
snmp-agent local-engineid 000007DB7F0000010000413E
snmp-agent community write cipher %@%@x)vg@^j#;=Vp6#T&;oE.TAyMW8](CmSg[>LZi8Lu>bh>AyPTvm@%KYV)R%}G/X@bi,GSyYTA%@%@
snmp-agent sys-info version v3
snmp-agent target-host trap address udp-domain 192.168.10.1 params securityname public1 v3
snmp-agent target-host trap address udp-domain 192.168.10.5 params securityname public1 v3
snmp-agent trap enable
#
user-interface con 0
authentication-mode password
user privilege level 15
set authentication password cipher %@%@88"L*7ih28!J|H6d^elL,"".mRl@A_;Ff'+762KQa^ZD""1,%@%@
user-interface vty 0 4
authentication-mode aaa
#
port-group 1
group-member Ethernet0/0/1
group-member Ethernet0/0/2
group-member Ethernet0/0/3
group-member Ethernet0/0/4
#
return