I know there is a 3 meter SFP+ Direct Access Cable http://routerboard.com/SplusDA0003

However, my CCR1009 and CRS226 are about 10 meters apart.

What would be a good way to connect them?
(I'm in The Netherlands so I prefer suppliers with a reasonable shipping cost there).

i.e.:
- are there 10 meter SFP+ DAC and if so: which one to buy?
- should I go for two SFP+ modules and fiber cable and if so which ones to buy? (especially since http://wiki.mikrotik.com/wiki/MikroTik_ ... lity_table is a bit intimidating)

Yes: I'm a fiber n00b (:

--jeroen

Get most of my fiber supplies from FiberStore http://www.fs.com
10m sfp+ DAC http://www.fs.com/products/30778.html

Hello Jeroen, I am also from the Netherlands and can help you with this. Please send me a PM if needed. We are very experienced working with Mikrotik and DAC/SFP+ in combination with a lot of switching brands.
For your info DAC is possible up to 10m, but that would require active DAC cables.

In essence you need 2x SFP+ model S+85DLC03D and 1 ONM3 LC-LC cable.
Optics can be aquired from allekabels.nl or any other seller. allekabels.nl are not the cheepest but they have a lot on stock.

http://www.allekabels.nl/lc-glasvezelka ... c-om3.html

Succes, en de groeten uit Brabant.

Thanks.

Why would I choose this SFP+ module over the others?

Are SFP+ modules compatible with the SFP ports?

--jeroen (originally from Brabant too)

The mentioned SFP+ modules are 310nm versions special for short distance (up to 300 meters). Other modules are for longer distance, like 10km etc.
I am not sure SFP+ modules are compatible with 1Gbit SFP ports.

Thanks. So basically it comes down to:

1. distance >3 requires active DAC which is a lot more expensive than passive DAC
2. LC-LC fiber cable is cheap, but the modules aren't, so it takes bit of math to find the sweet spot.

Now what about the bending radius of DAC cables vs LC-LC cables?

--jeroen

If you only need 1Gbit connection you can use this MikroTik SFP module:
https://linitx.com/product/mikrotik-rou ... -ddm/13740

Nick

Active DAC 10Gbit is +/- € 120,- excl. VAT.
2x SFP+ incl. 10m LC-LC ONM3 cable is +/- € 150,-

So pricing is comparable.

SFP+ modules plus LC-LC cable gives you more flexibility. Just change the LC-LC cable if you need more or less lenght (up to around 300m).

If you only need 1Gbit connection you can use this MikroTik SFP module:
https://linitx.com/product/mikrotik-rou ... -ddm/13740

Thanks.
That was the 1G S-85DLC05D at ~GBP 20. The 10G S+85DLC03D at ~GBP 50 is at https://linitx.com/product/mikrotik-sfp ... 50nm/13944
Other sources:

• 1G S-85DLC05D 
  • at ~EUR 40 http://www.routershop.nl/mikrotik-s-85dlc05d/pid=35748
  • at ~EUR 20 http://www.eurodk.com/en/products/fiber ... multi-mode
• 10G S+85DLC03D 
  • at ~EUR 65 http://www.routershop.nl/mikrotik-s-85dlc30d/pid=35752
  • at ~EUR 50 http://www.eurodk.com/en/products/fiber ... multi-mode

--jeroen