greetings ..
I'm broadcasting by an Omni-Tik device to several Nanostation m5 (UBNT) ..
the distance is no more than 200 meters and there are no blocks or buildings or trees or any interference in any way ..
the Omin-Tik is a 3-5 meters higher than the station devices mentioned above ..
please take a look to the snapshots for more details in order to help me getting the best signal and CCQ ..
Thanks for your time in advance..
Regards ..
Omni-Tik signal and CCQ issues
You do not have the required permissions to view the files attached to this post.
Last edited by andriys on Wed Jun 22, 2016 12:19 pm, edited 2 times in total.
Reason: Converted huge (size=150) characters to normal. There's no need to shout here.
Reason: Converted huge (size=150) characters to normal. There's no need to shout here.
Re: Omni-Tik signal and CCQ issues
the rest of it
You do not have the required permissions to view the files attached to this post.
Re: Omni-Tik signal and CCQ issues
Poor signal levels, unsecured connection. Mixing ubnt with mikrotik is not advisable. But in your case the signal levels should be much much better. What are your actual tx values?
Use 802.11 protocol and wpa2 in security profile.
Use 802.11 protocol and wpa2 in security profile.
Re: Omni-Tik signal and CCQ issues
Thank you for your replay ..Poor signal levels, unsecured connection. Mixing ubnt with mikrotik is not advisable. But in your case the signal levels should be much much better. What are your actual tx values?
Use 802.11 protocol and wpa2 in security profile.
your answer is accurate.