Community discussions

MikroTik App
 
MartinT
newbie
Topic Author
Posts: 26
Joined: Wed Jul 22, 2009 1:28 am
Location: CZ

pppoe-client on ADSL line not work after upgrade to 6.34.6 (potential bug or T-Mob CZ ADSL incompatibility ?)

Thu Jul 14, 2016 4:14 pm

I upgraded CRS-125 from 6.32.3 to 6.34.6 and pppoe-client was not able to connect via ADSL line (ADSL modem is in bridge mode).
There was no configuration change. Before upgrade, router was working through ADSL more than 6 months. Downgrade to 6.32.4 solved this issue.
Be carefully with upgrade to this "Bugfix only" release if you depend on ADSL.

Configuration is quite simple:


[code]/interface pppoe-client add name=ether24 user=ADSL password=ADSL interface=adsl-tmob add-default-route=yes use-peer-dns=no max-mtu=1492;

ppp profile print
0 * name="default" use-mpls=default use-compression=default use-encryption=default only-one=default change-tcp-mss=yes address-list=""[/code]

Logs from 6.34.6 with "[i]topics=pppoe,debug,!packet[/i]" enabled:


[code]12:22:34 pppoe,ppp,info adsl-tmob: initializing...
12:22:34 pppoe,ppp,info adsl-tmob: connecting...
12:22:34 pppoe,ppp,debug adsl-tmob: LCP lowerup
12:22:34 pppoe,ppp,debug adsl-tmob: LCP open
12:22:34 pppoe,ppp,debug adsl-tmob: LCP timer
12:22:34 pppoe,ppp,debug adsl-tmob: LCP opened
12:22:35 pppoe,ppp,info adsl-tmob: authenticated
12:22:35 pppoe,ppp,debug adsl-tmob: IPCP lowerup
12:22:35 pppoe,ppp,debug adsl-tmob: IPCP open
12:22:35 pppoe,ppp,debug adsl-tmob: IPV6CP open
12:22:35 pppoe,ppp,debug adsl-tmob: MPLSCP lowerup
12:22:35 pppoe,ppp,debug adsl-tmob: MPLSCP open
12:22:35 pppoe,ppp,debug adsl-tmob: BCP open
12:22:35 pppoe,ppp,debug adsl-tmob: CCP lowerup
12:22:35 pppoe,ppp,debug adsl-tmob: CCP open
12:22:35 pppoe,ppp,debug adsl-tmob: IPCP opened
12:22:35 pppoe,ppp,info adsl-tmob: connected
12:22:36 pppoe,ppp,debug adsl-tmob: LCP missed echo reply
12:22:36 pppoe,ppp,debug adsl-tmob: LCP lowerdown
12:22:36 pppoe,ppp,debug adsl-tmob: LCP closed
12:22:36 pppoe,ppp,debug adsl-tmob: CCP lowerdown
12:22:36 pppoe,ppp,debug adsl-tmob: BCP lowerdown
12:22:36 pppoe,ppp,debug adsl-tmob: BCP down event in starting state
12:22:36 pppoe,ppp,debug adsl-tmob: IPCP lowerdown
12:22:36 pppoe,ppp,debug adsl-tmob: IPCP closed
12:22:36 pppoe,ppp,debug adsl-tmob: IPV6CP lowerdown
12:22:36 pppoe,ppp,debug adsl-tmob: IPV6CP down event in starting state
12:22:36 pppoe,ppp,debug adsl-tmob: MPLSCP lowerdown
12:22:36 pppoe,ppp,info adsl-tmob: terminating... - hungup
12:22:36 pppoe,ppp,debug adsl-tmob: LCP lowerdown
12:22:36 pppoe,ppp,debug adsl-tmob: LCP down event in starting state
12:22:36 pppoe,ppp,info adsl-tmob: disconnected
12:22:36 pppoe,ppp,info adsl-tmob: initializing...
12:22:36 pppoe,ppp,info adsl-tmob: connecting...
12:22:38 pppoe,debug ether24: received PADO with unknown host-uniq, dropping
12:23:08 pppoe,ppp,info adsl-tmob: terminating... - disconnected
12:23:08 pppoe,ppp,debug adsl-tmob: LCP lowerdown
12:23:08 pppoe,ppp,debug adsl-tmob: LCP down event in starting state
12:23:08 pppoe,ppp,info adsl-tmob: disconnected
12:23:08 pppoe,ppp,info adsl-tmob: initializing...
12:23:08 pppoe,ppp,info adsl-tmob: connecting...
12:23:39 pppoe,ppp,info adsl-tmob: terminating... - disconnected
12:23:39 pppoe,ppp,debug adsl-tmob: LCP lowerdown
12:23:39 pppoe,ppp,debug adsl-tmob: LCP down event in starting state
12:23:39 pppoe,ppp,info adsl-tmob: disconnected
12:23:40 pppoe,ppp,info adsl-tmob: initializing...
12:23:40 pppoe,ppp,info adsl-tmob: connecting...
12:24:14 pppoe,ppp,info adsl-tmob: terminating... - disconnected
12:24:14 pppoe,ppp,debug adsl-tmob: LCP lowerdown
12:24:14 pppoe,ppp,debug adsl-tmob: LCP down event in starting state
12:24:14 pppoe,ppp,info adsl-tmob: disconnected
12:24:15 pppoe,ppp,info adsl-tmob: initializing...
12:24:15 pppoe,ppp,info adsl-tmob: connecting...
12:24:21 pppoe,ppp,debug adsl-tmob: LCP lowerup
12:24:21 pppoe,ppp,debug adsl-tmob: LCP open
12:24:21 pppoe,ppp,debug adsl-tmob: LCP timer
12:24:21 pppoe,ppp,debug adsl-tmob: LCP opened
12:24:21 pppoe,ppp,info adsl-tmob: authenticated
12:24:21 pppoe,ppp,debug adsl-tmob: IPCP lowerup
12:24:21 pppoe,ppp,debug adsl-tmob: IPCP open
12:24:21 pppoe,ppp,debug adsl-tmob: IPV6CP open
12:24:21 pppoe,ppp,debug adsl-tmob: MPLSCP lowerup
12:24:21 pppoe,ppp,debug adsl-tmob: MPLSCP open
12:24:21 pppoe,ppp,debug adsl-tmob: BCP open
12:24:21 pppoe,ppp,debug adsl-tmob: CCP lowerup
12:24:21 pppoe,ppp,debug adsl-tmob: CCP open
12:24:22 pppoe,ppp,debug adsl-tmob: IPCP opened
12:24:22 pppoe,ppp,info adsl-tmob: connected
12:24:22 pppoe,ppp,debug adsl-tmob: LCP missed echo reply
12:24:23 pppoe,ppp,debug adsl-tmob: LCP lowerdown
12:24:23 pppoe,ppp,debug adsl-tmob: LCP closed
12:24:23 pppoe,ppp,debug adsl-tmob: CCP lowerdown
12:24:23 pppoe,ppp,debug adsl-tmob: BCP lowerdown
12:24:23 pppoe,ppp,debug adsl-tmob: BCP down event in starting state
12:24:23 pppoe,ppp,debug adsl-tmob: IPCP lowerdown
12:24:23 pppoe,ppp,debug adsl-tmob: IPCP closed
12:24:23 pppoe,ppp,debug adsl-tmob: IPV6CP lowerdown
12:24:23 pppoe,ppp,debug adsl-tmob: IPV6CP down event in starting state
12:24:23 pppoe,ppp,debug adsl-tmob: MPLSCP lowerdown
12:24:23 pppoe,ppp,info adsl-tmob: terminating... - hungup
12:24:23 pppoe,ppp,debug adsl-tmob: LCP lowerdown
12:24:23 pppoe,ppp,debug adsl-tmob: LCP down event in starting state
12:24:23 pppoe,ppp,info adsl-tmob: disconnected
12:24:26 pppoe,ppp,info adsl-tmob: initializing...
12:24:26 pppoe,ppp,info adsl-tmob: connecting...
12:24:28 pppoe,debug ether24: received PADO with unknown host-uniq, dropping[/code]
 
angboontiong
Forum Guru
Forum Guru
Posts: 1136
Joined: Fri Jan 16, 2009 9:59 am

Re: pppoe-client on ADSL line not work after upgrade to 6.34.6 (potential bug or T-Mob CZ ADSL incompatibility ?)

Wed May 02, 2018 2:22 pm

hi,

how you solve this issue ?
 
MartinT
newbie
Topic Author
Posts: 26
Joined: Wed Jul 22, 2009 1:28 am
Location: CZ

Re: pppoe-client on ADSL line not work after upgrade to 6.34.6 (potential bug or T-Mob CZ ADSL incompatibility ?)

Wed May 02, 2018 5:31 pm

how you solve this issue ?

At the time .. by downgrade to 6.32.4.

6 months later we had window to play with it .. solution for 6.36.4 was "max-mtu=1460 max-mru=1460 mrru=1600" (perhabs mrru is not necessary).

Who is online

Users browsing this forum: nichky, silverbios and 49 guests