Community discussions

MikroTik App
 
User avatar
ant0nPL
just joined
Topic Author
Posts: 8
Joined: Thu Jul 28, 2016 3:04 pm
Location: Radziejow / Poland

RB433 rebooting because of kernel failure

Thu Jul 28, 2016 3:43 pm

Hello,

I've got a problem with my four Mikrotiks RB433. Since I turned on NV2 protocol devices randomly reboot. Sometimes is once per a day, sometime couple of times in few minutes.
Any ideas why this problem appear?
In attachment an image with example from log of one RB433. This is the worst.
Please help me.
Regards,
Andrzej
You do not have the required permissions to view the files attached to this post.
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 7210
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: RB433 rebooting because of kernel failure

Thu Jul 28, 2016 3:47 pm

This is user forum. Nobody will be able to answer here why kernel is crashing.
Send supout file to support.
 
User avatar
reidavidinho
Frequent Visitor
Frequent Visitor
Posts: 80
Joined: Mon Jul 25, 2016 11:11 am
Location: Ibadan, Nigeria
Contact:

Re: RB433 rebooting because of kernel failure

Thu Jul 28, 2016 3:52 pm

Have you reloaded the OS?
 
User avatar
ant0nPL
just joined
Topic Author
Posts: 8
Joined: Thu Jul 28, 2016 3:04 pm
Location: Radziejow / Poland

Re: RB433 rebooting because of kernel failure

Thu Jul 28, 2016 4:11 pm

This is user forum. Nobody will be able to answer here why kernel is crashing.
Send supout file to support.
OK. I will send. Thanks.
 
User avatar
ant0nPL
just joined
Topic Author
Posts: 8
Joined: Thu Jul 28, 2016 3:04 pm
Location: Radziejow / Poland

Re: RB433 rebooting because of kernel failure

Thu Jul 28, 2016 4:12 pm

Have you reloaded the OS?
Yes. I was upgrading RouterOS and firmware. Many versions. This wasn't solve the problem.
 
User avatar
ant0nPL
just joined
Topic Author
Posts: 8
Joined: Thu Jul 28, 2016 3:04 pm
Location: Radziejow / Poland

Re: RB433 rebooting because of kernel failure

Tue Aug 16, 2016 6:06 pm

I wrote an e-mail to support. I got an answer that is problem in too weak power supply.
looking at the support output files the kernel failure cause be caused because
of the PCI interface crash which usually is caused due to insufficient power.
What wireless cards are you using and what power supply you are using?

Regards,
Uldis
I had 24V/1A power supplies that I replaced to 12V/2A.
Problem solved.
:)