hi all,

i have router configuration like this :

R1 as bandwidth manager i configure as bridge.
R2 as Gateway to client distribution.

Internet ---- R1-----R2-----Client
i used queue tree at R1. my question, what interface for upload and download at R1 ? is bridge interface ?

If you have configured the router as a transparent shaper then all the management will take place on the bridge

i still not success with transparent shaper, is there some one can share with me ?

i try torch, but i didn't see any traffic passing through R1. please help..

Are you trying to torch on the bridge interface itself?

Can you see any traffic flowing through the interfaces?

Are you trying to torch on the bridge interface itself?

Can you see any traffic flowing through the interfaces?

i try to torch all interface at that router but i can see any traffic. FYI Vlan trunking through this bridge configuration.

R1 :
interface :
1 R Gateway ether 0 0 1500
2 R PTP ether 0 0 1500
3 R bridge1 bridge 0 0 1500

Flags: X - disabled, I - inactive, D - dynamic
# INTERFACE BRIDGE PRIORITY PATH-COST
0 PTP bridge1 128 10
1 Gateway bridge1 128 10


interface> monitor-traffic
interface: Gateway
received-packets-per-second: 217
received-bits-per-second: 168.1kbps
sent-packets-per-second: 233
sent-bits-per-second: 414.6kbps

interface> monitor-traffic
interface: PTP
received-packets-per-second: 250
received-bits-per-second: 882.6kbps
sent-packets-per-second: 211
sent-bits-per-second: 516.3kbps

R2 :

interface:
1 R Open-IXP ether 0 0 1500
2 R VLAN 278 - IIX vlan 0 0 1500
3 R VLAN 279 - IIX IDC vlan 0 0 1500

interface monitor-traffic
interface: "VLAN 279 - IIX IDC"
received-packets-per-second: 102
received-bits-per-second: 193.4kbps
sent-packets-per-second: 172
sent-bits-per-second: 95.9kbps