I am unable to connect to hotspot over vlan.

My setup is as follows.
RB2011(hotspot server) ------ (RB951) wlan1(hotspot) (wlan2)Main

When the device connects to wlan(hotspot) on the rb951 then device receives network configuration but does not show hotspot login page when I try to access internet. If I disable hotspot profile then internet works.

If I connect device directly to RB2011 then hotspot works fine. (add ether8 to hotspot vlan bridge)

I have no firewall rules, only rules are the ones that hotspot creates.
When I have setup hotspot profile I used “vlan hotspot bridge” as the interface

Things I have notices when I connect to wlan(hotspot)(RB951)
1. Device does show up under /ip hotspot hosts
2. Unable to ping RB2011 address
3. Tried typing hotspot address(page cannot be displayed)

When I connect directly to ether8 (hotspot vlan bridge port)
1. Hotspot login page displays when trying to access internet.

[flash=][/flash]
I dont understant sory.

But vlan ander bridge no ander ether port.
And set hotspot for all vlan and change profile server to vlans chang to profile server bridge just .

I dont understant sory.

But vlan ander bridge no ander ether port.
And set hotspot for all vlan and change profile server to vlans chang to profile server bridge just .

Let me try to explain better.

Here is what I did

RB2011
1.Create bridge (vlan-trunk)
2.Add ip address 10.0.0.1/24 to bridge
3.Add ether1 to bridge(vlan-trunk)
4.Create vlan called vlan-hotpot
5.Create bridge(vlan-bridge-hotspot)
6.add vlan-hotspot to vlan-bridge-hotspot
7.add ether8 to vlan-bridge-hotspot
8.add ip address 192.168.7.1/24 to vlan-bridge-hotspot
9.create hotspot server and chosen vlan-bridge-hotspot


RB951
1.Create bridge (vlan-trunk)
2.Add ip address 10.0.0.2/24 to bridge
3.Add ether1 to bridge(vlan-trunk)
4.Create vlan called vlan-hotpot
5.Create bridge(vlan-bridge-hotspot)
6.add vlan-hotspot to vlan-bridge-hotspot
7.add wlan1 to vlan-bridge-hotspot


When I connect to wlan1(rb951) then I see that computer does obtain network settings from the rb2011. But if I try to open webpage computer does not display hotspot login page.
On the rb2011 I see that computer is listed under /ip hotspot hosts
If I disable hotspot then internet works fine.

Another test I did………
When I connect computer to ether8(rb2011) then computer display hotspot login page.

Manage to solve issue by disable “Use IP Firewall For Vlan” under bridge setting