I use this code in a hotspot login script to move a particular rule to the topmost position. The script executes fine but rule does not get to position "0". The rule always end up below the dynamic rules.

I can manually move the rule to position "0" in winbox but the script can only move it as far as the dynamic rules. I am using ROS3.0RC5.

Anyone?

hello i, i am trying to do the exactly same thing for the same reason. will delete my message or move it here as it is the same topic.

michael

hello ,,

if we cant move the static above the dynamic with script what about moving the dynamic below the static???

anybody out there with anygood ideas??

tried this but somting is wrong in it

{

:local name

/queue simple
:foreach i in=[/queue simple] do={

:set name [get $i name]

:if ($name=!"proxy_cache") do={
/queue simple move 0 6
}
}

Hi Folks,

Have we stumbled upon a bug here?

I am able to replicate exactly what you are saying, in that dynamic queues for hotspot ALWAYS join at the top of the list, BUT this is not ALWAYS true for ALL dynamic queues.

I tried this also with my PPPOE server, and the PPPOE dynamic queues ALWAYS join at the bottom of the list (i.e. AFTER the static queues) therefore negating the need for the script that you guys (and myself) are looking for.

So, can someone at Mikrotik confirm for us what is the expected normal behaviour of dynamic queues?

Regarding the script, the first one that Skillful proposes always sends the static queues to the bottom because (I believe) we havent issued the print command before running the move command.

So I think mps01k is heading in the right direction in that we must query the queues first and then issue the move command.

I am not too good on scripting but am trying to work it through.....

I have tried and failed with a script to solve this....

Did you guys solve it?

still no luck,, and really need this!!!!!!!

I think it must be a bug.

OK, so if we all think its a bug, then lets all send in our supout to support@mikrotik.com.

So, to clarify my problem, dynamic HOTSPOT queues ALWAYS jump to the top of the list above any static simple queues. But when I do dynamic PPPOE queues they stay at the bottom, leaving the static simple queues at the top where they can work.

Just to ask you, which version ROS are you using? I have had this with 2.9.46

Regards

Alex

OK, I have written support.

Lets hope they can help us!

Rgds

Alex

Ok folks,

This is the feedback from the ever helpful Sergejs at Mikrotik Support. (Their support is great isnt it?)

Hello Alex,

Yes, it is working as designed, HotSpot queues are placed to the of the list.
It is possible to use 'on-login' and 'on-logout' script for the HotSpot user profile, when script is executed when any user logged in.

Identification is required for the 'queue simple' entry, in order script may find static 'queue' and place to the top,

you may use this script, that check for the priority (any other option might be used),

:foreach n in=[/queue simple find priority=1] do={ /queue simple move $n [:pick [/queue simple find] 0] }

Regards,
Sergejs

So he proposes a script! Which is where we started with this anyway.

I am going to start playing with this tonight. Will revert.

Rgds

Alex

OKAY!

Now I am getting the idea.

Sergejs script looks for queue priorities, then moves the script of the relevant priority to position zero. Then the script loops round and repeats until finished.

I cant pretend to understand fully all the script variables, but it is working.

So, standard pppoe and hotspot dynamic simple queues have a default priority of 8 the loweest priority.

So I changed the priority of my static simple queues to 1 and then ran the script, and hey presto all the statics jump to the top of the list.

So now I have set the script to run on each login event of the hotspot user, and it is working.

Now I wonder how to set "on user login" scripts with usermanager.... but thats for another time.

Rgds

Alex

i need this for usermanager not for only hotspot.. still no luck getting anything to work and have tried .

Hey mps01k

Can you describe fully what you are trying to do?

The script Sergejs suggest is working perfectly for me. I am using for dynamic scripts from both PPPOE server AND hotspot server. And it works for me both using usermanager and also the built in Hotspot users and PPPOE secrets.

It moves the queues to exactly where I want them, so to the original query in the this topic we have (sergejs have) solved it.....

I see that you are setting a wisp in Honduras via satelite? I am doing this in Kenya with a WISP with 2 x VSAT dishes, and all works great.

Post your config, we help you out.

Rgds

Alex

hello ,

this is the error i am getting

[admin@MikroTik] /ip hotspot active> print
Flags: R - radius, B - blocked
# USER ADDRESS UPTIME SESSION-TIME-LEFT IDLE-TIMEOUT
0 R casm 192.168.250.3 29m39s
1 R favio 192.168.250.11 1h13m32s
2 R lucia 192.168.250.14 16m5s
[admin@MikroTik] /ip hotspot active> :foreach n in=[/queue simple find priority=1] do={ /queue simple move $n [:pick [
/queue simple find] 0] }
destination number too large
[admin@MikroTik] /ip hotspot active>

can you tell me what the priority you are giving to the hotspot dynamic queues? just double click one and look for priority.

Its not clear from your dump...

i am using from 8 to 5 on the dynamic queues and 1 on the static queue i want to move.

Ok,

so you have changed the script to choose queue priority 1 which is correct, as that is the static that you have.

When I try to run this from the command prompt I get a different error like this:

"no items or no numbers defined"

But when I run it from inside the script system it works fine. I suggest you try that.

Maybe that is the problem? Because everything else looks ok.

what version of OS are you running ? i am using 3.0rc5. I just put it into the scripter and it runs but does nothing at all.

can you post an exapmple of exactly how you have it set , that it works for you and not for me?

thanks

Hi
I tried using this script and set the static simple queue priority to 1 but still not effect cause dynamic rule is still move over static.I'm using V3.0rc11 .

any suggestion ?

any one can help us in this problem ???

Tried everything some time ago, but i did not suceed.
I think it can't be done.

ok what about Mikrotik support ? is there any way to solve this problem ? any script to solve it !!!!

I use this code in a hotspot login script

Code: Select all

/queue simple move [find name=cached] 0

to move a particular rule to the topmost position. The script executes fine but rule does not get to position "0". The rule always end up below the dynamic rules.

I can manually move the rule to position "0" in winbox but the script can only move it as far as the dynamic rules. I am using ROS3.0RC5.

You can't use this sintaxis on scripting, use dinamic to find the position

Max

ok what about Mikrotik support ? is there any way to solve this problem ? any script to solve it !!!!

I think Mikrotik have fixed this already in RC11, at least now it works in my case.

ok I'm upgrad to RC11 but its still notwork.can u please post ur conf.

RC = not totally stable version (is there sucha thing anyway?) so i don't recommend using it in production environment

rc = stable if hardware = rb333

RB333 users don't have choice we can only use version 3 release.

ok then what is the best solution now ? mrz can u explain how u do it please ?

Well.. three queues:
[admin@gw-loc] /queue simple> print
Flags: X - disabled, I - invalid, D - dynamic
0 D name="<hotspot-user1>" target-addresses=10.1.101.225/32
..........
1 D name="hs-<hotspot1>" dst-address=0.0.0.0/0 interface=ether1 parent=none
..........

2 X name="queue1" target-addresses=10.1.101.225/32 dst-address=0.0.0.0/0
..........

Issue command:
/queue simple move [find name="queue1"] 0

and here you go, static queue is above dynamic:

Flags: X - disabled, I - invalid, D - dynamic
0 X name="queue1" target-addresses=10.1.101.225/32 dst-address=0.0.0.0/0
..........
1 D name="<hotspot-user1>" target-addresses=10.1.101.225/32
..........

i have the same problem with queues between local network and internet.
does anyone have an idea how to do this when using Radius (user manager, etc...)???

No, the script above don't work if you make script out of it, it work just in console, since you can't print in the script but only in console so it won't work.
As i said it can't be done afaik.

Latest version (3.10) simple script:
/queue simple move [find name="queue1"] 0

Checked all possible ways to execute it ( from terminal, scheduler, netwatch etc.) It works!

Latest version (3.10) simple script:
/queue simple move [find name="queue1"] 0

Checked all possible ways to execute it ( from terminal, scheduler, netwatch etc.) It works!

This does not work with dynamic queues created by user-manager or hotspot. The script cannot move "queue1" above any dynamic queues created by hotspot or user-manager.

Latest version (3.10) simple script:
/queue simple move [find name="queue1"] 0

Checked all possible ways to execute it ( from terminal, scheduler, netwatch etc.) It works!

This does not work with dynamic queues created by user-manager or hotspot. The script cannot move "queue1" above any dynamic queues created by hotspot or user-manager.

Exactly.
Wanted to say that but you were faster.

This issue had been fixed in ROS 3.11. This script now works as expected.

Many thanks to the Mikrotik team for this fix.

Hello

u can u use this script to do what u want automaticlly

:foreach i in=[/queue simple find dynamic=no] do={/queue simple move [/ queue simple get $i name] [/queue simple find dynamic=yes]}

Rafal

This issue had been fixed in ROS 3.11. This script

Code: Select all

/queue simple move [find name="cached"] 0

now works as expected.

Many thanks to the Mikrotik team for this fix.

This is broken again in ver3.24!

This is broken again in ver3.24!

Any comments on this from the Mikrotik squad?

Works for me.

Yes. it works but not with the expected result. Instead of moving the queue to #0, it is moved to the end.

If you are checking in winbox, make sure that queues are sorted by the first column

Queues are sorted by the first column. I get the same result in terminal when I issue command "/queue print without-paging"

When downgrade to version 3.23 and the script works as expected.

Anyone know how to force a static script to be the very last queue in the list. I can do a move command, but I guess I need to know how to find what the last queue is. The reason is, that I wish to use the dynamic queues made by userman, but in case I have other ips that were not generated by userman, I want them treated by a general PCQ rule that limits their speed.

so my command is
But of course the position is always changing.

I tried setting the position to something larger that the actual number of queues, but it always fails.

Try something like

I have tried your suggested code with no success. Queue actually moves to the top [0] position.
Any other suggestions?

there are simple script, just use
/queue simple set [find dynamic] parent=Local (parent local-network you have created)

put in On Login default user profiles in hotspot.
it will put new dynamic hotspot user under your static parent

I use this script run from scheduler...

/queue simple move [find where !dynamic] 0

It works on 5.14 and 6.7 I haven't tried it on anything else yet

correction, it works from terminal command but not from a script.. WTF

I managed to get the following to work by doing this
It now moves the simple queue to the top as it does in the terminal, I know print is not the best thing to use in scripts however it solved my problem.

I managed to get the following to work

Code: Select all

/queue simple move [find name="ITEM-TO-BE-MOVED"] 0

by doing this

Code: Select all

/queue simple print
/queue simple move [find name="ITEM-TO-BE-MOVED"] 0

It now moves the simple queue to the top as it does in the terminal, I know print is not the best thing to use in scripts however it solved my problem.

After trying scripts from top to bottom the only working script is

/queue simple print
/queue simple move [find name="ITEM-TO-BE-MOVED"] 0

Hi all,

/queue simple move [find where !dynamic] 0

the above is working on terminal, however if put on the script or scheduler, I put every 20sec interval, the scheduler work but the static queues are not going on top.

My problem is once dynamic queues are created with rate-limit when hotspot users-login the dynamic queues are place in the top and my static queues placed in the bottom making the static queues in the last option which are override by dynamic queues.

anyone can guide me how to make this work, Static queues always on top.

I don't have a Mikrotik in front of me right now to play with, but I think for some features which create dynamic queues, there's the ability to give it a hint on where to place the dynamic queues into the list. (Insert after?)

I cant find this option, can you help check

What process is creating the dynamic queues? (Hotspot, PPPoE, VPN, etc)

Hi ZeroByte,

Dynamic entries are from hotspot

found already for hotspot, its under Hotspot User Profile
and there as section to insert queue before: first or bottom

i notice that the dynamic queues from hotspot with rate-limit are not working anymore when the static queues are on top.

My static entries is on top giving dns priority 1 and http,https priority 2

If you're trying to mix QoS and rate-limiting, then you need to do things differently.

Your QoS queues need to have their targets set to the egress interface (not the IP range).
In general, I find Queue trees to be much more intuitive for QoS.

Try making a queue tree for your WAN interface and setting the appropriate rate limits / priorities for your various packet marks.
Realize that you'll need a tree for the WAN interface and a tree for the LAN interface, since trees only queue traffic that is being egressed - in other words, they only work in one direction.

check using below command,

/queue simple move [find name=queue-Name] [:pick [find] 0]