It seems like I am stupid, however not the case.

Bought a Routerboard Metal2SHPN and a 951 Router.

I have configured the 951 as an access point, no problem. However I can't get the 2SHPN to actually connect to an available wireless network. It clearly sees the available networks, but all it does when you try to connect is "searching for networks, never actually connects whether open or secured.

I followed the instructions on the board as follows, and set it up as they did the groove. Also several other setup alternatives.

http://forum.mikrotik.com/viewtopic.php?t=92112

It is set as a CPE, router and am using it in my RV. I have spent 10 hours trying different configurations. I am using winbox 3.7. Have used a groove before and ubantu and never had these problems getting it to function.

Is there ANYONE that can help with the settings so this works. Step by step?

Thanks

Enable wireless debug logging on both sides and check what is there...

Bump please !

Hello,

bumping threads without any more information ?

Did you manage to enable wireless logging as suggested by jarda ?
What's the log Output ?

Post it and post your configs ...

greets

we are willing to see your configuration, show us.