After pressing the download and install the latest software on my CCR1009 it crashed totally.
As I can see I cannot get in touch with it at all anymore.
I can connect through Serial Port ( Cannot reset it with reset button (Not Working
) I'm getting this message
Code: Select all
RouterBOOT booter 3.33
CCR1009-8G-1S-1S+
CPU frequency: 1000 MHz
Memory size: 2048 MiB
NAND size: 128 MiB
Press any key within 2 seconds to enter setup..
loading kernel... OK
setting up elf image... OK
jumping to kernel code
ERROR: no system package found!
Kernel panic - not syncing: Attempted to kill init!
Starting stack dump of tid 1, pid 1 (init) on cpu 8 at cycle 11562574912
frame 0: 0xfffffff700513c50 dump_stack+0x0/0x20 (sp 0xfffffe007eedfc08)
frame 1: 0xfffffff70050cbe8 panic+0x168/0x398 (sp 0xfffffe007eedfc08)
frame 2: 0xfffffff700055ab8 do_exit+0x1c8/0xd48 (sp 0xfffffe007eedfcb0)
frame 3: 0xfffffff700056780 do_group_exit+0xf0/0x1e8 (sp 0xfffffe007eedfd78)
frame 4: 0xfffffff700056898 __wake_up_parent+0x0/0x18 (sp 0xfffffe007eedfdb0)
frame 5: 0xfffffff700514998 handle_syscall+0x210/0x2d0 (sp 0xfffffe007eedfdc0)
<syscall while in user mode>
frame 6: 0x8a880 0x8a880 (sp 0x7feafa18)
Stack dump complete
Rebooting in 1 seconds..Resetting chip and restarting.
RouterBOOT booter 3.33
CCR1009-8G-1S-1S+
CPU frequency: 1000 MHz
Memory size: 2048 MiB
NAND size: 128 MiB
Press any key within 2 seconds to enter setup
Tried with upgrade over serial with Xterm(ExtraPutty) - so cant get any further without your help
What to do in this situation
