Community discussions

MikroTik App
 
cmit
Forum Guru
Forum Guru
Topic Author
Posts: 1547
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

3.0 beta 3 bug report(s)

Tue Nov 07, 2006 5:02 pm

I'll start this topic and put my beta 3 bug reports here - as far as I can free some time for testing.

First one:
Doing a
/export file=test
Will create a file "test.rsc" as expected, but then the console is crashing. Not sure if the export file is complete...

Best regards,
Christian Meis
 
User avatar
balimore
Forum Veteran
Forum Veteran
Posts: 884
Joined: Mon Apr 10, 2006 3:38 am

Re: 3.0 beta 3 bug report(s)

Tue Nov 07, 2006 5:07 pm

I'll start this topic and put my beta 3 bug reports here - as far as I can free some time for testing.

First one:
Doing a
/export file=test
Will create a file "test.rsc" as expected, but then the console is crashing. Not sure if the export file is complete...

Best regards,
Christian Meis
----
thanks cmit,
i think is important action....

Hasbullah.com
---
 
OrCAD
Member Candidate
Member Candidate
Posts: 133
Joined: Wed Apr 20, 2005 12:37 pm

Tue Nov 07, 2006 9:47 pm

RB532+RB564+2xCM9

Window Frequency select don't work!
I see only 2437Mhz... or manually rewrite this.

dude package? :D
 
cmit
Forum Guru
Forum Guru
Topic Author
Posts: 1547
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Wed Nov 08, 2006 9:39 am

Shutting down be (/system shutdown) gave this error:
failed to stop dudes: std failure: broken path (2)
I'm still looking where to find the dude from the dude-package ;-)
Any hints from MikroTik, perhaps?

Best regards,
Christian Meis
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1770
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: 3.0 beta 3 bug report(s)

Wed Nov 08, 2006 10:14 am

I'll start this topic and put my beta 3 bug reports here - as far as I can free some time for testing.

First one:
Doing a
/export file=test
Will create a file "test.rsc" as expected, but then the console is crashing. Not sure if the export file is complete...

Best regards,
Christian Meis
file looks complete to me!
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 26950
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia
Contact:

Wed Nov 08, 2006 10:28 am

Shutting down be (/system shutdown) gave this error:
failed to stop dudes: std failure: broken path (2)
I'm still looking where to find the dude from the dude-package ;-)
Any hints from MikroTik, perhaps?

Best regards,
Christian Meis
you shouldn't have received the package. anyway, we will fix the error. a working package will be released in one of the upcoming betas
 
cmit
Forum Guru
Forum Guru
Topic Author
Posts: 1547
Joined: Fri May 28, 2004 12:49 pm
Location: Germany

Wed Nov 08, 2006 11:41 am

Nice ;-)

Best regards,
Christian Meis
 
User avatar
stephenpatrick
Forum Veteran
Forum Veteran
Posts: 702
Joined: Fri Aug 20, 2004 12:26 pm
Location: UK
Contact:

Wed Nov 08, 2006 8:47 pm

Just noticed today,
No support yet for RTL8111B Gigabit Ethernet chipset in Beta 3
"Realtek RTL8111B PCI-E Gigabit LAN "

Please can we have this added? Would be great.

Drivers for Linux2.4 and 2.6 are here:
http://www.realtek.com.tw/downloads/dow ... wn=false#2

Regards
 
User avatar
BrianHiggins
Forum Veteran
Forum Veteran
Posts: 720
Joined: Mon Jan 16, 2006 6:07 am
Location: Norwalk, CT
Contact:

Thu Nov 09, 2006 2:26 am

hmm, didn't see this thread at first, I just made a bug post on the other beta 3 thread... I'll just post the link as to not double post :)

http://forum.mikrotik.com/viewtopic.php?p=54772#54772
 
User avatar
BrianHiggins
Forum Veteran
Forum Veteran
Posts: 720
Joined: Mon Jan 16, 2006 6:07 am
Location: Norwalk, CT
Contact:

Thu Nov 09, 2006 4:41 am

narrowed down the wireless button causing winbox to crash to a virtual AP that was upgraded from 2.9.x removed it and everything is fine now.

when mode=ap-bridge, noisefloor is showing at 5555dBm, works fine in station mode

what's the trick getting station-psudobridge to work? I can't seem to get PPPoE to work across it...

it would be nice to have the frequency selection drop down back, easier then typing...

in station mode, where can I verify that the Polling and CSMA options correctly are pulling from the AP? wireless registration -> registration properties (AP Client window) shows if NStream is turned on or not, but doesn't list Polling or CSMA status.

winbox -> files: deleting the hotspot folders causes winbox to crash

that's all for the moment. time for some NStream / CSMA testing now :)
 
nickdwhite
just joined
Posts: 11
Joined: Thu Jun 22, 2006 11:41 pm

Sat Dec 02, 2006 2:17 am

Hi guys

I'm having a problem. I upgraded a routerboard 112 (Level 4) to the new beta3. The CPU sits at 100%. It defaults with no IP address, and winbox won't connect to it. I login to it through another Routerboard (running 2.9.35) through MAC Telnet. anytime I reboot the beta3 board it resets everything - no ip addresses, no passwords saved, all packages enabled as default.

Any recommendations?

Thanks
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6697
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Mon Dec 04, 2006 8:49 am

Do you have the same resets issues with 2.9 version ?
Check if 2.9 version works correctly, report back with the results.
 
nickdwhite
just joined
Posts: 11
Joined: Thu Jun 22, 2006 11:41 pm

Tue Dec 05, 2006 9:06 pm

I didn't when it was loaded with 2.9. 2.9 worked flawlessly. I can't get it to downgrade now... upload the packages and issue the "downgrade" command, correct?
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6697
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Wed Dec 06, 2006 11:11 am

To downgrade upload 2.9 packages and 'system package downgrade', or you can use netinstall to install 2.9.
 
rockr
just joined
Posts: 5
Joined: Thu Feb 23, 2006 6:00 pm

Pseudo-Bridge Station Mode Problems

Thu Dec 07, 2006 5:24 am

3.0rc3 on a RB112 with NL-2511MP+ radio card running pseudo-bridge station mode talking to a SmartBridges AP.

Works fine from the ethernet side. Excellent connection and throughput.

When I try to access it from the wireless side with either WinBox or telnet session, I lose connectivity right after or while I try to log in.

The router seems to either reboot or stay crashed which requires a power cycle to get working again.

Tom
 
jonbrewer
Member Candidate
Member Candidate
Posts: 182
Joined: Sat Jun 05, 2004 5:56 am
Location: Wellington, New Zealand
Contact:

RTL8111B GigE

Fri Apr 13, 2007 2:13 am

Just noticed today,
No support yet for RTL8111B Gigabit Ethernet chipset in Beta 3
"Realtek RTL8111B PCI-E Gigabit LAN "

Please can we have this added? Would be great.

Drivers for Linux2.4 and 2.6 are here:
http://www.realtek.com.tw/downloads/dow ... wn=false#2
I've just come up against this having put together a router and finding that only my PCI ether adapters work, and not the onboard gigE!

Help? Can we have RTL8111B driver in 2.9 or 3.0b please?
 
jonbrewer
Member Candidate
Member Candidate
Posts: 182
Joined: Sat Jun 05, 2004 5:56 am
Location: Wellington, New Zealand
Contact:

Re: 3.0 beta 3 bug report(s)

Fri Aug 10, 2007 1:46 am

Any news from Mikrotik on support for GigE chipsets?
 
savage
Forum Guru
Forum Guru
Posts: 1265
Joined: Mon Oct 18, 2004 12:07 am
Location: Cape Town, South Africa
Contact:

Re: 3.0 beta 3 bug report(s)

Mon Aug 13, 2007 9:35 pm

Select large amount of VLAN Interfaces (32 tested with RC2) and remove the interfaces in WinBox... WinBox stops responding, when closing and reconnecting to the router with WinBox, WinBox is still screwed and does not respond...

Tested on RC2 inside VMWare, so far it happened every time (3 times in a row)... Not sure if it's a ROS thing, or perhaps a VMWare thing... :)

Also, /ip neighbor discovery sees VRRP Interfaces... Considering CDP is multicast in any case, any use in sending the multicast on the actual interface, as well as the VRRP interface, which theoretically is the same media? Same story for interface graphs as well... Not too sure at this stage if /interface vrrp was such a good idea in all honesty... VRRP really isn't a virtual interface as such...
 
Binayak
just joined
Posts: 14
Joined: Fri Dec 08, 2006 4:11 pm
Location: Mumbai, India

Re: 3.0 beta 3 bug report(s)

Fri Sep 21, 2007 10:11 pm

DO we have any documentation for version 3.0 ???????