Labels not showing SNMP data for UPS

turnip · Wed Mar 15, 2017 5:54 am

I have two CyberPower OR600ELCDRM1U UPSs with RMCARD205 monitoring cards that I'd like to monitor with The Dude. I've configured them to use SNMPv3, and SNMPwalk is working fine from The Dude, but when i put OIDs in the label, it doesn't display anything (blank, no error).

I've tried various OIDs and ways of writing them.

I'm running 6.38.5 on a CCR1009 and I've imported the MIB into The Dude. Have I missed anything?

[Device.Name]
[device_performance()][Device.ServicesDown]
Load: [oid("3.6.1.4.1.3808.1.1.1.4.2.3.0")] %
Output Voltage: [oid("3.6.1.4.1.3808.1.1.1.4.2.1.0")] V
[oid("iso.org.dod.internet.private.enterprises.cps.products.hardware.ups.upsOutput.upsAdvanceOutput.upsAdvanceOutputVoltage")]V
[oid("iso.org.dod.internet.private.enterprises.cps.products.hardware.ups.upsInput.upsAdvanceInput.upsAdvanceInputLineVoltage")]

Mon Mar 20, 2017 7:00 pm

Probably a v3 issue, test with v2

turnip · Wed Mar 22, 2017 9:37 am

Where can I get v2?

Thu Mar 23, 2017 9:12 pm

I meant snmp v2.
OH there maybe look at your oid, it is supposed to be "1.3.61.4.1.3808.1.1.1.4.2.3.0"
Load: [oid("3.6.1.4.1.3808.1.1.1.4.2.3.0")] %

turnip · Fri Mar 24, 2017 2:06 am

That was it, thanks very much!

Mon Mar 27, 2017 11:45 pm

Great, always confusing when users have different experiences!

Labels not showing SNMP data for UPS

Labels not showing SNMP data for UPS

Re: Labels not showing SNMP data for UPS

Re: Labels not showing SNMP data for UPS

Re: Labels not showing SNMP data for UPS

Re: Labels not showing SNMP data for UPS

Re: Labels not showing SNMP data for UPS

Who is online