Here are my required VLAN
VLAN10 192.168.10.1/24
VLAN20 192.168.20.1/24
VLAN30 192.168.30.1/24
Can anyone guide me how to create VLAN trunk in CCR1036 with Firewall rule that each VLAN can communicate?
Last edited by nsb on Thu Aug 30, 2018 7:12 pm, edited 3 times in total.
Re: Can anyone guide me how to create VLAN trunk in CCR1036 with Firewall rule that each VLAN can communicate?
Hi All
Can anyone guild me for my question below?
What I need is Inter-VLAN, I need all my VLAN can ping and share resources. Ask I did VLAN Trunk already, But My VLAN cannot communicate. Someone tell me, Use filter rule to accept, but I don't know how.
1- Can anyone show me how to use firewall filter rule to for this Inter-VLAN,
I use Ether1 ask Trunk Port of This 3 VLAN.
VLAN10 192.168.10.1/24
VLAN20 192.168.20.1/24
VLAN30 192.168.30.1/24
2- How to block VLAN20 from seeing shared resources?
3- Can I use Interface Bounding, Ether1 and Ether2, Ether3 together?
4- Ether1 is VLAN Trunk, But Ether2 and Ether3 was not, Will it work as bounding Interface?
5- If it will not work, How to do that Interface Bounding?
Thanks in Advance for any help.
Can anyone guild me for my question below?
What I need is Inter-VLAN, I need all my VLAN can ping and share resources. Ask I did VLAN Trunk already, But My VLAN cannot communicate. Someone tell me, Use filter rule to accept, but I don't know how.
1- Can anyone show me how to use firewall filter rule to for this Inter-VLAN,
I use Ether1 ask Trunk Port of This 3 VLAN.
VLAN10 192.168.10.1/24
VLAN20 192.168.20.1/24
VLAN30 192.168.30.1/24
2- How to block VLAN20 from seeing shared resources?
3- Can I use Interface Bounding, Ether1 and Ether2, Ether3 together?
4- Ether1 is VLAN Trunk, But Ether2 and Ether3 was not, Will it work as bounding Interface?
5- If it will not work, How to do that Interface Bounding?
Thanks in Advance for any help.
Last edited by nsb on Thu Mar 16, 2017 1:01 am, edited 1 time in total.
Re: Can anyone guide me how to create VLAN trunk in CCR1036 with Firewall rule that each VLAN can communicate?
Hi All
Can anyone guild me for my question below?
What I need is Inter-VLAN, I need all my VLAN can ping and share resources. Ask I did VLAN Trunk already, But My VLAN cannot communicate. Someone tell me, Use filter rule to accept, but I don't know how.
1- Can anyone show me how to use firewall filter rule to for this Inter-VLAN,
I use Ether1 ask Trunk Port of This 3 VLAN.
VLAN10 192.168.10.1/24
VLAN20 192.168.20.1/24
VLAN30 192.168.30.1/24
2- How to block VLAN20 from seeing shared resources?
3- Can I use Interface Bounding, Ether1 and Ether2, Ether3 together?
4- Ether1 is VLAN Trunk, But Ether2 and Ether3 was not, Will it work as bounding Interface?
5- If it will not work, How to do that Interface Bounding?
Thanks in Advance for any help.
Can anyone guild me for my question below?
What I need is Inter-VLAN, I need all my VLAN can ping and share resources. Ask I did VLAN Trunk already, But My VLAN cannot communicate. Someone tell me, Use filter rule to accept, but I don't know how.
1- Can anyone show me how to use firewall filter rule to for this Inter-VLAN,
I use Ether1 ask Trunk Port of This 3 VLAN.
VLAN10 192.168.10.1/24
VLAN20 192.168.20.1/24
VLAN30 192.168.30.1/24
2- How to block VLAN20 from seeing shared resources?
3- Can I use Interface Bounding, Ether1 and Ether2, Ether3 together?
4- Ether1 is VLAN Trunk, But Ether2 and Ether3 was not, Will it work as bounding Interface?
5- If it will not work, How to do that Interface Bounding?
Thanks in Advance for any help.