hi guys
i have users connest to my MT with lan,lan wireless, and ap client
i configered hotspot...... and put the shared key=1
the users who connect to my MT from lan and lan wireless work fine
the problem is i have 5 users connect to (one AP client)
when i see the log the 5 users keeps login and logout every 30 sec- 1 min
i discoverd that when one of the 5 users login , the other one logout
because the hotspot see the 5 users with one mac address(the mac of AP client) .
what shell i do to solve this problem
thanx
-
-
wissammohamed
Frequent Visitor
- Posts: 85
- Joined:
Most likely problem is with your AP, that is performing MAC-cloning (using one MAC-address for all connected clients).
You need to increase 'addresses-per-mac', if they are using the same login/password data, then you need to incerase 'shared-user' option.
thanx for ur reply
the users have diffrent (login/password data)
but how to increase addresses-per-mac from MT or AP
and if i increase 'addresses-per-mac , Is this process will work
note i want to put shared-user=1
-
-
wissammohamed
Frequent Visitor
- Posts: 85
- Joined:
-
-
wissammohamed
Frequent Visitor
- Posts: 85
- Joined:
You need to disable Universal client, tool that translates any client IP address to the appropriate HotSpot address.
'ip hotspot set 0', I assume that you have one HotSpot, 0 is the corresponding number of HotSpot server,
anyway 'ip hotspot print' is required before 0 or any other number will be used.
'ip hotspot set 0', I assume that you have one HotSpot, 0 is the corresponding number of HotSpot server,
anyway 'ip hotspot print' is required before 0 or any other number will be used.
Who is online
Users browsing this forum: No registered users and 2 guests