With "Use IP Firewall" enabled, I often run a simple queue on a port. Periodically, that queue will only limit upload, not download.
I just moved a port that was running correctly (with a queue applied to that port) from one bridge to another. Now that queue only works on upload, not download.
I created a new queue with the same parameters, but it still does not work correctly.
Is there a specific order in which to add a port to a bridge and then add a queue?
Thank you,
Chris
-
-
Revelation
Member
- Posts: 336
- Joined:
Re: Queue Not Limiting Download
Not sure how the rest of your config works.... Here's an example that I threw together where I can limit the download and upload of a specific IP behind my Mikrotik using simple queues.
Code: Select all
Flags: X - disabled, I - invalid, D - dynamic
0 XI name="Test" target=10.10.25.66/32 parent=none packet-marks="" priority=8/8 queue=default-small/default-small
limit-at=0/0 max-limit=512k/512k burst-limit=768k/768k burst-threshold=768k/768k burst-time=10s/10sRe: Queue Not Limiting Download
I'm limiting the speed on a port-by-port basis. I've generally had trouble with port speed queues, but I thought I had the issue resolved. It has been working correctly for months. All I changed was the bridge the port was connected to.
This is a queue that was functioning:
The only connection to this port is through a bridge. I changed the bridge port, and now the download is unlimited on the queue, even though the queue has not changed.
I've tried re-entering the queue, but it does not help.
This is a queue that was functioning:
Code: Select all
/queue simple
add limit-at=10M/10M max-limit=10100k/10100k name=TH-5M target=\
ether2-TH-Service
I've tried re-entering the queue, but it does not help.
Re: Queue Not Limiting Download
BUG?
I got the queue to work. This is on an RB750 running bugfix v6.32.4.
This does not work, and only limits upload:
This does work, and limits both upload and download correctly:
If I check in WinBox, the queue now shows two targets. BUT, in the CLI, printing the queues and the configuration export only shows ether2. Is there something I'm missing here?
I got the queue to work. This is on an RB750 running bugfix v6.32.4.
This does not work, and only limits upload:
Code: Select all
/queue simple
add max-limit=10100k/10100k name=queue1 target=ether2Code: Select all
/queue simple
add max-limit=10100k/10100k name=queue1 target=ether2,0.0.0.0/0Re: Queue Not Limiting Download
Have you tried with bridge ip firewall disabled?
Re: Queue Not Limiting Download
The queue does not function at all with "Use IP Firewall" disabled.Have you tried with bridge ip firewall disabled?
Re: Queue Not Limiting Download
Have you tried to remove the port from the bridge?
I use a simple que
/queue simple
add max-limit=1M/5M name=queue1 target=ether1-gateway
I use a simple que
/queue simple
add max-limit=1M/5M name=queue1 target=ether1-gateway
Re: Queue Not Limiting Download
I have not. I need the bridge for my system to function correctly (specifically with IP usage, I cannot dedicate a /30 to each port I need to limit).Have you tried to remove the port from the bridge?
Re: Queue Not Limiting Download
Disable Bridge
Interfaces> "Select Ether Port" >General
Master Port > "Select Port to make master" to bridge ports you want to bridge this way
That's how I sorted the Queue problem on my metal
Interfaces> "Select Ether Port" >General
Master Port > "Select Port to make master" to bridge ports you want to bridge this way
That's how I sorted the Queue problem on my metal
You do not have the required permissions to view the files attached to this post.
-
-
facubertran
just joined
- Posts: 19
- Joined:
- Location: Argentina
- Contact:
Re: Queue Not Limiting Download
Hi, Could you find the solution?
Re: Queue Not Limiting Download
Same bug here:
Queue over ether3 only controls upload:
Queue over ether3 only controls upload: