Hi,

We had to do a new mikrotik setup and got outselves a D946GZIS motherboard, disabled SATA in the BIOS and installed MT on FLASH, now it will not recognize the onboard LAN controller.

/system resource pci print detail

0 device="04:08.0" name"unknown device (rev: 1)" vendor="Intel Corporation" category="Ethernet controller" vendor-id="0x8086" device-id="0x1094" irq=11 memory=0x50000000-0x50000FFF io=0x1000-0x103F


....


/driver print > no output ....

....

/interface ethernet print > no output

.....

motherboard details

Intel® Desktop Board D946GZIS

10/100 Mbits/sec LAN subsystem using the
Intel® 82562G Platform LAN Connect (PLC) device


any help will be great...

regards
RB

0 device="04:08.0" name"unknown device (rev: 1)" vendor="Intel Corporation" category="Ethernet controller" vendor-id="0x8086" device-id="0x1094" irq=11 memory=0x50000000-0x50000FFF io=0x1000-0x103F

Pretty obvious. The card arn't supported...

The chip should be in the unified intel driver, however it's 10/100 and maybe they didn't upgrade the e100 package recently.

v3 has the latest open intel driver. v2.9 does not have it

Hi all, this chipset is already suported in ROS V 3???