HI,

I have several x86 and Mikrotik systems running on ROS 6.39.3 with a APC Smart-UPS C 1000 FW:UPS 10.0 / ID=1005
The UPS is connected by USB
They show the following info:
- Model
- Serial Number
- Manufacture date
- Nominal Battery Voltage
- Run time left
-Battery Change
- Line Voltage
- Status: On Line

However, i have some newer systems running ROS 6.40.7 and 6.41.2 and i am missing a lot of UPS info on these systems.
The connected UPS's are exactly the same as stated above, with same firmware and ID.
But all the info i get is:
- Serial Number
- Run time left
- Status: On Line

Is this a bug or is Mikrotik dropping support for APC Smart UPS's?

Best Regards,

Ammer

Hello

In the changelog as per link below, I see that in version 6.42 there have been some modifications regarding the UPS.

If possible, upgrade to test.

Information about what was updated in the versions
https://mikrotik.com/download/changelogs/

Hi Leoservices,

I updated to 6.42.1 and still no change in the UPS information shown.

I'll send a support request to Mikrotik.

Did you get back any support/information on how to get this solved or will downgrading be the only option to get a Smart UPS working with a MikroTik device?