Need Help on Route [or Rule]

• Quote
• #1

Fri Feb 23, 2007 2:10 am

Dear guys,

I have setup a router using MT 2.9.27 with 4 ethernet as below :
- eth1 = ISP IP 2xx.xxx.xxx.xxx
- eth2 = client IP 192.168.10.x [I set multiple IP with different subnet such as 192.168.10.5/30, 192.168.10.13/30 etc], IP 192.168.240.254/24 [to AP IPs], IP 192.168.241.254/24 [to client radios]
- eth3 = client IP 172.168.17.x
- eth4 = dedicated monitoring for me IP 172.168.19.1/30

All default routes are created by MT automatically.
Top one have destination=0.0.0.0/0 gateway=2xx.xxx.xxx.xxx interface=eth1

I want to able to ping/browse from eth4 172.168.19.2 [my computer] to AP in eth2 192.168.240.x/24 and to client radios in eth2 192.168.241.x/24.

I'm trying various way from creating routing mark, routing rule [ip->route->rule] but none are working.

Anyone could help me please ?
I'm really dumb in routing

• Quote
• #2

Fri Feb 23, 2007 10:13 am

• Quote
• #3

Fri Feb 23, 2007 11:12 am

• Quote
• #4

Fri Feb 23, 2007 1:09 pm

• Quote
• #5

Fri Feb 23, 2007 1:16 pm

Thanks all for the reply.

Finally after read some other thread, I found that the APs could not be ping because I don't put gateway IP on every APs IP.
Now the problem solved...silly me

Thanks again.