Yes, I know... Press on the D to disable...
But I rephrase my question, how to disable the DHCP server on my Mikrotik Wap ac and maintain a fully working network, because when I disable the DHCP server, devices that are trying to connect, don't seem to find the DHCP server on the router (Archer C7) and got no IP address. Do I have to refer to this router in some way or so?
-
-
MangleRule
Frequent Visitor
- Posts: 62
- Joined:
Re: How to disable DHCP server?
It sounds like you need to setup a bridge on your wAP AC. From the product page it looks like the wAP AC has a single ethernet interface and two wireless interfaces.
Once the interfaces are bridged, your Archer device should be able to reply to DHCP requests over the wireless.
Code: Select all
# Setup a bridge for your interfaces
/interface bridge add name=local-bridge
# Add the interfaces to the bridge
/interface bridge port
add bridge=local-bridge interface=ether1
add bridge=local-bridge interface=wlan1
add bridge=local-bridge interface=wlan2
Once the interfaces are bridged, your Archer device should be able to reply to DHCP requests over the wireless.
Re: How to disable DHCP server?
I dare not to cheer too loud, but this seems to do the trick...
Another question: what do you feel/think when you all read this kind of questions?
Another question: what do you feel/think when you all read this kind of questions?
-
-
MangleRule
Frequent Visitor
- Posts: 62
- Joined:
Re: How to disable DHCP server?
I dare not to cheer too loud, but this seems to do the trick...
Feel free to cheer safely, there is not really room for error with that setup.
what do you feel/think when you all read this kind of questions?
I just see an opportunity to help someone enjoy MikroTik and prevent some discouragement. Everyone has to start somewhere.
Who is online
Users browsing this forum: No registered users and 28 guests