Any One Wireless Expert here!
i want to hire a wirelss expert who can help me on disconnection issues i have mant19s as AP and mix of LHG and UBNT devices as CPE.
Re: Any One Wireless Expert here!
how about if you make a normal topic, with clear question in topic title, and clear problem description?
Re: Any One Wireless Expert here!
Although my wireless clients are in range they keep disconnecting, why?how about if you make a normal topic, with clear question in topic title, and clear problem description?
Re: Any One Wireless Expert here!
Could you be more elaborate please ..
You have asked a question: "Doctor, I'm ill ... why?"
You have asked a question: "Doctor, I'm ill ... why?"
Re: Any One Wireless Expert here!
Ha Ha that's funny!Could you be more elaborate please ..
You have asked a question: "Doctor, I'm ill ... why?"
Anyway. if you have UBNT as CPE, monitor their signal level and noise floor to start with
PS: there would be many many reason. you want to ask, what has changed?
Re: Any One Wireless Expert here!
I guess you need to elaboratemore on what do you meen by disconnects?? Like really disconencting to the wifi signal meaning they are kick out and would need to reconnect? Or is the signal streng bad? Or maybe they are connected to wifi and have a good signal strength but they cant get internet?
Re: Any One Wireless Expert here!
Hello All i am using mANT box as AP and i have mixture of CPE of Mikrotik and UBNT. i am having too much disconnection on peak hours as attached below, there is good line of sight between AP and CPEs if some body can help me on this please.how about if you make a normal topic, with clear question in topic title, and clear problem description?
You do not have the required permissions to view the files attached to this post.
Re: Any One Wireless Expert here!
i am using mANT box as AP and i have mixture of CPE of Mikrotik and UBNT. i am having too much disconnection on peak hours as attached below, there is good line of sight between AP and CPEs if some body can help me on this please.I guess you need to elaboratemore on what do you meen by disconnects?? Like really disconencting to the wifi signal meaning they are kick out and would need to reconnect? Or is the signal streng bad? Or maybe they are connected to wifi and have a good signal strength but they cant get internet?
You do not have the required permissions to view the files attached to this post.
Re: Any One Wireless Expert here!
i am using mANT box as AP and i have mixture of CPE of Mikrotik and UBNT. i am having too much disconnection on peak hours as attached below, there is good line of sight between AP and CPEs if some body can help me on this please.Could you be more elaborate please ..
You have asked a question: "Doctor, I'm ill ... why?"
You do not have the required permissions to view the files attached to this post.
Re: Any One Wireless Expert here!
-68,-74 are not good signals, what is CPE device's distance, also good to know noise floor, are all devices disconnecting or just CPEs with signal >-65
Re: Any One Wireless Expert here!
what about -63s? All the devices are with in 2km distances. Most of all devices are disconnected which are <-65 as well.-68,-74 are not good signals, what is CPE device's distance, also good to know noise floor, are all devices disconnecting or just CPEs with signal >-65
Re: Any One Wireless Expert here!
In your log I can see only CPEs with bad signals disconnecting.
LHG->MantBox15 2km >-63 signal dude probably LOS is not so good, theoretical signal level should be in range of -50, -58
if you are sure you have good LOS maybe your mantBox angle is not adjust well
MantBox is 120 degree (Horizontal Elevation) sector antenna you should be aware of that, also you can try adjusting little up and down (Vertical Elevation) see if you have any signal improvement
You are using 802.11 protocol theoretically CPEs with bad signals may be the "trigger" to this problem with nv2,airmax protocols (TDMA) you don't have that.
Thats why connecting UBQ and Mikrotik CPEs on same AP is not wrong but bad idea.
LHG->MantBox15 2km >-63 signal dude probably LOS is not so good, theoretical signal level should be in range of -50, -58
if you are sure you have good LOS maybe your mantBox angle is not adjust well
MantBox is 120 degree (Horizontal Elevation) sector antenna you should be aware of that, also you can try adjusting little up and down (Vertical Elevation) see if you have any signal improvement
You are using 802.11 protocol theoretically CPEs with bad signals may be the "trigger" to this problem with nv2,airmax protocols (TDMA) you don't have that.
Thats why connecting UBQ and Mikrotik CPEs on same AP is not wrong but bad idea.
Re: Any One Wireless Expert here!
We have tried almost everything that you said its not with only some customer its with most of all my wireless customers.In your log I can see only CPEs with bad signals disconnecting.
LHG->MantBox15 2km >-63 signal dude probably LOS is not so good, theoretical signal level should be in range of -50, -58
if you are sure you have good LOS maybe your mantBox angle is not adjust well
MantBox is 120 degree (Horizontal Elevation) sector antenna you should be aware of that, also you can try adjusting little up and down (Vertical Elevation) see if you have any signal improvement
You are using 802.11 protocol theoretically CPEs with bad signals may be the "trigger" to this problem with nv2,airmax protocols (TDMA) you don't have that.
Thats why connecting UBQ and Mikrotik CPEs on same AP is not wrong but bad idea.
Re: Any One Wireless Expert here!
Dude just told you, your clients signal level is very very bad for 2km distance.We have tried almost everything that you said its not with only some customer its with most of all my wireless customers.In your log I can see only CPEs with bad signals disconnecting.
LHG->MantBox15 2km >-63 signal dude probably LOS is not so good, theoretical signal level should be in range of -50, -58
if you are sure you have good LOS maybe your mantBox angle is not adjust well
MantBox is 120 degree (Horizontal Elevation) sector antenna you should be aware of that, also you can try adjusting little up and down (Vertical Elevation) see if you have any signal improvement
You are using 802.11 protocol theoretically CPEs with bad signals may be the "trigger" to this problem with nv2,airmax protocols (TDMA) you don't have that.
Thats why connecting UBQ and Mikrotik CPEs on same AP is not wrong but bad idea.
-
-
networkfudge
Trainer
- Posts: 136
- Joined:
Re: Any One Wireless Expert here!
As others have pointed your signal levels are terribly low for such short distances. This means that your links are misaligned, not to mention also potentially riddled with LOS, fresnel, intererference and frequency problems.
If you don't take care to make a good job at the physical layer, then nothing you do after that is going to help you much.
If you don't take care to make a good job at the physical layer, then nothing you do after that is going to help you much.
You do not have the required permissions to view the files attached to this post.
Re: Any One Wireless Expert here!
Have you got any photos or video that shows best way to align mANT 19s.As others have pointed your signal levels are terribly low for such short distances. This means that your links are misaligned, not to mention also potentially riddled with LOS, fresnel, intererference and frequency problems.
If you don't take care to make a good job at the physical layer, then nothing you do after that is going to help you much.
Re: Any One Wireless Expert here!
what is wrong with this customer this is in distance of 2km this customer is using disclite as cpe.We have tried almost everything that you said its not with only some customer its with most of all my wireless customers.In your log I can see only CPEs with bad signals disconnecting.
LHG->MantBox15 2km >-63 signal dude probably LOS is not so good, theoretical signal level should be in range of -50, -58
if you are sure you have good LOS maybe your mantBox angle is not adjust well
MantBox is 120 degree (Horizontal Elevation) sector antenna you should be aware of that, also you can try adjusting little up and down (Vertical Elevation) see if you have any signal improvement
You are using 802.11 protocol theoretically CPEs with bad signals may be the "trigger" to this problem with nv2,airmax protocols (TDMA) you don't have that.
Thats why connecting UBQ and Mikrotik CPEs on same AP is not wrong but bad idea.
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 6 guests