LOW Signal over 4000msnm

emcentellas · Sat Mar 03, 2007 4:16 am

Hello
i have this configuration
AP= RB532+SR2+Omni 15dbi
cliente1= edimax 23dbm+ panel 14dbi distancia= 700mts sigmal = -86
cliente2= ediamx 23dbm+grilla24 dbi distancia = 6km signal= -88

any idea for this

Saludos

wildbill442 · Sat Mar 03, 2007 6:15 am

15dBi omni! jesus, whats the vertical beamwidth on that?? 1 degree?

mneumark · Sat Mar 03, 2007 7:44 am

emcentellas,

What is your noise floor look like?

Diganet · Sat Mar 03, 2007 4:46 pm

Hello
i have this configuration
AP= RB532+SR2+Omni 15dbi
cliente1= edimax 23dbm+ panel 14dbi distancia= 700mts sigmal = -86
cliente2= ediamx 23dbm+grilla24 dbi distancia = 6km signal= -88

any idea for this

Saludos

How is that omni polarized? With those radios and antennas you should get much much better signal levels..

/Henrik

emcentellas · Sun Mar 04, 2007 2:42 am

hello mneumark

noise floor is
-79 dBm
saludos

jo2jo · Sun Mar 04, 2007 6:11 am

that is your issue right there...you need to switch channels until you find one well above the actual Rx of the ap you are connecting too

mneumark · Sun Mar 04, 2007 10:53 am

emcentellas,

jojo is right. I would survey your area again and see if there is another channel you can use that has a better noise floor. Remember the farther away from 0 the better.

Your noise floor right now is at -79 and your clients are -86-88. So your best bet is to see if you can find a channel with -90 to -100

LOW Signal over 4000msnm

LOW Signal over 4000msnm

Re: LOW Signal over 4000msnm

noise floor