wAP 60Gx3
Does it have 3 interface that means 3x2 Ghz Channels?
(highliting is mine)... It uses breakthrough antenna design, that consists of 96 elements to provide unprecedented 180 degree beam-forming coverage (three times bigger than regular wAP 60G AP!) ...
OK, 4 port switch with POE?wrong highlight, though. I would highlight the previous sentence, where it says that there are more antenna elements, so it's basically a sector design. not more interfaces.
PleaseIt would be nice to be able to connect 3x as many stations per sector though - still limited to max 8.
there is no performance difference. the new sector wAP60 simply has a wider antenna angle, that is all.
Can somebody update me on this...- InterCell - LTE Base Stations, preorders available
Yes it is Base Station, and yes for the now supported Bands, are only licensedCan somebody update me on this...- InterCell - LTE Base Stations, preorders available
I understood LTE is cell operator's stuff. And the LTE devices Mikrotik sells are to pickup that signal and enhance it.. But you need to connect to cell op's network with cell op's simm card.
Now MT has 'base station'........
Is this aimed at the cell op's world?
Do you need a license to use such base station? Do we need a frequency license? (So we need to bring a couple of millions to buy them from the goverment and in competition to the 'big' boys like Vodafone etc......?)
Can every LTE client (Mikrotik!, mobiles) connect to that base station?
Can somebody enlight me about the LTE and how we as Mikrotik users / WISP can make use of it?
Its clear, what about count of 60 GHz clients??This InterCell is not really for WISP. It is for companies who want to operate LTE cell towers, either for public or private reasons. Yes, you probably need a license from the regulator. These InterCell devices only support data (no voice calls, except whatsapp/skype etc over data connection). The InterCell can also be used to interconnect a lot of devices, like our LtAP units, in smaller areas where wifi is crowded or there is no line of sight. Still you need the license for it.
Whats about smaller Channels?chipset limit is 8
Why not for WISPs?This InterCell is not really for WISP. It is for companies who want to operate LTE cell towers, either for public or private reasons. Yes, you probably need a license from the regulator. These InterCell devices only support data (no voice calls, except whatsapp/skype etc over data connection). The InterCell can also be used to interconnect a lot of devices, like our LtAP units, in smaller areas where wifi is crowded or there is no line of sight. Still you need the license for it.
That's a pity! Can we expect some change in the future?chipset limit is 8
Yes, what about smaller channels?Whats about smaller Channels?chipset limit is 8
But ignite metrolinq (has different chipset, but wigig too) can use 12 clients. Any sollution in future? And somebody from Mikrotik on MUM said, that it is software limit. But it can be a mistake.chipset limit is 8
Any better chipsets (802.11ay?) on the horizon? Ideally, backwards-compatible with current 802.11ad stations so that only the AP needs to be upgraded.chipset limit is 8
there was a press announcement from Qualcomm and Mikrotik back in october around the 17th or so, emphasising Qualcomm's upcoming QCA64x8 and QCA64x1 chipsets, promising .11ay.chipset limit is 8
let's be easy with that. if you can't have more than MCS9 (SC), then 1Gbps is just ok. .11ad doesn't have channel bonding, so in general you couldn't use the available extra juice anyway.channel capacity is so much higher than what we can use currently.
you can be OK with this channel mapping. you can have the 100Mbps clients run the same high MCS, and ultimately serve more safely and do buffering on the FE part. i'm more interested in TDD - cause this is the key to boost client numbers.Whats about smaller Channels?
CRS332-32S+RM + community feedback == CRS326-24S+2Q+RM in latest MUM opening presentations.CRS332-32S+RM
CRS354-48P-4S+2Q+
CRS354-48G-4S+2Q+
still nothing ?
:"(
The interCell is a very good and welcome idea for those with LTE licensed in building small cell to extend coverage, however Mikrotik is missing an important emerging band, B42. It took a long time before Mikrotik released ODU in that Band infact only recently (I mean the LHG 4G kit -RBLHGR&R11e-4G). Are we going to see Intercell in B42 also?In this MikroTik newsletter:
- new 8 x SFP+ port switch CRS309-1G-8S+IN
- new wAP 60Gx3 60GHz Sector Base Station
- new low cost 60GHz CPE LHG Lite60
- InterCell - LTE Base Stations, preorders available
- new active direct attach 5m cable
- RB4011 rackmount ears
- MUM schedule
- MUM Europe 2019 in Austria
Download newsletter here:
https://download2.mikrotik.com/news/news_87.pdf
We are getting lot of requests for B42 LTE Base Station. But we would need to understand more which exact band is needed as it looks more that B48 is the main band that we would need to focus.The interCell is a very good and welcome idea for those with LTE licensed in building small cell to extend coverage, however Mikrotik is missing an important emerging band, B42. It took a long time before Mikrotik released ODU in that Band infact only recently (I mean the LHG 4G kit -RBLHGR&R11e-4G). Are we going to see Intercell in B42 also?In this MikroTik newsletter:
- new 8 x SFP+ port switch CRS309-1G-8S+IN
- new wAP 60Gx3 60GHz Sector Base Station
- new low cost 60GHz CPE LHG Lite60
- InterCell - LTE Base Stations, preorders available
- new active direct attach 5m cable
- RB4011 rackmount ears
- MUM schedule
- MUM Europe 2019 in Austria
Download newsletter here:
https://download2.mikrotik.com/news/news_87.pdf
I am so pumped up for these product but still nothing...Is there any news on the CRS312-4C-8XG?
It was announced April 2018.
I know, right? It hits all the sweet spots: low end CPU for those of us that don't really need routing (to keep the cost way way down as well) with the non-blocking bandwidth we all want in a switch at an affordable price ($400 maybe?) to crush other brands that are way overpriced for a simple home setup.I am so pumped up for these product but still nothing...Is there any news on the CRS312-4C-8XG?
It was announced April 2018.
I will keep looking for them.
Ohhh. This is something very very interesting for me. Would like to know details about it. Does it include vEPC inside the cell? Can it connect to operator EPC? What will be the software? What is the roadmap? Does Mikrotik has strong interest to continue this solution until 5G (maybe too early to ask)?This InterCell is not really for WISP. It is for companies who want to operate LTE cell towers, either for public or private reasons. Yes, you probably need a license from the regulator. These InterCell devices only support data (no voice calls, except whatsapp/skype etc over data connection). The InterCell can also be used to interconnect a lot of devices, like our LtAP units, in smaller areas where wifi is crowded or there is no line of sight. Still you need the license for it.
As written in the PDF of Intercell it will support built-in EPC with up to 256 clients and also will support external EPC if you have an existing EPC. It will feature special dedicated software (not RouterOS). Currently only B38/B39 bands, what LTE bands you are looking for? Currently it is too early to talk on the 5G Base Station.Ohhh. This is something very very interesting for me. Would like to know details about it. Does it include vEPC inside the cell? Can it connect to operator EPC? What will be the software? What is the roadmap? Does Mikrotik has strong interest to continue this solution until 5G (maybe too early to ask)?This InterCell is not really for WISP. It is for companies who want to operate LTE cell towers, either for public or private reasons. Yes, you probably need a license from the regulator. These InterCell devices only support data (no voice calls, except whatsapp/skype etc over data connection). The InterCell can also be used to interconnect a lot of devices, like our LtAP units, in smaller areas where wifi is crowded or there is no line of sight. Still you need the license for it.
Thank you Uldis. I think B38/B39 is fine in initial stage. Those frequencies are popular among most of countries.As written in the PDF of Intercell it will support built-in EPC with up to 256 clients and also will support external EPC if you have an existing EPC. It will feature special dedicated software (not RouterOS). Currently only B38/B39 bands, what LTE bands you are looking for? Currently it is too early to talk on the 5G Base Station.Ohhh. This is something very very interesting for me. Would like to know details about it. Does it include vEPC inside the cell? Can it connect to operator EPC? What will be the software? What is the roadmap? Does Mikrotik has strong interest to continue this solution until 5G (maybe too early to ask)?This InterCell is not really for WISP. It is for companies who want to operate LTE cell towers, either for public or private reasons. Yes, you probably need a license from the regulator. These InterCell devices only support data (no voice calls, except whatsapp/skype etc over data connection). The InterCell can also be used to interconnect a lot of devices, like our LtAP units, in smaller areas where wifi is crowded or there is no line of sight. Still you need the license for it.
Iirc CRS332-32S+RM evolved into CRS326-24S+2Q+RMCRS332-32S+RM
CRS354-48P-4S+2Q+
CRS354-48G-4S+2Q+
still nothing ?
:"(
Great choice of thread to ask such question!Hello it's possible to a SFP+ Ethernet Module to have POE-out capability ?
ThanksGreat choice of thread to ask such question!Hello it's possible to a SFP+ Ethernet Module to have POE-out capability ?
No it's not. SFP and SFP+ have standardized maximum power draw (which is relatively low) so unless you'd like to power some ultra low powered device there's no chance. Also SFP is powered by 3V so it's quite low for PoE standards. Average SFP/SFP+ draws around 1W up to 1.5W for long distance ones. It'd be hard to find device that can be powered with that
Of course you could break those standards and make specialized switch and specialized modules but those modules would burn any normal hardware, not suited for such current.
We will see on the other bands when we will release the current series but it is possible that we could look at 3.5ghz bands. All depends on the demand. As currently the 3.5ghz is more popular in US.b48 easier to license in eu countries..
what is the performance of that lte ""wimax"" product? no info regarding speeds
Security Announcements Blog with RSS feedDear all how can i receive on my mail information about critical router OS updates ? Im alreaady registered, but there is still no notifications....
thx
Arek
Hi. Blog is outdated....i need some notification everytime when new Router OS will be available.Security Announcements Blog with RSS feedDear all how can i receive on my mail information about critical router OS updates ? Im alreaady registered, but there is still no notifications....
thx
Arek
viewtopic.php?t=137284
MikroTik script checking for updates every hour and sending mail I guess. You can't get update notification faster than that lol...Hi. Blog is outdated....i need some notification everytime when new Router OS will be available.Security Announcements Blog with RSS feedDear all how can i receive on my mail information about critical router OS updates ? Im alreaady registered, but there is still no notifications....
thx
Arek
viewtopic.php?t=137284
Thx
https://mikrotik.com/download.rssHi. Blog is outdated....i need some notification everytime when new Router OS will be available.Security Announcements Blog with RSS feedDear all how can i receive on my mail information about critical router OS updates ? Im alreaady registered, but there is still no notifications....
thx
Arek
viewtopic.php?t=137284
Thx
Thank you for sharing this one. It's very helpful!
Does MikroTik have also other Twitter accounts?
Holy crap, bots get smarter every dayDear all how can i receive on my mail information about critical router OS updates ? Im alreaady registered, but there is still no notifications
up up upCRS354-48P-4S+2Q+
CRS354-48G-4S+2Q+
still nothing ?
:"(