Code: Select all
/interface bridge vlan add bridge=bridge tagged=bridge untagged=ether1 vlan-ids=101
/interface bridge set ingress-filtering=yes 0
wAP 60G tagged to untagged vlan?
I'm new to Mikrotik and trying to deploy a PtMP sector with each client in a different vlan. I'd like to avoid adding a switch at the client site. How can I send tagged vlans into the AP and untag them at the STATION?
I already have the MGMT working on a tagged vlan, but untagging the customer traffic has not worked yet. How close is the following concept?
Thank you!
You do not have the required permissions to view the files attached to this post.
Re: wAP 60G tagged to untagged vlan? [SOLVED]
Ingress filtering is set on the bridge port as well as setting pvid...........
Vlan filtering is set on the bridge.
Suggest have a read through this excellent reference......
viewtopic.php?f=13&t=143620
Vlan filtering is set on the bridge.
Suggest have a read through this excellent reference......
viewtopic.php?f=13&t=143620
Re: wAP 60G tagged to untagged vlan?
Thank you very much! I was able to get it working using the documents you provided.
Code: Select all
/interface vlan add interface=bridge name=MGMT vlan-id=10
/ip address add address=10.50.1.10/25 interface=MGMT
/interface bridge port set pvid=101 0
/interface bridge vlan add bridge=bridge untagged=ether1 tagged=wlan60-1 vlan-ids=101
/interface bridge vlan add bridge=bridge tagged=bridge,wlan60-1 vlan-ids=10
/interface bridge set bridge vlan-filtering=yes
Who is online
Users browsing this forum: No registered users and 12 guests