Hi,
I believe I really tried all combinations of APN and authentication I found somewhere...
APNs: web.vodafone.de, home.vodafone.de, event.vodafone.de
Authentication PAP: vf/vf, "blank"/"blank", vodafone/vodafone, web/web
Authentication PAP: vf/vf, "blank"/"blank", vodafone/vodafone, web/web
What I am wondering. Should I get something in the LTE scan or seeing some LEDs on even I am not connected to a Cell? I can see my cell phone having a good service but maybe the SXT does not have any...
Edit1:
I play a little bit with the position of the device and it looks like I get a connection to a cell
At least that is what I believe ...
00:26:38 lte,async,raw lte1: sent AT%MEAS="7"
00:26:38 lte,async,raw lte1: rcvd CQI: 0
00:26:38 lte,async,raw lte1: sent AT%MEAS="8"
00:26:38 lte,async,raw lte1: rcvd Signal Quality: RSRP = -97, RSRQ = -11, SINR = 22, RSSI = -78
00:26:38 lte,async,raw lte1: sent AT%PCONI
00:26:38 lte,async,raw lte1: rcvd duplexing mode: FDD
00:26:38 lte,async,raw lte1: rcvd Transmission mode: Tx diversity
00:26:38 lte,async,raw lte1: rcvd Bandwidth: 5
00:26:38 lte,async,raw lte1: rcvd EARFCN: 1300
00:26:38 lte,async,raw lte1: rcvd Global Cell ID: 01BA8200
00:26:38 lte,async,raw lte1: rcvd Physical Cell ID: 210
00:26:38 lte,async,raw lte1: rcvd HNBN: N/A
00:26:41 lte,async,raw lte1: sent AT%MEAS="7"
00:26:41 lte,async,raw lte1: rcvd CQI: 0
00:26:41 lte,async,raw lte1: sent AT%MEAS="8"
00:26:41 lte,async,raw lte1: rcvd Signal Quality: RSRP = -96, RSRQ = -10, SINR = 22, RSSI = -79
00:26:41 lte,async,raw lte1: sent AT%PCONI
00:26:41 lte,async,raw lte1: rcvd duplexing mode: FDD
00:26:41 lte,async,raw lte1: rcvd Transmission mode: Tx diversity
00:26:41 lte,async,raw lte1: rcvd Bandwidth: 5
00:26:41 lte,async,raw lte1: rcvd EARFCN: 1300
00:26:41 lte,async,raw lte1: rcvd Global Cell ID: 01BA8200
00:26:41 lte,async,raw lte1: rcvd Physical Cell ID: 210
00:26:41 lte,async,raw lte1: rcvd HNBN: N/A
Question: why can this be, if my phone is just laying on my table and is having a good service
But it looks like I still have a registration-status: denied... can this be caused by the wrong
/interface lte info lte1
pin-status: ok
registration-status: denied
functionality: full
manufacturer: MikroTik
model: R11e-4G
revision: R11e-4G_V005
imei: 359147090015765
imsi: 262021408436965
subscriber-number: ,"01721003271",129
Thanks
Josef