Hi guys.
Im trying to get 95 percentile traffic graph for my mkt device on cacti platform.
This is what I tryed so far:
cacti versions: 1.2.4 and 1.1.19.
device templates: cisco router , default snmp device , net-snmp device.
mikrotik devices CCR 1009 with routerOS version 6.42.10 and 6.42.6.
This is the result for all possible combinations.
If I choose in/out bits (64-bit,95th) , I got nan.
If I choose in/out bits (95th) I got a chopped graph when traffic goes above 110mbbps aprox.
If I choose in/out bits (64-bit) , I got nan.
If I choose in/out bits ,I got a chopped graph when traffic goes above 110mbbps aprox.

So trying with all combinations have same problem ... I dont know what to do.
It is very frustrating since cacti is very easy to use and never have this problem before.
BTW: Monitoring from the dude , I can graph same interfaces properly ... but there is not 95th on the dude.

Any help would be great,
Regards.
Leandro.

seems to be a routerOS version issue:
After install a device with 6.43.16 routerOS , cacti can create traffic graph properly.
Regards.

Anyway with ROS 6.43 works well. I'm not tested yet with 6.44. Cacti 1.1.38.

Regards.